Am 13.11.2014 14:48, schrieb Anton Osennikov:
13.11.2014 17:50, Stipe Tolj пишет:
Am 12.11.2014 18:42, schrieb Anton Osennikov:
Hello.
Here was another try to solve the same problem, for ALLVoIP
AV3402 device. The device looks the same: same additional command, same
additional response.
http://www.mail-archive.com/devel@kannel.org/msg11934.html
Hi Anton,
thanks a lot for the input here.
Just to get you right, adding your patch to support \r escape codes
would solve both plaform requirements in terms of adding more input on
the AT command interface?
It does so for ALLVoIP AV3402 device. We successfully use this patch
with this device for several months now.
I hope the patch will also work for Portech MV-37x devices, since
additional prompts and responses are very similar.
Here's log with "module1" command embedded into smsc-password:
smsc-password = "23*****74\r\nmodule1"
2014-11-13 18:37:17 [9295] [7] INFO: AT2[mts]: opening device
2014-11-13 18:37:17 [9295] [7] DEBUG: Connecting to <93.191.111.114>
2014-11-13 18:37:17 [9295] [7] DEBUG: AT2[mts]: device opened. Telnet
mode = 0
2014-11-13 18:37:17 [9295] [7] INFO: AT2[mts]: Logging in
2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <--
2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- >
2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: --> voip^M
2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- sername: voip>
2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: --> 23*****74
module1^M
2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- password: **********
2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- user level = admin.
2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- command: logout,
module1, module2, state1, state2, info.
2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- ]
2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- module1
2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- getting module 1 ...
2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- got!! press 'ctrl-x'
to release module 1.
2014-11-13 18:37:22 [9295] [7] DEBUG: AT2[mts]: --> AT^M
2014-11-13 18:37:23 [9295] [7] DEBUG: AT2[mts]: <-- 0
thanks Anton.
Ariel, does this work for the Portech platform too?
Stipe
--
-------------------------------------------------------------------
Kölner Landstrasse 419
40589 Düsseldorf, NRW, Germany
tolj.org system architecture Kannel Software Foundation (KSF)
http://www.tolj.org/ http://www.kannel.org/
mailto:st_{at}_tolj.org mailto:stolj_{at}_kannel.org
-------------------------------------------------------------------
