Dear List if i use lynx "http://127.0.0.1:13013/cgi-bin/sendsms?user=...... to send sms there is no wireshark capture for what i sent, how to capture this action (capture filter in wireshark) coz i can see the kannel.log (see my email before) ...
Thx Benjamin On Fri, Oct 9, 2009 at 6:25 AM, Benjamin Heryanto < benjamin.herya...@gmail.com> wrote: > Dear Nikos > > I attach the wire output > > Regards > Benjamin > > 2009/10/9 Nikos Balkanas <n...@amdtelecom.net> > > Hi, >> >> Could you please attach relevant wireshark output? >> >> BR, >> Nikos >> >> ----- Original Message ----- >> *From:* Benjamin Heryanto <benjamin.herya...@gmail.com> >> *To:* devel@kannel.org >> *Sent:* Friday, October 09, 2009 1:23 AM >> *Subject:* Confuse smpp with tlv >> >> Dear list >> >> After configure smpp with tlv (using cvs version "Kannel/cvs-20090520") >> >> >> This is my configuration >> >> group = smsc >> smsc = smpp >> host = xxx.xxx.xxx.xxx >> port = 10293 >> smsc-username = a >> smsc-password = b >> system-type = tcp >> smsc-id = new >> allowed-smsc-id = new >> transceiver-mode = yes >> source-addr-ton = 0 >> source-addr-npi = 1 >> source-addr-autodetect = no >> address-range = "" >> dest-addr-ton = 0 >> dest-addr-npi = 1 >> msg-id-type = 0x01 >> throughput = 1 >> >> /etc/kannel/smpp-tlv.conf >> group = smpp-tlv >> name = short_name >> tag = 0x5120 >> type = octetstring >> length = 8 >> >> group = smpp-tlv >> name = txid >> tag = 0x5121 >> type = integer >> length = 20 >> >> group = smpp-tlv >> name = conttype >> tag = 0x5123 >> type = octetstring >> length = 20 >> >> >> lynx " >> http://127.0.0.1:13013/cgi-bin/sendsms?user=new&smsc=new&pass=new&to=234355058673&from=123404&text=testing+push&meta-data=%3Fsmpp%3Fshort_name%3Dcr9trial >> " >> >> In /var/log/kannel/access.log >> 2009-10-08 11:14:56 FAILED Send SMS [SMSC:new] [SVC:abc] [ACT:] [BINF:] >> [FID:] [META:?smpp?short_name=cr9trial] [from:123404] [to:234355058673] >> [flags:-1:0:-1:-1:-1] [msg:12:testing push] [udh:0:] >> >> In /var/log/kannel/kannel.log >> 2009-10-08 11:14:55 [10888] [32] DEBUG: boxc_receiver: sms received >> 2009-10-08 11:14:55 [10888] [32] DEBUG: send_msg: sending msg to box: >> <127.0.0.1> >> 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP[new]: Manually forced source >> addr ton = 0, source add npi = 1 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP[new]: Manually forced dest >> addr ton = 0, dest add npi = 1 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: new group created `smpp' >> 2009-10-08 11:14:55 [10888] [9] DEBUG: group=`smpp' key=`short_name' >> value=`cr9trial' >> 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP[new]: Sending PDU: >> 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP PDU 0xc7c0ef0 dump: >> 2009-10-08 11:14:55 [10888] [9] DEBUG: type_name: submit_sm >> 2009-10-08 11:14:55 [10888] [9] DEBUG: command_id: 4 = 0x00000004 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: command_status: 0 = 0x00000000 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: sequence_number: 25577 = >> 0x000063e9 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: service_type: NULL >> 2009-10-08 11:14:55 [10888] [9] DEBUG: source_addr_ton: 0 = 0x00000000 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: source_addr_npi: 1 = 0x00000001 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: source_addr: "123404" >> 2009-10-08 11:14:55 [10888] [9] DEBUG: dest_addr_ton: 0 = 0x00000000 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: dest_addr_npi: 1 = 0x00000001 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: destination_addr: "234355058673" >> 2009-10-08 11:14:55 [10888] [9] DEBUG: esm_class: 3 = 0x00000003 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: protocol_id: 0 = 0x00000000 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: priority_flag: 0 = 0x00000000 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: schedule_delivery_time: NULL >> 2009-10-08 11:14:55 [10888] [9] DEBUG: validity_period: NULL >> 2009-10-08 11:14:55 [10888] [9] DEBUG: registered_delivery: 0 = >> 0x00000000 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: replace_if_present_flag: 0 = >> 0x00000000 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: data_coding: 0 = 0x00000000 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: sm_default_msg_id: 0 = 0x00000000 >> 2009-10-08 11:14:55 [10888] [9] DEBUG: sm_length: 15 = 0x0000000f >> 2009-10-08 11:14:55 [10888] [9] DEBUG: short_message: "testing push" >> 2009-10-08 11:14:55 [10888] [9] DEBUG: short_name: "cr9trial" >> 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP PDU dump ends. >> 2009-10-08 11:14:56 [10888] [9] DEBUG: SMPP[new]: Got PDU: >> 2009-10-08 11:14:56 [10888] [9] DEBUG: SMPP PDU 0xc7a0fb8 dump: >> 2009-10-08 11:14:56 [10888] [9] DEBUG: type_name: submit_sm_resp >> 2009-10-08 11:14:56 [10888] [9] DEBUG: command_id: 2147483652 = >> 0x80000004 >> 2009-10-08 11:14:56 [10888] [9] DEBUG: command_status: 1031 = 0x00000407 >> 2009-10-08 11:14:56 [10888] [9] DEBUG: sequence_number: 25577 = >> 0x000063e9 >> 2009-10-08 11:14:56 [10888] [9] DEBUG: message_id: NULL >> 2009-10-08 11:14:56 [10888] [9] DEBUG: SMPP PDU dump ends. >> 2009-10-08 11:14:56 [10888] [9] ERROR: SMPP[new]: SMSC returned error code >> 0x00000407 (Vendor-specific error, please refer to your SMPP provider) in >> response to submit_sm. >> [I edit some data] >> >> The situation is my telco doing migration system with optional parameter. >> and they need wireshark data from us >> From that there is submit_sm (kannel log above), but i can't see submit_sm >> in wireshark, why this could happen. i have another connection to other >> port for the same ip and that connection not using any meta data and it work >> give submit_sm in wireshark. >> >> Regards >> Benjamin >> >> >
