Hello Werner/Openmoko Team, I have good experience of WAP/SMS/MMS for (LG, Samsung) handsets. I have worked with both LG and Samsung for around 3 years in above technologies for mobiles.
Openmoko being an opensource, i am keen to contribute into applications like WAP/SMS, WAP browser, WAP protocol stack (1.X,2.X) and more into mobile software platform development and mobile applications. I can also contribute into Layer1, device drivers etc. I have special interest into openmoko because currently I am Lead Developer in design of an serverless instant messenger retromessenger ( http://retromessenger.sourceforge.net/) and i am planning to make a Mobile port for this and then retromessenger application can be run on openmoko as well. But here i Need a starting point to Set up openmoko-development environment. and to understand the openmoko platform. Can some one guide me for setting up openmoko environment on my system. Thanks & Regards, Mahendra On Tue, Oct 7, 2008 at 12:02 PM, Werner Almesberger <[EMAIL PROTECTED]>wrote: > mahendra panpalia wrote: > > >> Using FDOM, ASU 2008.8 and ASU 2008.9, it is impossible to join my > home > > >> and work WEP enabled network using the "Settings" application. > > Does it work if running iwconfig from a shell ? We know that there > are a number of issues with the GUI way of doing things, and it seems > they're hard to solve. > > While our GUI people are working on that problem, I'm interested in > any showstoppers we may have at the layers below, i.e., in the > various wireless tools, kernel, or (let's hope not) firmware. > > The canonical way of running iwconfig for WEP would be something like > this: > > # iwconfig eth0 key A4BEB3B8EC essid xyz > > Two things are important here: > > - the key must be in hex. iwconfig will not do anything useful if > the key is given as a string. > > - the ESSID must follow the key. > > If an incorrect key was set, please stop all activity on the interface > for at least two minutes (i.e., killall udhcpc and ifconfig eth0 down), > then issue the correct iwconfig command and retry. > > Thanks, > - Werner > -- Thanks & kind regards, Mahendra P. Mob: +44 78260 46167
_______________________________________________ devel mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/devel
