Thanks Ignat, this really did "IT".
BR Arnar On Mán, 2002-07-22 at 03:33, Ignat Vassilev wrote: > Hi Arnar > Sorry about my delay getting back to you but I don't work on Saturday > and Sanday. > You don't need to touch the source at all. Ask your SMSC guys for full > config parameters. > You need to receive from them someting like this: > > FROM SMSC In your kannel.conf > IP address = host > #SMSC IP addres > IP Port = port #SMSC IP port > number > System ID = smsc-username > Password = smsc-password > System Type = system-type > Source TON = source-addr-ton #some number 0-6 > Source NPI = source-addr-npi #some number 0-6 > Destination TON = dest-addr-ton #some number 0-9 > Destination NPI = dest-addr-npi #some number 0-9 > MSISDN = global-sender > > > Here you are example for SMPP config > > group = smsc > smsc = smpp > interface-version = 33 > smsc-id = test > host = 203.13.108.18 > port = 8011 > receive-port = 8011 > smsc-username = Futurelab8 > smsc-password = testlab8 > source-addr-ton = 0 > source-addr-npi = 4 > dest-addr-ton = 1 > dest-addr-npi = 1 > priority = 1 > system-type = smpp > address-range = "" > keepalive = 0 > > group = smsbox > bearerbox-host = localhost > sendsms-port = 14013 > global-sender = "0421268000" > > If you have some questions don't histate to contact me > > > Arnar Gestsson wrote: > > >Thanks Ignat, > > > >this was true, at least in a sense, I needed to fiddle with the TON > >variable. Putting SMPP in debug mode I got > > > >2002-07-22 01:08:01 [5] DEBUG: source_addr_ton: 2 = 0x00000000 > > > >when pushing SM to the phone, but I knew that the addr_ton should be 0( > >as put by configureation). What I did to proof the problem was this I > >changed the smpp_pdu.h such that > > > >#define GSM_ADDR_TON_NATIONAL 0x00000002 > > > >was changed to > > > >#define GSM_ADDR_TON_NATIONAL 0x00000000 > > > >My question is the following, what causes the smsc_smpp to discover the > >number as national and how can I do this configuration in a right > >manner. What I was doing was telling the smpp_dpu that TON_NATIONAL was > >actually TON_UNKNOWN. > > > >Any suggestions, > > > >TIA Arnar > > > >On Fös, 2002-07-19 at 02:59, Ignat Vassilev wrote: > > > >>Hi Arnar > >> > >>0x0000000a EMSE_RINVSRCARD and means Invalid source address > >> > >>Cheerc > >>Ignat > >> > >> > >> > >>Arnar Gestsson wrote: > >> > >>>Does anybody know what > >>> > >>>"SMSC returned error code 0x0000000a in response to submit_sm" > >>> > >>>means, using kannel 1.2.0 and connecting to a SMPP SMSC v3.3 in > >>>transmitter mode. > >>> > >>>BR Arnar > >>> > >>> > >>> > >>> > >> > > > > > >