Hi Matthias
Here are a few more hints
You connected to the SDK with a key, but to the Emulator without. A
key can be used for both for passwordless access.
//Connect to SDK
ssh -p 2222 -i ~/SailfishOS/vmshare/ssh/private_keys/engine/mersdk
mersdk@localhost
ssh -p 2222 -i ~/SailfishOS/vmshare/ssh/private_keys/engine/root
root@localhost
//Connect to Emulator
ssh -p 2223 -i
~/SailfishOS/vmshare/ssh/private_keys/SailfishOS_Emulator/nemo
nemo@localhost
ssh -p 2223 -i
~/SailfishOS/vmshare/ssh/private_keys/SailfishOS_Emulator/root
root@localhost
The commands above work on OSX, and should work on Linux.
In your mail below you used zypper to install to the SDK VM, but not
to the build engine with the VM, so that won't really help you. You
have made the package available to the Operating System rather than to
the build engine.
To install "by hand" to the build-engine, either use the SDK Control
Center to search and install the package
or
connect via SSH to the SDK as you describe, then start SB2 and use
zypper within SB2. Then sync from the control center.
Grüsse
Chris
Zitat von "Matthias Barmeier" <barme...@barmeier.com>:
Hi,
thanks a lot.
Your link and this one:
http://flyingsheeponsailfish.blogspot.de/2013/10/alpha-2-migrating-landed.html
has working hints on what packages must be installed and how to make
QtContacts work.
If someone else needs this here is my way of QtContacts enabling:
ssh to mer build engine: ssh -p 2222 -i
/opt/SailfishOS/vmshare/ssh/private_keys/engine/root root@localhost
install a package with: zypper in qt5-qtdeclarative-pim-contacts
Select the Sailfish-Icon on the QtCreator toolbar.
Select Targets -> SailfishOS-i486-x86 -> manage -> sync
On the emulator select settings and set a password for the ssh connection.
ssh to the emulator: ssh -p 2223 nemo@localhost <enter the
password>
Install the same package: sudo pkcon install qt5-qtdeclarative-pim-contacts
Restart both VMs. I don't know if this last step is neccessary, but
after I have done it the error message si gone
and ContactModel is a vailid type.
Thanks again !
Ciao
Matze
Am 21.12.2013 22:14, schrieb christopher.l...@thurweb.ch:
Hi Matthias
As the error says, QtContacts is not installed.
Try this article on tips on how to install to the SDK and Emulator
http://flyingsheeponsailfish.blogspot.ch/2013/11/deploying-additional-packages-to.html It focuses on Location and Positioning, but is the methods used are relevant for QtContacts as
well.
The first thing is to establish what is already installed.
For the SDK, the easiest way for a newbie is via the SDK Control
Center, which is available via the Sailfish icon on the left of the
QtCreator screen.
On the Emulator, once connected via SSH, you can search for
contacts modules with
pkcon search name contacts
I have several contacts modules installed on my Emulator, but then
I have been experimenting with contacts, and will have installed
some of these myself.
Once you have the correct modules installed to the SDK and Emulator
(and synced with QtCreator), then you should be able to use
QtContacts from both C++ and QML.
Ciao
Chris
Zitat von "Matthias Barmeier" <barme...@barmeier.com>:
Hi,
the include error is fixed, but now I am back to my old problem:
[W] unknown:33 -
file:///usr/share/test/qml/pages/FirstPage.qml:33:1: module
"QtContacts" is not installed
import QtContacts 5.0
my QML:
import QtQuick 2.0
import Sailfish.Silica 1.0
import QtContacts 5.0
Page {
id: page
...
my test.cpp:
#ifdef QT_QML_DEBUG
#include <QtQuick>
#endif
#include <sailfishapp.h>
#include <QtContacts/QtContacts>
...
What else must I do ?
Ciao
Matze
Am 21.12.2013 14:36, schrieb Andrey Kozhevnikov:
add
INCLUDEPATH += /usr/include/qt5/QtContacts
to pro file
On 21.12.2013 18:44, Matthias Barmeier wrote:
Hi,
I added the CONFIG line to my project file. And added the
include to my .cpp file, but got this.
/usr/include/qt5/QtContacts/qcontact.h:53:
Fehler:qcontactsglobal.h: No such file or directory
This file is availables under:
/opt/SailfishOS/mersdk/targets/SailfishOS-i486-x86/usr/include/qt5/QtContacts I try to use QtContacts from qml ist this possible
?
Ciao
Matze
Am 21.12.2013 13:04, schrieb Andrey Kozhevnikov:
add it to pro file CONFIG += Qt5Contacts
and then include in Qt <QtContacs/...>
On 21.12.2013 18:02, Matthias Barmeier wrote:
Hi,
I am new to SailfishOS coming from Harmattan. How can I add
this module ?
Is there any Dev Introduction available on how to add modules
or which modules are available ?
Thanks.
Ciao
Matze
Am 21.12.2013 12:59, schrieb Andrey Kozhevnikov:
its Qt5Contacts module
On 21.12.2013 17:58, Matthias Barmeier wrote:
Hi,
is QtContacts available for SDK emulator or Device ? And if
it is available where and how can I get it ?
Ciao
Matze
_______________________________________________
SailfishOS.org Devel mailing list
_______________________________________________
SailfishOS.org Devel mailing list
_______________________________________________
SailfishOS.org Devel mailing list
_______________________________________________
SailfishOS.org Devel mailing list
_______________________________________________
SailfishOS.org Devel mailing list
_______________________________________________
SailfishOS.org Devel mailing list
_______________________________________________
SailfishOS.org Devel mailing list
