+1 for me :-) Andrea ----- Original Message ----- From: "Bruno David Rodrigues" <[EMAIL PROTECTED]> To: "Stipe Tolj" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Cc: "Oded Arbel" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, March 27, 2002 4:20 PM Subject: Re: Rif: RE: speed (smsc_at2.c)
> But that's why there is a "speed" in modems.conf. That's why Siemens M20 > have a 19200, because *every* works at 19200 and not at 9600. > > But the problem is that *every*. There's equal modems at one speed and > others > at other speed (wavecom). > > That's why there is a speed in smsc group, to force a speed different from > the > speed defined in modems.conf. > > I'm commiting a patch to change this behaviour. > > If smsc->speed is defined, use it. > Else try to use modem->speed (if defined, of course). > If this one fails, try to autodetect > > Is it ok ? > > > ----- Original Message ----- > From: "Stipe Tolj" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Cc: "Oded Arbel" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Wednesday, March 27, 2002 10:18 AM > Subject: Re: Rif: RE: speed (smsc_at2.c) > > > > [EMAIL PROTECTED] wrote: > > > > > > > I think that at2 should autodetect speed if it doesn't find any speed > > > > setting, in the smsc group or modems.conf, or if the smsc speed > setting > > > > is set to 0 regardless of the modems.conf setting, or the modems.conf > > > > setting is set to 0 - isn't that the case now ? > > > > > > No. Now you must set speed=0 if you want speed to be autodetected, > otherwise it behaves as you > > > set speed = 9600. > > > That's why I think if no speed is specified than it should be > autodetect. > > > > +1 from me. If no 'speed' directive is specified in the group, > > autodetect should be used, because you don't have a garantee that a > > 9600 speeded device is attached to the port. > > > > Stipe > > > > [EMAIL PROTECTED] > > ------------------------------------------------------------------- > > Wapme Systems AG > > > > Münsterstr. 248 > > 40470 Düsseldorf > > > > Tel: +49-211-74845-0 > > Fax: +49-211-74845-299 > > > > E-Mail: [EMAIL PROTECTED] > > Internet: http://www.wapme-systems.de > > ------------------------------------------------------------------- > > wapme.net - wherever you are > > > > > >
