Hi Arbel!!! Thanks for the quick reply. I initially tried with at2, but got the following error while running bearer box
Unknown SMSC type 'at2' Failed to create Smsc wrapper Cannot start with SMSC connection failing The smsc part of the conf file looked like this group = smsc smsc = at2 modemtype = siemens-tc35 device = com1 Which is when I tried the older version, at, which succeeded so I left it that way. Am I using the older version of kannel port for win32, does anyone know where I can get the latest files for cygwin port? Best Regards Anu -----Original Message----- From: Oded Arbel [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 21, 2002 1:43 PM To: Anupama R; [EMAIL PROTECTED] Subject: RE: cygwin port of Kannel > -----Original Message----- > From: Anupama R [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, August 21, 2002 9:26 AM > To: [EMAIL PROTECTED] > Subject: cygwin port of Kannel > > > Hello, > I am trying to use the cygwin port of Kannel on an NT / 2K machine. > I have a problem in using a GSM Modem (Siemens-tc35) as the SMSC. > When I try to connect to the com port, the bearer box shuts > down saying > > 2002-08-21 06:36:08 [0] ERROR: Failed to create Smsc wrapper > 2002-08-21 06:36:08 [0] PANIC: Cannot start with SMSC > connection failing You are using the old AT module. please use AT2. > Also, although the user guide specifies that I can have a group called > modems > group = modems, > the moment I add this line into the kannel.conf, the bearer > box refuses to > start. You might want to put some content in the modems group - specificly, modem definitions. also - this is relevant only to the AT2 module, which you are not using at the time. -- Oded Arbel m-Wise mobile solutions [EMAIL PROTECTED] +972-9-9581711 (116) +972-67-340014 ::.. -- Scintillate, scintillate, asteroid minikin.