Werner,
Werner Almesberger wrote:
Phil wrote:
What can I do to debug the problem?
Maybe let's start with a few more details:
- do you use encryption and if yes, what kind ?
/etc/wpa_supplicant/wpa_supplicant.conf
with a ssid and psk
- what AP brand/model is this ?
Linksys WRT54G
- is there anything in dmesg ?
Attached.
- does your machine suspend during the test ?
No - I can still run "ifdown/ifup eth0", /etc/init.d/networking
stop/start etc
When looking into WLAN problems, one of the first things I usually do
is to try to see if it's something that comes from the lower reaches
of the system (kernel, firmware, system tools, etc.), or higher layers
which are still very much in flux (middleware and GUI).
To determine this, I kill pretty much all processes but udevd and
dropbear, so that I can be sure user space won't reconfigure things
behind my back, suspend, or such.
"All processes"? - do you do this from a ssh login? I presume I could
start from the highest numbered processes and work down?
Then I set up the network manually and see if the problem still exists.
So if you could do this and report your findings, that would be great.
OK, I'll try that approach and see what happens.
Thanks,
Phil.
--
Philip Rhoades
GPO Box 3411
Sydney NSW 2001
Australia
E-mail: [EMAIL PROTECTED]
ket layer initialized
pnp: the driver 'system' has been registered
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
s3c24xx_pwm s3c24xx_pwm.0: s3c24xx_pwm is registered
Enabling FIQ using irq 29
not changing prescaler of PWM 3, since it's shared with timer4 (clock tick)
NetWinder Floating Point Emulator V0.97 (double precision)
neo1973-version neo1973-version.0: starting
neo1973-pm-host neo1973-pm-host.0: starting
neo1973-resume neo1973-resume.0: starting
neo1973-memconfig neo1973-memconfig.0: starting
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
glamo3362 glamo3362.0: Detected Glamo core 3650 Revision 0002 (49119232Hz CPU /
81887232Hz Memory)
glamo3362 glamo3362.0: Glamo core now 49119232Hz CPU / 89980928Hz Memory)
Detected S-Media IRQ# pullup, enabling interrupt
glamo-spi-gpio glamo-spi-gpio.0: registering c03b9500: jbt6k74
SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc.
Console: switching to colour frame buffer device 80x58
fb0: SMedia Glamo frame buffer device
glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc
glamo-mci glamo-mci.0: probe: mapped mci_base:c8864400 irq:0.
glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
glamo-mci glamo-mci.0: initialisation done.
mmc_set_power(power_mode=1, vdd=20
physmap platform flash device: 00200000 at 18000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0039
Intel/Sharp Extended Query Table at 0x0039
Intel/Sharp Extended Query Table at 0x0039
Intel/Sharp Extended Query Table at 0x0039
Intel/Sharp Extended Query Table at 0x0039
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x2000,blocks=8
erase region 1: offset=0x10000,size=0x10000,blocks=31
physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB
RedBoot partition parsing not available
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=3, 30ns Twrph0=7 70ns, Twrph1=3 30ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V
8-bit)
s3c2410_nand_update_chip: chip c7c8b8b8: 11
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: Bad block at 0x0b780000
nand_read_bbt: Bad block at 0x0bb40000
6 cmdlinepart partitions found on MTD device neo1973-nand
Creating 6 MTD partitions on "neo1973-nand":
0x00000000-0x00040000 : "u-boot"
0x00040000-0x00080000 : "u-boot_env"
0x00080000-0x00880000 : "kernel"
0x00880000-0x00920000 : "splash"
0x00920000-0x00960000 : "factory"
0x00960000-0x10000000 : "rootfs"
spi_s3c24xx_gpio spi_s3c24xx_gpio.1: registering c03b947c: lis302dl
spi_s3c24xx_gpio spi_s3c24xx_gpio.1: registering c03b94a8: lis302dl
usbmon: debugfs is not available
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
s3c2410_udc: debugfs dir creation failed -19
s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
gta02_udc_command(2)
ether gadget: using random self ethernet address
ether gadget: using random host ethernet address
usb0: Ethernet Gadget, version: May Day 2005
usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk
usb0: MAC 62:5f:93:5a:4b:9a
usb0: HOST MAC 0e:09:d9:96:1d:9e
usb0: RNDIS ready
gta02_udc_command(1)
mice: PS/2 mouse device common for all mice
input: Neo1973 Buttons as /devices/platform/neo1973-button.0/input/input0
wake enabled for irq 48
s3c2440-ts s3c2440-ts: successfully loaded
input: s3c2410 TouchScreen as /devices/virtual/input/input1
input: lis302-1 (top) as /devices/virtual/input/input2
lis302dl spi0.0: Found lis302-1 (top)
input: lis302-2 (bottom) as /devices/virtual/input/input3
lis302dl spi0.1: Found lis302-2 (bottom)
i2c /dev entries driver
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
input: GTA02 PMU events as
/devices/platform/s3c2440-i2c/i2c-adapter/i2c-0/0-0073/input/input4
wake enabled for irq 53
pcf50633: dev (254:0)
pcf50633 0-0073: rtc core: registered pcf50633 as rtc0
pcf50633 0-0073: probe completed
neo1973-pm-bt neo1973-pm-bt.0: FIC Neo1973 Bluetooth Power Management: starting
SD power -> 3200mV
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus
width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz).
Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz).
Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz).
Bus width=0
glamo-mci glamo-mci.0: Error after cmd: 0x120
glamo-mci glamo-mci.0: Error after cmd: 0x8120
glamo-mci glamo-mci.0: Error after cmd: 0x120
glamo-mci glamo-mci.0: Error after cmd: 0x8120
glamo-mci glamo-mci.0: Error after cmd: 0x120
mmc_set_power(power_mode=2, vdd=15
SD power -> 2700mV
neo1973-pm-gps neo1973-pm-gps.0: FIC Neo1973 GPS Power Managerment:starting
bq27000-battery bq27000-battery.0: BQ27000 Battery Driver (C) 2008 Openmoko, Inc
power_supply bat: driver failed to report `status' property
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
S3c2440 SDIO Host controller
pnp: the driver 'sdio_s3c24xx_hcd' has been registered
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz).
Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz).
Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz).
Bus width=0
glamo-mci glamo-mci.0: Error after cmd: 0x120
mapped channel 0 to 0
S3c24xx SDIO: IRQ:37 Detect IRQ:0 DMA channel:0 [EMAIL PROTECTED] [EMAIL
PROTECTED] kHz
sdio_s3c24xx_hcd 00:00: driver attached
sdio_s3c24xx_hcd 00:00: SDIO device, IDs SD_0008 (active)
pnp: the driver 'sdio_wlan' has been registered
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz).
Bus width=0
Registered led device: neo1973:vibrator
Registered led device: gta02-power:orange
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz).
Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz).
Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz).
Bus width=2
mmc0: new high speed SD card at address b368
mmcblk0: mmc0:b368 UD 498176KiB
mmcblk0:<6>Registered led device: gta02-power:blue
p1
Registered led device: gta02-aux:red
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42
2007 UTC).
ASoC version 0.13.1
Only GTA01 hardware supported by ASoc driver
wm8753: WM8753 Audio Codec 0.16
asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok
asoc: WM8753 Voice <-> Bluetooth mapping ok
ALSA device list:
#0: neo1973-gta02 (WM8753)
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
pcf50633 0-0073: setting system clock to 2008-10-14 20:38:02 UTC (1224016682)
CRCFAIL 0x1a3f
CRCFAIL 0x1a3f
CRCFAIL 0x1a3f
sdio_wlan 00:01: driver attached
sdio_wlan 00:01: SDIO device, IDs SD_0001 (active)
BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
SDIO_INT_CTRL enable IRQ
AR6000 Reg Code = 0x40000060
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 132K
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev mmcblk0.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev mmcblk0.
ar6000_ioctl_giwscan(): data length 0
ar6000_ioctl_giwscan(): data length 0
AR6000 Reg Code = 0x80000114
JFFS2 warning: (1442) jffs2_sum_write_sumnode: Not enough space for summary,
padsize = -636
power_supply bat: driver failed to report `time_to_full_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_full_now' property
power_supply bat: driver failed to report `charge_full' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_full_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_full_now' property
power_supply bat: driver failed to report `time_to_full_now' property
power_supply bat: driver failed to report `capacity' property
power_supply bat: driver failed to report `time_to_full_now' property
power_supply bat: driver failed to report `current_now' property
channel hint set to 2472
AR6000 connected event on freq 2472 with bssid 00:1c:10:09:8e:32
listenInterval=100, beaconInterval = 100, beaconIeLen = 24 assocReqLen=53
assocRespLen =22
Network: Infrastructure
AR6000 disconnected from 00:1c:10:09:8e:32
AR6000 connected event on freq 2472 with bssid 00:1c:10:09:8e:32
listenInterval=100, beaconInterval = 100, beaconIeLen = 24 assocReqLen=53
assocRespLen =22
Network: Infrastructure
power_supply bat: driver failed to report `charge_full' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `capacity' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `capacity' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `capacity' property
power_supply bat: driver failed to report `capacity' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `capacity' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `capacity' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `capacity' property
debug_hdr_ptr: 0x800018b0
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `capacity' property
power_supply bat: driver failed to report `current_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
power_supply bat: driver failed to report `time_to_empty_now' property
_______________________________________________
devel mailing list
[email protected]
https://lists.openmoko.org/mailman/listinfo/devel
