Zarro Boogs per Child wrote: > #7788: Touchpad behavior deteriorates under joyride-2212, joyride-2230 > --------------------------+------------------------------------------------- > Reporter: tvoverbeek | Owner: dilinger > Type: defect | Status: new > Priority: blocker | Milestone: 8.2.0 (was Update.2) > Component: kernel | Version: olpc-3 > Resolution: | Keywords: 8.2.0:? blocks?:8.2.0 > Next_action: diagnose | Verified: 0 > Blockedby: | Blocking: > --------------------------+------------------------------------------------- > > Comment(by dilinger): > > Thanks for the logs! > > The lack of recalibration messages in 708 does not mean that the cursor > isn't messed up. When you boot and use 708, is the mouse cursor jumpy at > all? > > No, under 708 I get no noticeable cursor jumps. > There is a lot of strangeness in your 2298 logs. The fact that 3/5 times, > the driver detects miscalibration at around the same time (160s after > boot) makes me wonder what's happening there. What point in the boot > sequence are you at when it happens? Is sugar completely up? Are you > launching any activities, or doing anything else other than moving the > cursor around? > > When booting I wait till the home view is complete (circle view with activities) without touching the touchpad. Then I start a terminal session and start Memorize. Memorize requires a lot of mouse movement. Play a while in Memorize until the cursor starts jumping. Then switch to Bounce and play a while. At 160 sec I am in Memorize. > The eth0/msh0 messages makes me think that NetworkManager has just come > up, so the hardware was miscalibrated right from the start. I wonder if > the large amount of EC commands happening during boot are screwing > something up.. I'm also wondering wtf the PCI EHCI messages are about. > > The EHCI messages only started to show up with the most recent kernels. I cannot give you a specific date/version. Sorry. Also I am in a quite noisy WiFi environment at home. There are more than 15 WiFi networks in the neighborhood view. My home accesspoint has WPA-PSK. Sometimes the XO prompts me for the accesspoint password. I cancel the dialog and then go to the neighborhood view, select my network, click Connect again and it associates without prompting for the password again. Might have nothing to do with this. > Do you keep your finger on the touchpad during bootup? Also, when you see > the miscalibration errors in the logs (and you remove your fingers from > the touchpad for a few seconds), does the touchpad driver fix itself, or > is the cursor still jumpy afterwards? > > As written above, no finger on the touchpad during boot. After recalibration it fixes itself for a short while, but then starts jumping again (as you can see in the logs).
Saw Richard Smiths message about the new firmware with faster/better EC handling. My XO firmware is on Q2E12. Could the interaction between recent firmwares (Q2E12) and 2.6.25 kernel scheduling have something to do with this? Should I try again when Q2E13 shows up in joyride? _______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel
