Hi, Thanks for the logs, but they seem to be a bit messed up, e.g.
On Sun, Sep 18, 2011 at 2:21 AM, <fors...@ozonline.com.au> wrote: > Bad block at 0x1e140000 = page 0x3c280 = eblock 0xf0a > cons > Bad block at 0x1e340000 = page 0x3c680 = eblock 0xf1a > Loading ramdisk image from /pci/nandflash@c:\ > Bad block at 0x1e540000 = page 0x3ca80 = eblock 0xf2a > [ 0.000000] Linux ve > Bad block at 0x1e740000 = page > Bad block at 0x22340000 = page 0x44680 = eblock 0x111a00000000e814000 > Bad block at 0x22540000 = page 0x44a80 = eblock 0x112a0e814600 - 0ec00000 > Bad block at 0x22740000 = page 0x44e80 = eblock 0x113a - 00bc4a00 > Bad block at 0x22940000 = page 0x45280 = eblock 0x114a00e814600 - > 000000000ebfffff to 007d9000 > Bad block at 0x22b40000 = page 0x45680 = eblock 0x115a > - 00bc49ff > [ 0.000000] 232M > Bad block at 0x22d40000 = page 0x45a80 = eblock 0x116a > [ 0.000000] mapped low ram: 0 - 0e814000 > Bad block at 0x22f40000 = page 0x45e80 = eblock 0x117a low ram: 0 - 0e814000 > Bad block at 0x23140000 = page 0x46280 = eblock 0x118a14000 > Bad block at 0x23340000 = page 0x46680 = eblock 0x119a > > Bad block at 0x26140000 = page 0x4c280 = eblock 0x130a100000] BIOS > reserved ==> [000009fc00 - This looks like a copy/paste issue from a buffer. Could you instead configure your serial console software to log to a file, and then just send the file? With minicom this is Ctrl+A then L, or with screen this is: screen -L /dev/ttyUSB0 115200 Thanks, Daniel _______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel