Hi Andreas,
Thank you very much. Douglas -----Original Message----- From: Andreas Fink [mailto:[EMAIL PROTECTED] Sent: quarta-feira, 16 de novembro de 2005 18:08 To: Douglas Jurcovichi Cc: devel Maling List Subject: Re: [PATCH] Documentation changes regarding coding/dcs (was: Message Mode) On 10.11.2005, at 15:17, Douglas Jurcovichi wrote: > Hi Dziugas, > > > Sorry I got a mistake when I did the send;-) > > > The problem is I have a machine running kannel 1.2.1 that I send > normal GSM messages using coding=1. In a new machine I put kannel > 1.3.2 and when I send the message with coding=1 it goes binary. > > In the manual coding = 0 is equals coding = 1 > > message coding: 0 (default, 7 bits), 1 (7 bits), 2 (8 bits) or 3 > (Unicode) > this behaviour has changed since 1.2.1 to 1.3 (or maybe 1.4) and is somewhere documented I think. The general rule is that the coding parameters now follow what the GSM specs say about the parameters inside a SMS PDU. The old way was saying 0 = default, 1 = first value, 2 = second value etc. The new way is saying -1= default/not present. 0 = first value according to spec, 1, second value etc. So you have to change your submit code to adopt to the new way of parameters. This is true for coding and a few other parameters. The new parameters are more logical. Andreas Fink Fink Consulting GmbH --------------------------------------------------------------- Tel: +41-61-6666332 Fax: +41-61-6666331 Mobile: +41-79-2457333 Address: Clarastrasse 3, 4058 Basel, Switzerland E-Mail: [EMAIL PROTECTED] Homepage: http://www.finkconsulting.com --------------------------------------------------------------- ICQ: 101946485 MSN: [EMAIL PROTECTED] AIM: smsrelay Skype: andreasfink Yahoo: finkconsulting SMS: +41792457333 PGP9: 0714 DF2B A189 A760 6201 5CBD D040 3E71 4DAF 68BB
