>>>>> "Yanjun" == Yanjun Luo <yanjun....@gmail.com> writes:
Yanjun> Hi all, Based on the discussed of IRC, I design a JTAG cable for
Yanjun> Milkymist, this is first time I use KiCad, I don't know if there
Yanjun> any problems or not. Please review the design.
Yanjun> The board support one 3.3V UART and one JTAG from 1.65V to 5.5V,
Yanjun> so Milkymist's 2.5V is ok.
Yanjun> I don't know if everybody installed KiCad, so I send PS format
Yanjun> now, if anybody need KiCad, I'll send it later.
Yanjun> BTW, after several hours struggle, I think I can use KiCad to
Yanjun> design schematic now. I'll start PCB layout when schematic is
Yanjun> ok.
Consider using the FT2232H
It is not more expensive and provides higher JTAG speed.
--
Uwe Bonnes b...@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
_______________________________________________
http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org
IRC: #milkym...@freenode
Webchat: www.milkymist.org/irc.html
Wiki: www.milkymist.org/wiki
