Alexander Lehner wrote: > On Tue, 16 Jun 2009, Timo Juhani Lindfors wrote: > > >> Alexander Lehner <[email protected]> writes: >> >>> There is no visible difference between the working state and the state >>> where no satelites were seen:e >>> >> Next time please save the output of stty -F /dev/ttySAC1 -a >> Ok, I have the exact same problem. Since I got my freerunner I only got GPS working *once*. I always thought it was a SW problem, but now I'm starting to think its not. I get rxerr: port ch=0x00, rxs=0x0000000c in dmesg, no satellites visible... nothing. This is the output from stty:
stty -F /dev/ttySAC1 -a speed 9600 baud; rows 24; columns 80; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 0; time = 0; -parenb -parodd cs8 -hupcl -cstopb cread clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff -iuclc -ixany -imaxbel -opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 -isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop -echoprt -echoctl -echoke btw, I tried the plier thingy with no success at all. Right now I'm testing without any sim card or microSD card inserted. What should I try next? Regards, Nikolay P.S. Haven't tried with wine, but beer (and lots of it, btw) doesn't help at all. _______________________________________________ devel mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/devel
