Is there no other way to send data messages ?
-----Original Message-----
From: Oded Arbel [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 24, 2002 10:40 AM
To: Avner Sternheim; [EMAIL PROTECTED]
Subject: RE: send data message with Siemens M20 ERROR 500
I've seen this problem too, and I think that this is a modem specific
problem - I have no problem sending the exact same data on another type of
modem. I have yet to find a workaround.
--
Oded Arbel
m-Wise mobile solutions
[EMAIL PROTECTED]
+972-9-9581711 (116)
+972-67-340014
::..
"The difference between fiction and reality? Fiction has to make sense."
-- Tom Clancy
> -----Original Message-----
> From: Avner Sternheim [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, September 24, 2002 11:36 AM
> To: '[EMAIL PROTECTED]'
> Subject: send data message with Siemens M20 ERROR 500
>
>
> Hi all,
>
> When I tried to send 8bit messages from the kannel via M20
> modem and set the
> conding to 8bit (coding=2)
> I got the following error, what is the problem ? and how it
> can be fixed ?
>
> 2002-09-24 11:28:48 [6] DEBUG: AT2[/dev/ttyS1]: -->
> 001100098150444640F70004A703FF00FF
> 2002-09-24 11:28:48 [6] DEBUG: AT2[/dev/ttyS1]: --> ^Z
> 2002-09-24 11:28:53 [6] DEBUG: AT2[/dev/ttyS1]: <-- >
> 2002-09-24 11:28:53 [6] DEBUG: AT2[/dev/ttyS1]: <-- +CMS ERROR: 500
> 2002-09-24 11:28:53 [6] ERROR: AT2[/dev/ttyS1]: CMS ERROR:
> +CMS ERROR: 500
> 2002-09-24 11:28:53 [6] DEBUG: AT2[/dev/ttyS1]: send command
> status: 1
> 2002-09-24 11:28:53 [1] DEBUG: Dumping 0 messages and 0 acks to store
>
>
>
