And that connector has changed between builds,to complicate things
further.
- Jim
On Sat, 2007-03-24 at 21:59 -1000, Mitch Bradley wrote:
> I don't have a listing of part numbers for all of the parts. It's
> possible that some of the parts are only available in China. We often
> have to ask Quanta to send us parts.
>
> The shortest path to getting the answer would be to just cut the
> positive lead from the wall wart. Not as pretty as making a connector,
> but it's hard to justify spending a lot of time to keep an inexpensive
> wall wart pristine.
>
> Hal Murray wrote:
> > Are the schematics and parts list available? If so, where?
> >
> > I want to build a gizmo to go between the wall wart and the XO so I can
> > easily measure the current going in. I don't have anything in my junkbox
> > that fits those connectors and I haven't found a reasonable way to measure
> > it.
> >
> > I think the pin is 1.3 mm dia, but that's only a good guess. (1.7 is too
> > big, 1.1 is too small. Digikey carries 1.3 mm parts.) Can anybody confirm
> > the size of that pin?
> >
> >
> >
> _______________________________________________
> Devel mailing list
> [email protected]
> http://mailman.laptop.org/mailman/listinfo/devel
--
Jim Gettys
One Laptop Per Child
_______________________________________________
Devel mailing list
[email protected]
http://mailman.laptop.org/mailman/listinfo/devel
