Dear Group, I wiped my previous non-working samba4 versions along with openchange directory clean from my computer and started from scratch to download latest svn trunk and compiling it. I went through all the steps, but samba4 is still broken. It does not type all of the messages as they appear on mapiproxy.org web site. Also the "provision" executable in setup directory under openchange is absent.
I did it after I received the email from Julien, that he made the openchange work again. I also tried to get samba 4 directly from the open source site, but that process did not work either. When I ran samba -d5 -i -M single, and it still can not find mapiproxy. The whole message script follows. We want to evaluate this product in our company and integrate with our appliances to accelerate WAN traffic. I am the person made in charge of this project and my job can be on line, if I do not evalute and make this product work. *Please help.* ############ lp_load: refreshing parameters from /usr/local/samba/etc/smb.conf params.c:pm_process() - Processing configuration file "/usr/local/samba/etc/smb.conf" Processing section "[global]" Processing section "[globals]" Processing section "[netlogon]" Processing section "[sysvol]" Global parameter workgroup found in service section! Global parameter server string found in service section! Global parameter security found in service section! Unknown parameter encountered: "load printers" Ignoring unknown parameter "load printers" Global parameter log file found in service section! Unknown parameter encountered: "max log size" Ignoring unknown parameter "max log size" Global parameter dns proxy found in service section! Processing section "[homes]" Unknown parameter encountered: "writable" Ignoring unknown parameter "writable" Processing section "[printers]" Unknown parameter encountered: "guest ok" Ignoring unknown parameter "guest ok" Unknown parameter encountered: "writable" Ignoring unknown parameter "writable" pm_process() returned Yes adding hidden service IPC$ adding hidden service ADMIN$ samba version 4.0.0alpha10 started. Copyright Andrew Tridgell and the Samba Team 1992-2009 GENSEC backend 'krb5' registered GENSEC backend 'fake_gssapi_krb5' registered GENSEC backend 'schannel' registered GENSEC backend 'spnego' registered GENSEC backend 'gssapi_spnego' registered GENSEC backend 'gssapi_krb5' registered GENSEC backend 'gssapi_krb5_sasl' registered GENSEC backend 'ntlmssp' registered NTPTR backend 'simple_ldb' NTVFS backend 'simple' for type 1 registered NTVFS backend 'cifs' for type 1 registered NTVFS backend 'nbench' for type 1 registered NTVFS backend 'unixuid' for type 1 registered NTVFS backend 'unixuid' for type 3 registered NTVFS backend 'unixuid' for type 2 registered NTVFS backend 'cifsposix' for type 1 registered NTVFS backend 'smb2' for type 1 registered NTVFS backend 'default' for type 2 registered NTVFS backend 'default' for type 3 registered NTVFS backend 'default' for type 1 registered NTVFS backend 'posix' for type 1 registered PROCESS_MODEL 'standard' registered PROCESS_MODEL 'prefork' registered PROCESS_MODEL 'single' registered AUTH backend 'winbind_samba3' registered AUTH backend 'winbind' registered AUTH backend 'winbind_wbclient' registered AUTH backend 'server' registered AUTH backend 'name_to_ntstatus' registered AUTH backend 'fixed_challenge' registered AUTH backend 'unix' registered AUTH backend 'anonymous' registered AUTH backend 'sam' registered AUTH backend 'sam_ignoredomain' registered SHARE backend [ldb] registered. SHARE backend [classic] registered. (normal if no LDAP backend required) Could not find entry to match filter: '(&(objectclass=ldapSecret)(cn=SAMDB Credentials))' base: '(null)' ldb: no modules required by the db ldb: No modules specified for this database ldb_wrap open of sam.ldb ldb: no modules required by the db ldb: No modules specified for this database ldb_wrap open of privilege.ldb ldb: no modules required by the db ldb: No modules specified for this database ldb_wrap open of /usr/local/samba/private/schannel.ldb samba: using 'single' process model DCERPC endpoint server 'wkssvc' registered DCERPC endpoint server 'drsuapi' registered DCERPC endpoint server 'spoolss' registered DCERPC endpoint server 'winreg' registered DCERPC endpoint server 'epmapper' registered DCERPC endpoint server 'srvsvc' registered DCERPC endpoint server 'netlogon' registered DCERPC endpoint server 'browser' registered DCERPC endpoint server 'rpcecho' registered DCERPC endpoint server 'unixinfo' registered DCERPC endpoint server 'samr' registered DCERPC endpoint server 'remote' registered DCERPC endpoint server 'dssetup' registered DCERPC endpoint server 'lsarpc' registered dcesrv_interface_register: interface 'epmapper' registered on endpoint 'ncacn_np:[\pipe\epmapper]' dcesrv_interface_register: interface 'epmapper' registered on endpoint 'ncacn_ip_tcp:[135]' dcesrv_interface_register: interface 'epmapper' registered on endpoint 'ncalrpc:[EPMAPPER]' *dcesrv_init_context: failed to find endpoint server = 'mapiproxy' task_server_terminate: [Failed to startup dcerpc server task] samba_terminate: Failed to startup dcerpc server task *NPX6216# ############ Thanks nagrik On Thu, May 13, 2010 at 4:42 PM, <[email protected]> wrote: > Send devel mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://mailman.openchange.org/listinfo/devel > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of devel digest..." > > > Today's Topics: > > 1. OpenChange [r1784] changes (Julien Kerihuel) > 2. Re: samba server starting gives error messages on one starts > successfully on other (Julien Kerihuel) > 3. Re: samba server starting gives error messages on one starts > successfully on other (Vinay Nagrik) > 4. Re: samba server starting gives error messages on one starts > successfully on other (Vinay Nagrik) > 5. Re: samba server starting gives error messages on one starts > successfully on other (Brad Hards) > 6. Re: samba server starting gives error messages on one starts > successfully on other (Girish V) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 13 May 2010 23:38:21 +0200 > From: Julien Kerihuel <[email protected]> > To: devel <[email protected]> > Subject: [openchange][devel] OpenChange [r1784] changes > Message-ID: <[email protected]> > Content-Type: text/plain; charset="us-ascii" > > Hi List, > > I'm pleased to let you know that after a "10 hours rush", OpenChange now > works again with latest Samba4 git master branch. > > I have spent a LOT of time fixing the schema. The result is not really > great (in term of design) but it works. I had to make sure our schema > passes Samba4 schema rules/policy. > > The r1784 revision has been tested using: > - mapitest: all tests OK > - openchangepfadmin: user creation/deletion OK > - openchange server provisioning OK > - openchange server vs Outlook 2003: > - profile creation OK > - returns user mailbox to Outlook OK > > If you start using this revision, please remind alpha10 or alpha11 > releases are no longer supported and you won't be able to build > OpenChange properly unless you move to latest samba4 git master branch. > > I will update in next revision the installsamba script + do some tests > using waf to improve samba4 compilation within openchange. > > Cheers, > Julien. > > -- > Julien Kerihuel > [email protected] > OpenChange Project Manager > > GPG Fingerprint: 0B55 783D A781 6329 108A B609 7EF6 FE11 A35F 1F79 > > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: not available > Type: application/pgp-signature > Size: 197 bytes > Desc: This is a digitally signed message part > URL: < > http://mailman.openchange.org/pipermail/devel/attachments/20100513/05984528/attachment-0001.pgp > > > >
_______________________________________________ devel mailing list [email protected] http://mailman.openchange.org/listinfo/devel
