Here is what I was able to do - note that the resolve messages are
associated with the specific hostname, not the overall map:
<map>
<host name="graywolf54.lanl.gov" slots="1" max_slots="0">
<noderesolve name="graywolf54.lanl.gov" resolved="localhost"/>
<process rank="0"/>
<process rank="1"/>
<process rank="2"/>
</host>
</map>
Will that work for you? If you like, I can remove the name= field from
the noderesolve element since the info is specific to the host element
that contains it. In other words, I can make it look like this:
<map>
<host name="graywolf54.lanl.gov" slots="1" max_slots="0">
<noderesolve resolved="localhost"/>
<process rank="0"/>
<process rank="1"/>
<process rank="2"/>
</host>
</map>
if that would help.
Ralph
On Jan 14, 2009, at 7:57 AM, Ralph Castain wrote:
We -may- be able to do a more formal XML output at some point. The
problem will be the natural interleaving of stdout/err from the
various procs due to the async behavior of MPI. Mpirun receives
fragmented output in the forwarding system, limited by the buffer
sizes and the amount of data we can read at any one "bite" from the
pipes connecting us to the procs. So even though the user -thinks-
they output a single large line of stuff, it may show up at mpirun
as a series of fragments. Hence, it gets tricky to know how to put
appropriate XML brackets around it.
Given this input about when you actually want resolved name info, I
can at least do something about that area. Won't be in 1.3.0, but
should make 1.3.1.
As for XML-tagged stdout/err: the OMPI community asked me not to
turn that feature "on" for 1.3.0 as they felt it hasn't been
adequately tested yet. The code is present, but cannot be activated
in 1.3.0. However, I believe it is activated on the trunk when you
do --xml --tagged-output, so perhaps some testing will help us debug
and validate it adequately for 1.3.1?
Thanks
Ralph
On Jan 14, 2009, at 7:02 AM, Greg Watson wrote:
Ralph,
The only time we use the resolved names is when we get a map, so we
consider them part of the map output.
If quasi-XML is all that will ever be possible with 1.3, then you
may as well leave as-is and we will attempt to clean it up in
Eclipse. It would be nice if a future version of ompi could output
correct XML (including stdout) as this would vastly simplify the
parsing we need to do.
Regards,
Greg
On Jan 13, 2009, at 3:30 PM, Ralph Castain wrote:
Hmmm...well, I can't do either for 1.3.0 as it is departing this
afternoon.
The first option would be very hard to do. I would have to expose
the display-map option across the code base and check it prior to
printing anything about resolving node names. I guess I should
ask: do you only want noderesolve statements when we are
displaying the map? Right now, I will output them regardless.
The second option could be done. I could check if any "display"
option has been specified, and output the <ompi> root at that time
(likewise for the end). Anything we output in-between would be
encapsulated between the two, but that would include any user
output to stdout and/or stderr - which for 1.3.0 is not in xml.
Any thoughts?
Ralph
PS. Guess I should clarify that I was not striving for true XML
interaction here, but rather a quasi-XML format that would help
you to filter the output. I have no problem trying to get to
something more formally correct, but it could be tricky in some
places to achieve it due to the inherent async nature of the beast.
On Jan 13, 2009, at 12:17 PM, Greg Watson wrote:
Ralph,
The XML is looking better now, but there is still one problem. To
be valid, there needs to be only one root element, but currently
you don't have any (or many). So rather than:
<noderesolve name="node0" resolved="Jarrah.local"/>
<noderesolve name="node1" resolved="Jarrah.local"/>
<map>
<host name="Jarrah.local" slots="8" max_slots="0">
<process rank="0"/>
<process rank="1"/>
<process rank="2"/>
<process rank="3"/>
<process rank="4"/>
</host>
</map>
the XML should be:
<map>
<noderesolve name="node0" resolved="Jarrah.local"/>
<noderesolve name="node1" resolved="Jarrah.local"/>
<host name="Jarrah.local" slots="8" max_slots="0">
<process rank="0"/>
<process rank="1"/>
<process rank="2"/>
<process rank="3"/>
<process rank="4"/>
</host>
</map>
or:
<ompi>
<noderesolve name="node0" resolved="Jarrah.local"/>
<noderesolve name="node1" resolved="Jarrah.local"/>
<map>
<host name="Jarrah.local" slots="8" max_slots="0">
<process rank="0"/>
<process rank="1"/>
<process rank="2"/>
<process rank="3"/>
<process rank="4"/>
</host>
</map>
</ompi>
Would either of these be possible?
Thanks,
Greg
On Dec 8, 2008, at 2:18 PM, Greg Watson wrote:
Ok thanks. I'll test from trunk in future.
Greg
On Dec 8, 2008, at 2:05 PM, Ralph Castain wrote:
Working its way around the CMR process now.
Might be easier in the future if we could test/debug this in
the trunk, though. Otherwise, the CMR procedure will fall
behind and a fix might miss a release window.
Anyway, hopefully this one will make the 1.3.0 release cutoff.
Thanks
Ralph
On Dec 8, 2008, at 9:56 AM, Greg Watson wrote:
Hi Ralph,
This is now in 1.3rc2, thanks. However there are a couple of
problems. Here is what I see:
[Jarrah.watson.ibm.com:58957] <noderesolve name="node0"
resolved="Jarrah.watson.ibm.com">
For some reason each line is prefixed with "[...]", any idea
why this is? Also the end tag should be "/>" not ">".
Thanks,
Greg
On Nov 24, 2008, at 3:06 PM, Greg Watson wrote:
Great, thanks. I'll take a look once it comes over to 1.3.
Cheers,
Greg
On Nov 24, 2008, at 2:59 PM, Ralph Castain wrote:
Yo Greg
This is in the trunk as of r20032. I'll bring it over to 1.3
in a few days.
I implemented it as another MCA param
"orte_show_resolved_nodenames" so you can actually get the
info as you execute the job, if you want. The xml tag is
"noderesolve" - let me know if you need any changes.
Ralph
On Oct 22, 2008, at 11:55 AM, Greg Watson wrote:
Ralph,
I guess the issue for us is that we will have to run two
commands to get the information we need. One to get the
configuration information, such as version and MCA
parameters, and one to get the host information, whereas it
would seem more logical that this should all be available
via some kind of "configuration discovery" command. I
understand the issue with supplying the hostfile though, so
maybe this just points at the need for us to separate
configuration information from the host information. In any
case, we'll work with what you think is best.
Greg
On Oct 20, 2008, at 4:49 PM, Ralph Castain wrote:
Hmmm...just to be sure we are all clear on this. The
reason we proposed to use mpirun is that "hostfile" has no
meaning outside of mpirun. That's why ompi_info can't do
anything in this regard.
We have no idea what hostfile the user may specify until
we actually get the mpirun cmd line. They may have
specified a default-hostfile, but they could also specify
hostfiles for the individual app_contexts. These may or
may not include the node upon which mpirun is executing.
So the only way to provide you with a separate command to
get a hostfile<->nodename mapping would require you to
provide us with the default-hostifle and/or hostfile cmd
line options just as if you were issuing the mpirun cmd.
We just wouldn't launch - but it would be the exact
equivalent of doing "mpirun --do-not-launch".
Am I missing something? If so, please do correct me - I
would be happy to provide a tool if that would make it
easier. Just not sure what that tool would do.
Thanks
Ralph
On Oct 19, 2008, at 1:59 PM, Greg Watson wrote:
Ralph,
It seems a little strange to be using mpirun for this,
but barring providing a separate command, or using
ompi_info, I think this would solve our problem.
Thanks,
Greg
On Oct 17, 2008, at 10:46 AM, Ralph Castain wrote:
Sorry for delay - had to ponder this one for awhile.
Jeff and I agree that adding something to ompi_info
would not be a good idea. Ompi_info has no knowledge or
understanding of hostfiles, and adding that capability
to it would be a major distortion of its intended use.
However, we think we can offer an alternative that might
better solve the problem. Remember, we now treat
hostfiles in a very different manner than before - see
the wiki page for a complete description, or "man
orte_hosts".
So the problem is that, to provide you with what you
want, we need to "dump" the information from whatever
default-hostfile was provided, and, if no default-
hostfile was provided, then the information from each
hostfile that was provided with an app_context.
The best way we could think of to do this is to add
another mpirun cmd line option --dump-hostfiles that
would output the line-by-line name from the hostfile
plus the name we resolved it to. Of course, --xml would
cause it to be in xml format.
Would that meet your needs?
Ralph
On Oct 15, 2008, at 3:12 PM, Greg Watson wrote:
Hi Ralph,
We've been discussing this back and forth a bit
internally and don't really see an easy solution. Our
problem is that Eclipse is not running on the head
node, so gethostbyname will not necessarily resolve to
the same address. For example, the hostfile might refer
to the head node by an internal network address that is
not visible to the outside world. Since gethostname
also looks in /etc/hosts, it may resolve locally but
not on a remote system. The only think I can think of
would be, rather than us reading the hostfile directly
as we do now, to provide an option to ompi_info that
would dump the hostfile using the same rules that you
apply when you're using the hostfile. Would that be
feasible?
Greg
On Sep 22, 2008, at 4:25 PM, Ralph Castain wrote:
Sorry for delay - was on vacation and am now trying to
work my way back to the surface.
I'm not sure I can fix this one for two reasons:
1. In general, OMPI doesn't really care what name is
used for the node. However, the problem is that it
needs to be consistent. In this case, ORTE has already
used the name returned by gethostname to create its
session directory structure long before mpirun reads a
hostfile. This is why we retain the value from
gethostname instead of allowing it to be overwritten
by the name in whatever allocation we are given. Using
the name in hostfile would require that I either find
some way to remember any prior name, or that I tear
down and rebuild the session directory tree - neither
seems attractive nor simple (e.g., what happens when
the user provides multiple entries in the hostfile for
the node, each with a different IP address based on
another interface in that node? Sounds crazy, but we
have already seen it done - which one do I use?).
2. We don't actually store the hostfile info anywhere
- we just use it and forget it. For us to add an XML
attribute containing any hostfile-related info would
therefore require us to re-read the hostfile. I could
have it do that -only- in the case of "XML output
required", but it seems rather ugly.
An alternative might be for you to simply do a
"gethostbyname" lookup of the IP address or hostname
to see if it matches instead of just doing a strcmp.
This is what we have to do internally as we frequently
have problems with FQDN vs. non-FQDN vs. IP addresses
etc. If the local OS hasn't cached the IP address for
the node in question it can take a little time to DNS
resolve it, but otherwise works fine.
I can point you to the code in OPAL that we use - I
would think something similar would be easy to
implement in your code and would readily solve the
problem.
Ralph
On Sep 19, 2008, at 7:18 AM, Greg Watson wrote:
Ralph,
The problem we're seeing is just with the head node.
If I specify a particular IP address for the head
node in the hostfile, it gets changed to the FQDN
when displayed in the map. This is a problem for us
as we need to be able to match the two, and since
we're not necessarily running on the head node, we
can't always do the same resolution you're doing.
Would it be possible to use the same address that is
specified in the hostfile, or alternatively provide
an XML attribute that contains this information?
Thanks,
Greg
On Sep 11, 2008, at 9:06 AM, Ralph Castain wrote:
Not in that regard, depending upon what you mean by
"recently". The only changes I am aware of wrt nodes
consisted of some changes to the order in which we
use the nodes when specified by hostfile or -host,
and a little #if protectionism needed by Brian for
the Cray port.
Are you seeing this for every node? Reason I ask: I
can't offhand think of anything in the code base
that would replace a host name with the FQDN because
we don't get that info for remote nodes. The only
exception is the head node (where mpirun sits) - in
that lone case, we default to the name returned to
us by gethostname(). We do that because the head
node is frequently accessible on a more global basis
than the compute nodes - thus, the FQDN is required
to ensure that there is no address confusion on the
network.
If the user refers to compute nodes in a hostfile or
-host (or in an allocation from a resource manager)
by non-FQDN, we just assume they know what they are
doing and the name will correctly resolve to a
unique address.
On Sep 10, 2008, at 9:45 AM, Greg Watson wrote:
Hi,
Has there been a change in the behavior of the -
display-map option has changed recently in the 1.3
branch. We're now seeing the host name as a fully
resolved DN rather than the entry that was
specified in the hostfile. Is there any particular
reason for this? If so, would it be possible to add
the hostfile entry to the output since we need to
be able to match the two?
Thanks,
Greg
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel