and 16 is for nack messages The code to ack/nack to smsc could be moved from smsc code to the router code, and we would have instant dlr-report 8/16 for every smsc :)
----- Original Message ----- From: "Andreas Fink" <[EMAIL PROTECTED]> To: "Gildas PERROT" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Monday, November 12, 2001 8:54 PM Subject: RE: DLR for emi2 : notification of delivery to phone or to SMSC ? > >Hi Andreas and thanks for your answer. > >To answer to your remark : so why there is dlrmask=1 and dlrmask=8. > > > value 1 means you get a delivery report when the SMSC has hit the phone > value 2 means you get a delivery report when the SMSC has come to the > conclusion that the SMS can not be delivered for some reason. > value 4 means you get a report when the SMS has been stored in the > SMSC because the first attemt to deliver the SMS has failed (phone is > off or out of reach for example).$ > value 8 means you get a report when kannel has sent the SMS to the > SMSC and the syntax check has passed (meaning getting an ACK back). > > >Furthermore, the ACK of UCP51 is not sufficient for me to know if the > >delivery to SMSC is done since I am using a CMG gateway (of a SMS broker) > >to access to operator SMSC. > > value 8 is not implemented for anything else than EMI2 so you want to > use values 1 + 2. > -- > > Andreas Fink > Fink-Consulting > > ------------------------------------------------------------------ > Tel: +41-61-6932730 Fax: +41-61-6932729 Mobile: +41-79-2457333 > Address: A. Fink, Schwarzwaldallee 16, 4058 Basel, Switzerland > E-Mail: [EMAIL PROTECTED] Homepage: http://www.finkconsulting.com > ------------------------------------------------------------------ > Something urgent? Try http://www.smsrelay.com/ Nickname afink > >
