So I tried again with a clean directory after removing libgit2 from homebrew,
but it appears geany-osx is intended to build with 10.13 and I’m using 10.12.6.
I’m still getting stuck on libgit2 somehow.
Here is what I’m seeing:
~/projects/geany/geany-osx master$ jhbuild -m geany.modules build geany-bundle
…
/Users/sblatnick/gtk/source/libgit2-0.24.3/src/unix/posix.h:77:9: warning:
'futimens' is only available on macOS 10.13 or newer
[-Wunguarded-availability-new]
return futimens(f, s);
^~~~~~~~
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.13.sdk/usr/include/sys/stat.h:373:5:
note: 'futimens' has been explicitly marked partial here
int futimens(int __fd, const struct timespec __times[2])
__API_AVAILABLE(macosx(10.13), ios(11.0), tvos(11.0), watchos(4.0));
^
/Users/sblatnick/gtk/source/libgit2-0.24.3/src/unix/posix.h:77:9: note: enclose
'futimens' in a __builtin_available check to silence this warning
return futimens(f, s);
^~~~~~~~
1 warning generated.
[100%] Linking C executable libgit2_clar
[100%] Built target libgit2_clar
make: *** [all] Error 2
*** Error during phase build of libgit2: ########## Error running make -j 9
*** [14/26]
[1] Rerun phase build
[2] Ignore error and continue to install
[3] Give up on module
[4] Start shell
[5] Reload configuration
[6] Go to phase "wipe directory and start over"
choice: ^CInterrupted
These are my homebrew and macport packages currently installed:
~/projects/geany/geany-osx master$ brew list
adns gdbm gobject-introspection jq libssh2
nettle pango readline
atk gdk-pixbuf graphite2 libassuan libtasn1
nmap pcre ruby-build
autoconf gettext harfbuzz libffi
libtiff npth pinentry shared-mime-info
cairo glib hicolor-icon-theme libgcrypt
libunistring oniguruma pixman sqlite
colordiff gmp icu4c libgpg-error libusb
openssl pkg-config the_silver_searcher
fontconfig gnupg intltool libksba libxml2
openssl@1.1 python wget
freetype gnutls jpeg libpng
mariadb p11-kit rbenv xz
~/projects/geany/geany-osx master$ port installed
Warning: port definitions are more than two weeks old, consider updating them
by running 'port selfupdate'.
The following ports are currently installed:
at-spi2-atk @2.26.0_0 (active)
at-spi2-core @2.26.0_0 (active)
atk @2.26.0_0 (active)
autoconf @2.69_5 (active)
autoconf-archive @2017.03.21_0 (active)
automake @1.15.1_0 (active)
bzip2 @1.0.6_0 (active)
cairo @1.14.10_0+quartz+x11 (active)
db48 @4.8.30_4 (active)
dbus @1.10.20_0 (active)
expat @2.2.4_0 (active)
fontconfig @2.12.5_0 (active)
freetype @2.8_0 (active)
gawk @4.1.4_3 (active)
gdbm @1.13_3 (active)
gdk-pixbuf2 @2.36.10_1+x11 (active)
gettext @0.19.8.1_0 (active)
glib2 @2.54.0_0+x11 (active)
gnome-common @3.18.0_0 (active)
gobject-introspection @1.54.0_0 (active)
graphite2 @1.3.9_0 (active)
harfbuzz @1.5.1_0 (active)
hicolor-icon-theme @0.17_0 (active)
intltool @0.51.0_3 (active)
itstool @2.0.2_2 (active)
jasper @2.0.14_0 (active)
jpeg @9b_0 (active)
libedit @20170329-3.1_1 (active)
libepoxy @1.4.3_1+python36 (active)
libffi @3.2.1_0 (active)
libiconv @1.15_0 (active)
libidn @1.33_0 (active)
libpixman @0.34.0_0 (active)
libpng @1.6.32_0 (active)
libtool @2.4.6_3 (active)
libxml2 @2.9.5_0 (active)
libxslt @1.1.29_1 (active)
mesa @17.1.6_0+osmesa+python27 (active)
ncurses @6.0-20170916_0 (active)
openssl @1.0.2l_0 (active)
p5.24-encode-locale @1.50.0_0 (active)
p5.24-file-listing @6.40.0_1 (active)
p5.24-getopt-long @2.500.0_0 (active)
p5.24-html-form @6.30.0_1 (active)
p5.24-html-parser @3.720.0_0 (active)
p5.24-html-tagset @3.200.0_4 (active)
p5.24-http-cookies @6.40.0_0 (active)
p5.24-http-daemon @6.10.0_1 (active)
p5.24-http-date @6.20.0_1 (active)
p5.24-http-message @6.130.0_0 (active)
p5.24-http-negotiate @6.10.0_1 (active)
p5.24-io-html @1.1.0_0 (active)
p5.24-io-socket-ssl @2.51.0_0 (active)
p5.24-libwww-perl @6.260.0_0 (active)
p5.24-lwp-mediatypes @6.20.0_1 (active)
p5.24-lwp-protocol-https @6.70.0_0 (active)
p5.24-mozilla-ca @20160104_0 (active)
p5.24-net-http @6.170.0_0 (active)
p5.24-net-libidn @0.120.0_4 (active)
p5.24-net-ssleay @1.810.0_0 (active)
p5.24-pathtools @3.620.0_0 (active)
p5.24-scalar-list-utils @1.490.0_0 (active)
p5.24-sub-name @0.210.0_0 (active)
p5.24-sub-uplevel @0.280.0_0 (active)
p5.24-test-exception @0.430.0_0 (active)
p5.24-test-nowarnings @1.40.0_1 (active)
p5.24-test-warn @0.320.0_0 (active)
p5.24-try-tiny @0.280.0_0 (active)
p5.24-uri @1.720.0_0 (active)
p5.24-www-robotrules @6.20.0_1 (active)
p5.24-xml-parser @2.440.0_0 (active)
pango @1.40.12_0+quartz+x11 (active)
pcre @8.41_0 (active)
perl5.24 @5.24.2_0 (active)
pkgconfig @0.29.2_0 (active)
py-libxml2 @2.9.5_0 (active)
py27-beaker @1.8.1_0 (active)
py27-libxml2 @2.9.5_0 (active)
py27-mako @1.0.7_0 (active)
py27-markupsafe @0.23_0 (active)
py27-setuptools @36.5.0_0 (active)
python2_select @0.0_2 (active)
python27 @2.7.13_1 (active)
python_select @0.3_7 (active)
readline @7.0.003_1 (active)
shared-mime-info @1.7_2 (active)
sqlite3 @3.20.1_0 (active)
tiff @4.0.8_0 (active)
Xft2 @2.3.2_0 (active)
xorg-compositeproto @0.4.2_0 (active)
xorg-damageproto @1.2.1_0 (active)
xorg-dri2proto @2.8_0 (active)
xorg-fixesproto @5.0_0 (active)
xorg-glproto @1.4.17_0 (active)
xorg-inputproto @2.3.2_0 (active)
xorg-kbproto @1.0.7_0 (active)
xorg-libice @1.0.9_0 (active)
xorg-libpthread-stubs @0.3_0 (active)
xorg-libsm @1.2.2_0 (active)
xorg-libX11 @1.6.5_0 (active)
xorg-libXau @1.0.8_0 (active)
xorg-libxcb @1.12_2+python27 (active)
xorg-libXcomposite @0.4.4_0 (active)
xorg-libXcursor @1.1.14_0 (active)
xorg-libXdamage @1.1.4_0 (active)
xorg-libXdmcp @1.1.2_0 (active)
xorg-libXext @1.3.3_0 (active)
xorg-libXfixes @5.0.3_0 (active)
xorg-libXi @1.7.8_0 (active)
xorg-libXinerama @1.1.3_0 (active)
xorg-libXmu @1.1.2_0 (active)
xorg-libXrandr @1.5.1_0 (active)
xorg-libXt @1.1.5_1 (active)
xorg-libXtst @1.2.3_0 (active)
xorg-libXxf86vm @1.1.4_0 (active)
xorg-randrproto @1.5.0_0 (active)
xorg-recordproto @1.14.2_0 (active)
xorg-renderproto @0.11.1_0 (active)
xorg-xcb-proto @1.12_1+python27 (active)
xorg-xcb-util @0.4.0_0 (active)
xorg-xextproto @7.3.0_0 (active)
xorg-xf86vidmodeproto @2.3.1_0 (active)
xorg-xineramaproto @1.2.1_0 (active)
xorg-xproto @7.0.31_0 (active)
xrender @0.9.10_0 (active)
xz @5.2.3_0 (active)
zlib @1.2.11_0 (active)
Sorry for the inconvenience, but any suggestions?
Thanks,
Steve
From: Jiří Techet [mailto:tec...@gmail.com]
Sent: Sunday, October 1, 2017 3:35 AM
To: Steven Blatnick <steve8tr...@yahoo.com>
Cc: Geany development list <devel@lists.geany.org>
Subject: Re: [Geany-Devel] OSX plugin development
Hi Steve,
yeah, I meant a different login.
Oh, you use MacPorts too. I had some problems with MacPorts and jhuild in the
past so that definitely could be it as well.
Jiri
On Sun, Oct 1, 2017 at 6:56 AM, Steven Blatnick <steve8tr...@yahoo.com
<mailto:steve8tr...@yahoo.com> > wrote:
Thanks again for the quick reply.
When you say to use a separate account, do you mean a different login to osx?
I'm not sure I can do that since this is a laptop I was issued from work that I
wish to use geany plugins on. I think my best bet is to uninstall any homebrew
(and macport?) gtk libraries and try again.
Sorry I made you repeat your initial advice. I should have mentioned I didn't
think I could try another account. If removing homebrew and deleting the gtk
directory don't fix it, I suppose using jhbuild python is my next best option
from your original email.
Thanks,
Steve
-------- Original Message --------
From:Jiří Techet
Sent:Sat, 30 Sep 2017 13:15:16 -0600
To:Geany development list
Subject:Re: [Geany-Devel] OSX plugin development
Hi Steve,
I found this issue
https://gitlab.kitware.com/cmake/cmake/issues/17101
not sure if it's related.
In your case I suspect either some clash with Homebrew (in this case I
recommend building in a separate account) or that you built part of the
dependencies on previous macOS system and then upgraded to High Sierra where
symbols in system libraries may differ. In this case I'd suggest deleting the
whole gtk directory and starting over to make sure everything is built on the
new system.
Jiri
On Sat, Sep 30, 2017 at 1:09 AM, <steve8tr...@yahoo.com
<mailto:steve8tr...@yahoo.com> > wrote:
Ok, so I got through the dependencies (meta-gtk-osx-core), and ran:
export LC_ALL=en_US.UTF-8
export LANG=en_US.UTF-8
jhbuild -m geany.modules build geany-bundle
…
*** Building libgit2 *** [14/26]
make -j 9
[ 0%] Linking C shared library libgit2.dylib
[ 79%] Built target libgit2_clar
dyld: lazy symbol binding failed: Symbol not found: _utimensat
Referenced from: /Users/sblatnick/gtk/inst/bin/cmake
Expected in: /usr/lib/libSystem.B.dylib
dyld: Symbol not found: _utimensat
Referenced from: /Users/sblatnick/gtk/inst/bin/cmake
Expected in: /usr/lib/libSystem.B.dylib
make[2]: *** [libgit2.dylib] Abort trap: 6
make[2]: *** Deleting file `libgit2.dylib'
make[1]: *** [CMakeFiles/git2.dir/all] Error 2
make: *** [all] Error 2
*** Error during phase build of libgit2: ########## Error running make -j 9
*** [14/26]
[1] Rerun phase build
[2] Ignore error and continue to install
[3] Give up on module
[4] Start shell
[5] Reload configuration
[6] Go to phase "wipe directory and start over"
I’m not sure what is going wrong with building geany itself.
Thanks,
Steve
From: Devel [mailto:devel-boun...@lists.geany.org
<mailto:devel-boun...@lists.geany.org> ] On Behalf Of Jirí Techet
Sent: Friday, September 22, 2017 3:02 AM
To: Geany development list <devel@lists.geany.org
<mailto:devel@lists.geany.org> >
Subject: Re: [Geany-Devel] OSX plugin development
Hi Steve,
I slightly remember I got an error like this one in the past but I don't
remember what exactly the problem was. Anyway, it's not good to mix
dependencies from homebrew and jhbuild. If you have some environment variables
set up to link against homebrew libraries, this is what could cause problems. I
created a separate account on my machine from which I do the Geany build to be
sure nothing like that is set up.
If you keep getting the error, you might also consider building python as part
of the build process which is then used instead of the system python for the
rest of the build. This means running
jhbuild bootstrap
jhbuild python
jhbuild build meta-gtk-osx-bootstrap
jhbuild build meta-gtk-osx-core
When doing a change like that, it's best to remove the gtk directory because it
changes dependencies and basically everything has to be rebuilt.
Apart from that everything else should work as described here:
https://github.com/geany/geany-osx
When al the dependencies are built, you should be able to use the same stuff
you use under linux for building your plugin. But be sure to run the build
within a jhbuild shell - you need to run
jhbuild shell
which sets up the environment variables to use the dependencies built by
jhbuild after you should be able to build your plugin in a normal way.
Let me know if you run into more problems.
Cheers,
Jiri
On Fri, Sep 22, 2017 at 12:00 AM, <steve8tr...@yahoo.com
<mailto:steve8tr...@yahoo.com> > wrote:
I’m trying to build plugins in OSX, and I’m a bit out of my element.
(I’ve had problems with my yahoo email not getting through to this list, but I
haven’t had a chance to switch email accounts. I hope this makes it.)
I’m following the guide on https://github.com/geany/geany-osx
I get stuck running in step 6:
jhbuild build meta-gtk-osx-bootstrap
…
checking for python module libxml2... ./configure: line 2422: 83400 Done
echo "import $py_module"
83401 Abort trap: 6 | python - >&/dev/null
not found
configure: error: Python module libxml2 is needed to run this package
*** Error during phase configure of itstool: ########## Error running
../configure --prefix /Users/steve/gtk/inst *** [7/12]
[1] Rerun phase configure
[2] Ignore error and continue to build
[3] Give up on module
[4] Start shell
[5] Reload configuration
[6] Go to phase "wipe directory and start over"
[7] Go to phase "clean"
[8] Go to phase "distclean"
I’ve installed libxml2 via homebrew, and py-libxml2 and py27-libxml2 via
macports to no avail.
I figured out how to build the .o file for one of my plugins:
gcc -c quick-search.c -fPIC -std=c99 -DGTK -I
/Users/steve/projects/geany/geany/plugins/ -I
/Users/steve/projects/geany/geany/src/ -I
/Users/steve/projects/geany/geany/tagmanager/src/ -I
/Users/steve/projects/geany/geany/scintilla/include/ `pkg-config --cflags
glib-2.0` `pkg-config --cflags gtk+-2.0` -I
/Users/steve/projects/geany/geany/scintilla/
But not the ...so file.
Thanks for any help,
Steve
_______________________________________________
Devel mailing list
Devel@lists.geany.org <mailto:Devel@lists.geany.org>
https://lists.geany.org/cgi-bin/mailman/listinfo/devel
_______________________________________________
Devel mailing list
Devel@lists.geany.org <mailto:Devel@lists.geany.org>
https://lists.geany.org/cgi-bin/mailman/listinfo/devel
_______________________________________________
Devel mailing list
Devel@lists.geany.org
https://lists.geany.org/cgi-bin/mailman/listinfo/devel
