Update! I am using git latest, and decided to recompile minimal kernel based on the micro configuration, Some setting were required in order to make the ar6000 load, and now after the wmiconfig it actually works!!!!
But now I need to unload/load it after boot as for some strange reason the driver cannot detect its hardware correctly?!?! Also, I am gettings these, and device is not available until reboot. AR6000 disconnected neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0 neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0 mmc1: card 0001 removed ar6000_wow interrupt s3c2440-sdi s3c2440-sdi: powered down. s3c2440-sdi s3c2440-sdi: powered down. Need to figure out how to make this stable. Thank you. Alon. On Tue, Mar 10, 2009 at 12:57 AM, Alon Bar-Lev <[email protected]> wrote: > Thank you! > > No the wmiconfig is not working... > > Even if I can workaround the issue at my home AP, what will happen in > other places...? > > Does anyone know why the wireless driver is not based on standard > kernel wireless interfaces (MAC80211 or IEEE80211)? > > Alon. > > On Mon, Mar 9, 2009 at 3:42 AM, Werner Almesberger <[email protected]> > wrote: >> Alon Bar-Lev wrote: >>> > [1] http://docs.openmoko.org/trac/ticket/1250 >> >> Two things to try: >> >> 1) Does >> wmiconfig -i eth0 --setlongpreamble 0 >> make things work ? >> >> 2) If DD-WRT lets you enable long preambles, doing this should avoid >> the problem. >> >> Please let me know if any of this helps. I'm particularly curious >> about 1). >> >> Thanks, >> - Werner >> > _______________________________________________ devel mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/devel
