Hi,

The latest kernel works.
But it is still unstable.

Photo file is here.
http://www.sfc.wide.ad.jp/~macchan/milkymist_linux_0101.jpg

And below is console log.

------------------

Linux version 2.6.33-rc2 (tmats...@tmatsuyaxpc) (gcc version 4.4.0 (GCC) ) #108 
Fri Jan 1 03:04:22 JST 2010
bootconsole [early0] enabled
memory from 40274000 - 44000000
reserving initrd memory: 41002000 size 800000
start_mem is 0x40274000
virtual_end is 0x44000000
before free_area_init
free_area_init -> start_mem is 0x40274000
virtual_end is 0x44000000
after free_area_init
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 276352
Kernel command line: root=/dev/ram video=milkymistfb:mode:1024x768

PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Memory available: 44556k/65536k RAM, (2376k kernel code, 72k data)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:32
Console: colour dummy device 80x25
console [tty0] enabled, bootconsole disabled
console [ttyS0] enabled
milkymist_uart: registered real console
Calibrating delay loop... 156.87 BogoMIPS (lpj=784384)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (junk in compressed archive); looks like an initrd
Freeing initrd mem: 8191k freed
ROMFS MTD (C) 2007 Red Hat, Inc.
io scheduler noop registered (default)
Console: switching to colour frame buffer device 128x48
fb0: Milkymist frame buffer at 43200000, size 1600 k
fb0: mode is 1024x768
milkymist_uart: Milkymist UART driver
ttyS0 at I/O 0x0 (irq = 3) is a milkymist_uart
milkymist_uart: added port 0 with irq 3-4 at 0x80000000
brd: module loaded
loop: module loaded
xsysace xsysace.0: Xilinx SystemACE revision 1.0.12
xsysace xsysace.0: capacity: 3992688 sectors
 xsa: xsa1
Xilinx SystemACE device driver, major=254
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
milkymist_ps2: Keyboard connector at 0x80007000 irq 11
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
input: AT Raw Set 2 keyboard as /devices/platform/milkbd.0/serio0/input/input0
milkymist_ps2: Mouse connector at 0x80008000 irq 12
atkbd.c: keyboard reset failed on milkymist/ps2mouse
milkymist_ps2: Mouse connector at 0x80008000 irq 12
input: ImPS/2 Generic Wheel Mouse as 
/devices/platform/milkmouse.0/serio1/input/input1
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 8192KiB [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem) readonly on device 1:0.
mount: mounting /dev/root on / failed: Invalid argument
init: Booting to single user mode


root:/> uname -a

Linux milkymist_ml401 2.6.33-rc2 #108 Fri Jan 1 03:04:22 JST 2010 lm32 unknown

root:/> cat /proc/cpuinfo

CPU:            lm32
MMU:            none
FPU:            none
Clocking:       98.0MHz
BogoMips:       156.87
Calibration:    78438400 loops

root:/> cat /proc/bus/input/devices

I: Bus=0011 Vendor=0001 Product=0002 Version=ab83
N: Name="AT Raw Set 2 keyboard"
P: Phys=milkymist/ps2keyboard/input0
S: Sysfs=/devices/platform/milkbd.0/serio0/input/input0
U: Uniq=
H: Handlers=kbd 
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name="ImPS/2 Generic Wheel Mouse"
P: Phys=milkymist/ps2mouse/input0
S: Sysfs=/devices/platform/milkmouse.0/serio1/input/input1
U: Uniq=
H: Handlers=
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103

root:/> cat /proc/devices

Character devices:
  1 mem
  2 pty
  3 ttyp
  4 /dev/vc/0
  4 tty
  4 ttyS
  5 /dev/tty
  5 /dev/console
  5 /dev/ptmx
  7 vcs
 10 misc
 13 input
 29 fb
108 ppp
128 ptm
136 pts

Block devices:
  1 ramdisk
259 blkext
  7 loop
254 xsysace

root:/> 

------------------
Takeshi

_______________________________________________
http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org
IRC: #milkym...@freenode
Webchat: www.milkymist.org/irc.html
Wiki: www.milkymist.org/wiki

Reply via email to