eddie wrote: >Hi, > >I have been using kannel fro a while now, but all I did is download the cvs >and update it and also come up with a GUI interface for configuration >purposes. I have a content provider who would like to connect to me and send >it to a carrier (it is beacuse the carrier is charging me lower rates - very >low - around the world). The only problem is, i have been working with a few >guys on SMPP configuration on a real SMSC and the settings of an SMPP SMSC, >the question is: > >1. Can I receive message SMPP SMSC and send it to another SMPP SMSC, act >like a route engine? > This has been discussed several times in the past on this mailing list. the short answer is "currently - no". for the reasons of why it cannot be done (well, at least until someone figures a clever way to do it ;-) - read the mailing list archive.
>2. Will my DR be the same as the one issued by the SMPP SMSC? > What do you mean by that ? when you ask for a delivery report, you will get it. >3. I can see there's a lot of setting to do in SMPP SMSC, namely , >"esm_class", "dcs", and so on. I don't see anything like that in Kannel. > Some of these settings can be configured using the configuration file (read the documentation) others can be set per message using the send-sms interface and the X-Kannel headers, while others are either hard coded or not used at all. >4. What about the DR, sm_submit_resp = submit to as octet string HEX value >and the delivery_sm = submit to as octet string Decimal. Will kannel have >that features? > > IIRC Kannel uses sm_submit_resp to request DLR. -- Oded Arbel m-Wise mobile solutions ::.. Reasons to Run Away 39-"You just cast a fireball at the villain down a 10X10 hallway and he slams a heavy stone door..."
