On Wed, 2002-04-10 at 12:49, Andreas Fink wrote: > >On Wed, 2002-04-10 at 09:16, Oded Arbel wrote: > >> Me like :-) > >> > >> what this about coding ? I thought this is how it works now ? to send > >> unicode, I send coding=3. > > > >I meant coding=0 7bits, coding=1 8bits coding=2 ucs2 to match the dcs > >specs > > I would prefer > > coding=0 or missing means autodetect > coding=1 7 bit > coding=2 8 bit > coding=3 UCS2 > > that makes the interfaces consistent with olther releases. > otherwhise lots of people have to change their applications and in > kannel-kannel interworking you end up with a version incompatibility.
Because unfortunatly the patches I've done doesn't make any sense now. "If you want a message class 0, set &mclass=1" :(((( And we need to be able to set '0' values on cgi fields, like pid=0. The interface have to be broken someday to fix this, and I was only asking when should it be. between 1.1.6 and 1.2 ? or from 1.3 to 2.0 ? Or should I have new fields and deprecate these ones ? (like flash) > > > > -- > > Andreas Fink > Fink-Consulting > > ------------------------------------------------------------------ > Tel: +41-61-6932730 Fax: +41-61-6932729 Mobile: +41-79-2457333 > Address: A. Fink, Schwarzwaldallee 16, 4058 Basel, Switzerland > E-Mail: [EMAIL PROTECTED] Homepage: http://www.finkconsulting.com > ------------------------------------------------------------------ > Something urgent? Try http://www.smsrelay.com/ Nickname afink >