|
I have uploaded the upgrade software and some docs
on siemens M20 to :
In order to upgrade you will have to open the M20
terminal.
The software works from Windows OS, so you will
have to connect your M20 to some win98/2000 host.
Detailed instructions are inside.
----- Original Message -----
Sent: Thursday, October 18, 2001 6:39
PM
Subject: RE: Siemens M20 and Kannel
Ok.
The first thing = upgrade it to 5.4 or later
firmware.
Than check your conf file and
connection.
Try with minicom.
Here's my bearerbox log (latest CVS,
AT)
2001-10-18 18:27:07 [0] DEBUG:
Started thread 4 (gw/bb_boxc.c:smsboxc_run)
2001-10-18 18:27:07 [0]
DEBUG: AT: Command: AT
2001-10-18 18:27:07 [0] DEBUG: Read from modem:
'OK'
2001-10-18 18:27:07 [0] DEBUG: AT: Command: AT&F
2001-10-18
18:27:07 [0] DEBUG: Read from modem: 'OK'
2001-10-18 18:27:07 [0] DEBUG:
AT: Command: AT
2001-10-18 18:27:08 [0] DEBUG: Read from modem:
'AT OK'
2001-10-18 18:27:08 [0] DEBUG: AT: Command:
ATE0
2001-10-18 18:27:08 [0] DEBUG: Read from modem: 'ATE0
OK'
2001-10-18 18:27:08 [0] DEBUG: AT: Command: ATI
2001-10-18
18:27:08 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4,
13.12.00 13:15 OK'
2001-10-18 18:27:09 [0] DEBUG: AT:
Command: ATI1
2001-10-18 18:27:09 [0] DEBUG: Read from modem:
'SIEMENS M20 Revision: 5.4, 13.12.00 13:15
OK'
2001-10-18 18:27:10 [0] DEBUG: AT: Command: ATI2
2001-10-18
18:27:10 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4,
13.12.00 13:15 OK'
2001-10-18 18:27:11 [0] DEBUG: AT:
Command: ATI3
2001-10-18 18:27:11 [0] DEBUG: Read from modem:
'SIEMENS M20 Revision: 5.4, 13.12.00 13:15
OK'
2001-10-18 18:27:12 [0] DEBUG: AT: Command: ATI4
2001-10-18
18:27:12 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4,
13.12.00 13:15 OK'
2001-10-18 18:27:13 [0] DEBUG: AT:
Command: AT+CPIN?
2001-10-18 18:27:14 [0] DEBUG: Read from modem: '+CPIN:
READY'
2001-10-18 18:27:14 [0] DEBUG: AT: Command:
AT+CMGF=0
2001-10-18 18:27:14 [0] DEBUG: Read from modem:
'OK'
2001-10-18 18:27:15 [0] DEBUG: AT: Command:
AT+CNMI=1,2,0,0,0
2001-10-18 18:27:15 [0] DEBUG: Read from modem:
'OK'
2001-10-18 18:27:15 [0] INFO: AT SMSC successfully
opened.
----- Original Message -----
Sent: Thursday, October 18, 2001 5:53
PM
Subject: RE: Siemens M20 and
Kannel
> Its revision 4.4
>
> -----Original
Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Alexei
>
Sent: 18 October 2001 16:41
> To: Kannel Developers
> Subject:
Re: Siemens M20 and Kannel
>
>
> really strange, we do
use M20T
> What type of firmware do you have ?
>
> -----
Original Message -----
> From: "Ronan Derby" <[EMAIL PROTECTED]>
> To:
"Kannel Developers" <[EMAIL PROTECTED]>
> Sent: Thursday, October 18, 2001 5:00 PM
>
Subject: Siemens M20 and Kannel
>
>
> > Hi,
>
>
> > I'm trying to get Kannel to use a Siemens M20.
>
> The M20 is plugged into COM1 and if I connect
> > using
minicom I can send AT commands to the M20,
> > and can send and
read SMS messages.
> >
> > In the kannel.conf file I
have:
> >
> > group = smsc
> > smsc = at
>
> modemtype = siemens
> > device = /dev/ttyS0
> > pin =
2004
> >
> > And I when I start up the bearerbox I get
this:
> > 2001-10-18 14:43:37 [0] INFO: Debug_lvl = -1, log_file =
<none>, log_lvl =
> 0
> > 2001-10-18 14:43:37 [0] INFO:
Reading configuration from
> >
</etc/kannel/smskannel.conf>
> > 2001-10-18 14:43:37 [0]
INFO: ----------------------------------------
> > 2001-10-18
14:43:37 [0] INFO: Kannel bearerbox II version 1.0.3 starting
> >
2001-10-18 14:43:37 [0] DEBUG: Started thread 1
>
(gw/bb_http.c:httpadmin_run)
> > Command: ATE0
> >
2001-10-18 14:43:37 [1] DEBUG: HTTP: Creating a new server socket
<13000>.
> > 2001-10-18 14:43:47 [0] PANIC: Cannot start with
SMSC connection failing
> >
> > Can anyone give me any
pointers as to what I might be doing wrong?
> >
> >
Regards,
> >
> > Ronan.
> >
>
>
>
|
