Experienced the same connection difficulties with 354/83.
Scripting the connexion worked.
jp
On 29-Mar-07, at 8:41 PM, Jim Gettys wrote:
Infrastructure mode should "just work" using the UI, no need for the
script.
- Jim
On Thu, 2007-03-29 at 17:36 -0700, Guido van Rossum wrote:
I did this (new firmware and new boot image). No problems so far
exept
I can't seem to access the network; e.g. the web app always gives
me a
Page Load Error when I enter a URL. Do I have to follow the mesh
instructions for that or were those only for attempting to use the
mesh (which makes no sense since there aren't any other XO users
nearby in my building).
(I found a newer boot image, 354, but after downloading the md5 sum
was incorrect, so I stuck to 353.)
--Guido
On 3/28/07, Jim Gettys <[EMAIL PROTECTED]> wrote:
Build 353 is getting very close to our goals for the trial.
Remaining
are:
o fixing a bug that is causing Sugar to crash on boot;
rebooting the
machine will generally fix it. As of a few minutes ago, Trent Lloyd
understands the fault and I expect it will be resolved tomorrow.
o providing a UI for telling the system to join the mesh.
and possibly a few other things.
So the adventurous of you should install the Q2B83 firmware and
Build
353; it would help to get some feedback if anyone runs into serious
problems. If you have to ask us how to find and install this
firmware
and build, you're probably not the right person to try these.
If you want to play with the mesh before the build with the
working UI
for selecting the mesh, I attach some scripts.
- Jim
--
Jim Gettys
One Laptop Per Child
---------- Forwarded message ----------
From: Michail Bletsas <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Date: Wed, 28 Mar 2007 14:16:42 -0400 (EDT)
Subject: how to get internet access via our mesh testbed
In order to try internet access via our mesh testbed you need to
do two
things:
1. configure and start your msh0 interface.
The attached msh0-conf script will do that and assign a network 10.
address to it based on the last 3 bytes of its MAC address
2. check for a mesh portal (internet gateway). To do that run the
attached
mppreq_client.py script. No news is good news when you run that
script.
If a mesh portal gets discovered, its IP address will be added to
the
routing table as the default route.
M.
_______________________________________________
Devel mailing list
[email protected]
http://mailman.laptop.org/mailman/listinfo/devel
--
Jim Gettys
One Laptop Per Child
_______________________________________________
Devel mailing list
[email protected]
http://mailman.laptop.org/mailman/listinfo/devel
_______________________________________________
Devel mailing list
[email protected]
http://mailman.laptop.org/mailman/listinfo/devel
