Use comedi_request_region() to request the I/O region used by this driver. Remove the noise when the board is first attached as well as the error message when the request_region() fails, comedi_request_reqion() will output the error message if necessary.
Also, remove the unnecessary 'dev->irq = 0'. This driver does not use interrupts and the comedi core has already cleared this variable. Signed-off-by: H Hartley Sweeten <[email protected]> Cc: Ian Abbott <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> --- drivers/staging/comedi/drivers/pcl730.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c index 371f76c..50cc3ac 100644 --- a/drivers/staging/comedi/drivers/pcl730.c +++ b/drivers/staging/comedi/drivers/pcl730.c @@ -64,20 +64,11 @@ static int pcl730_attach(struct comedi_device *dev, struct comedi_devconfig *it) { const struct pcl730_board *board = comedi_board(dev); struct comedi_subdevice *s; - unsigned long iobase; - unsigned int iorange; int ret; - iobase = it->options[0]; - iorange = board->io_range; - printk(KERN_INFO "comedi%d: pcl730: board=%s 0x%04lx ", dev->minor, - board->name, iobase); - if (!request_region(iobase, iorange, dev->board_name)) { - printk("I/O port conflict\n"); - return -EIO; - } - dev->iobase = iobase; - dev->irq = 0; + ret = comedi_request_region(dev, it->options[0], board->io_range); + if (ret) + return ret; ret = comedi_alloc_subdevices(dev, 4); if (ret) -- 1.8.1.4 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
