---------- Forwarded message ---------- From: Kevin Gordon <kgordon...@gmail.com> Date: Wed, Nov 9, 2011 at 5:33 AM Subject: Re: Re: [Techteam] 12.1.0 devel build 1 released, for XO-1.5 and XO-1 To: fors...@ozonline.com.au
On Tue, Nov 8, 2011 at 8:35 PM, <fors...@ozonline.com.au> wrote: > Some XO-1's can't handle ubifs > http://dev.laptop.org/ticket/11094 > Is there any chance this is related? > It would appear to be unrelated. All three of these XO-1's can run all previous ubifs developer builds. They just cannot boot the 12.1.0 os/1. Kidding aside on my quasi technical comment, on the previous ubifs, the blue squares on the re-flash install animation started on line 1, and continued for almost an entire row, On this one, the squares now start mid-row 2 and are less than a quarter of a row long. Perhaps in an effort to optimize the ubifs file system and reduce the footprint of the install, some important component necessary to boot has been omitted? KG > Tony > > > > > No joy on the XO-1 install. After the update-nand, the machine only > boots > > to the OFW OK prompt. Tried again with Q2E47 (the one that ships with > the > > build), Q2E48, and Q2F05. Tried on multiple XO-1's, CSN7, SHC7, SHF8 > > assemblies, same symptoms. > > > > Doing a check-mark boot gives "Can't open boot device" message. Tried > > another download, another USB key, same symptoms. > > > > Now here's where my incredibly detailed technical analytical skills come > > > to the fore: There seem to be a lot less of those little blue squares > that > > come up during the install process, and they seem to come up in a > different > > spot than they used to, compared to the previous os# ubifs developer > > builds. :-) > > > > Cheers. > > >
_______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel