-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Somebody in the thread at some point said: | Hi Andy, | | Sorry for not making it clear. | | Actually what happens is: | | 1) When I try booting | (after flashing Qi into NAND from NOR flash mode and inserting SD card | with ext3 partition containing Android images) by pressing the | Power button for 10 secs, the device stops at the splash screen. | Then I did cu to check what happened, I got the following: | | NAND read: device 0 offset 0x880000, size 0x5000 | 20480 bytes read: OK | Hit any key to stop autoboot: 0 | | NAND read: device 0 offset 0x80000, size 0x200000 | 2097152 bytes read: OK | ## Booting kernel from Legacy Image at 32000000 ... | Image Name: OM GTA02 android_458301db547e537 | Created: 2009-01-09 15:30:58 UTC | Image Type: ARM Linux Kernel Image (uncompressed) | Data Size: 2538032 Bytes = 2.4 MB | Load Address: 30008000 | Entry Point: 30008000 | Verifying Checksum ... Bad Data CRC | ERROR: can't get kernel image!
This can be caused if the kernel is bigger than 2MBytes, the U-Boot env var than does the load and boot defaults to ending there. | GTA02v6 # mmcinit | cmd 0x8, arg 0x1aa flags 0x75 | Error after cmd: 0xfffffffc | Card Type: SD | Manufacturer: 0x1b, OEM "SM" | Product name: "SMI ", revision 1.0 | Serial number: 155843909 | Manufacturing date: 11/2007 | MMC/SD size: 497MiB | | GTA02v6 # ext2ls mmc 1:1 /boot | <DIR> 1024 . | <DIR> 1024 .. | 36 append-GTA02 | 2533736 uImage-GTA02.bin | | It reads from NAND flash and not from SD card. | So it fails to read from SD and tries reading | from NAND. I dont know why. | | 2) After flashing QI, NAND menu should not occur | as per wiki, but i see NAND menu when I press | Power first aux next. I dont know why? Dont know | whether I have flashed Qi or not? Right, no, as you suspect Qi would replace NAND U-Boot so you don't see that any more. What dfu-util commandline did you use for this flashing action, I guess the problem is there. You're definitely still running U-Boot above not Qi. - -Andy -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAklws4wACgkQOjLpvpq7dMpJfQCeO7Vp4h0cNN8QfmTyNz/QBgl7 f4YAn1EgIqOWEJQoBgoY6yONvh9urXHX =VWdG -----END PGP SIGNATURE----- _______________________________________________ devel mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/devel
