Use comedi_request_region() to request the I/O region used by this driver. Remove the noise when the board is first attached as well as the error message when the request_region() fails, comedi_request_reqion() will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <[email protected]> Cc: Ian Abbott <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> --- drivers/staging/comedi/drivers/multiq3.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/drivers/staging/comedi/drivers/multiq3.c b/drivers/staging/comedi/drivers/multiq3.c index 4750206..b6bc2da 100644 --- a/drivers/staging/comedi/drivers/multiq3.c +++ b/drivers/staging/comedi/drivers/multiq3.c @@ -226,22 +226,16 @@ static int multiq3_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct multiq3_private *devpriv; - int result = 0; - unsigned long iobase; struct comedi_subdevice *s; + int ret; - iobase = it->options[0]; - printk(KERN_INFO "comedi%d: multiq3: 0x%04lx ", dev->minor, iobase); - if (!request_region(iobase, MULTIQ3_SIZE, "multiq3")) { - printk(KERN_ERR "comedi%d: I/O port conflict\n", dev->minor); - return -EIO; - } - - dev->iobase = iobase; + ret = comedi_request_region(dev, it->options[0], MULTIQ3_SIZE); + if (ret) + return ret; - result = comedi_alloc_subdevices(dev, 5); - if (result) - return result; + ret = comedi_alloc_subdevices(dev, 5); + if (ret) + return ret; devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL); if (!devpriv) -- 1.8.1.4 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
