Hello On Sun, May 17, 2009 at 20:54, Bobby Powers <bobbypow...@gmail.com> wrote: > on a B4 (which just needed the VGA connector, no other components),
Same here. I have a spare B4 board for these tests (I would like to reproduce the identical picture of the XO on a projector for a formation - and I'm talking about openfirmare and all) > I was able to > drive full screen video on a large LCD from the XO, so its not > useless That's just what I want to do. No internal LCD mirroring - plain VGA output only So far I've been stopped by : - the video routing question (CN18) - the plug. I would like to avoid soldering wires to a VGA plug. Soldering the plug should take less than 5 minutes once I get the correct type from digikey/mouser > If you are still interested, you could start with the following > references (although I didn't see any part numbers there). Already know them :-/ -- Dr. Guylhem Aznar, MD PhD Unité d'Analyse Médico-Économique Service de Santé Publique et d'Économie de la Santé Pôle SPSSR CHU de Fort de France BP 632 97261 Fort De France Cedex Martinique, France Tel : 05 96 55 23 47 Fax : 05 96 75 84 57 _______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel