Last time I seen error like this when I NIC didn't support pause frames, you might want to check the problem at mentioned source code line no.
-Miline 2008/5/20 melodygh <[EMAIL PROTECTED]>: > Hi, > I used vdisk as FCoE's target device. > I did as follow in target: > mkfs.ext3 /dev/ram0 > echo "open vdisk0 /dev/ram0 WRITE_THROUGH" > /proc/scsi_tgt/vdisk/vdisk > echo "add vdisk0 0" > /proc/scsi_tgt/groups/Default/devices > scstadmin -WriteConfig /etc/scst.config > > > +++++++ > Target: > +++++++ > [EMAIL PROTECTED] scstadmin]# fcconf eth1 enable > fcconf: device file /dev/openfc does not exist- check udev and rules > [EMAIL PROTECTED] scstadmin]# fcconf eth1 enable > fcconf: fcc_fcoe_config: FCoE create of eth1 failed > fcconf: fcc_fcoe_config: error 17 (null) > fcconf: fcc_fcoe_config: exiting at fcc_fcoe.c:142 > > [EMAIL PROTECTED] scstadmin]# fcconf > Name WWPN FC-ID FC Network > eth0 20:00:00:30:48:90:a0:e8 0 No HBA DOWN > eth1 20:00:00:30:48:90:a0:e9 0 No HBA UP > > I capture the frames with wireshark when I connected target to > initiator,there isnt any frames except FLOGI both in target and initator.Is > that means the target layer did not work at all? We used Intel 82573L > NIC.(Also, we changed the hardware but it doesn't work). > > What can we do to resolve this problem? > Thanks. > ------------------------------ > melodygh > 2008-05-20 > > _______________________________________________ > devel mailing list > [email protected] > http://www.open-fcoe.org/mailman/listinfo/devel > > -- Milind Dumbare Sr. Systems Engg. Linsyssoft Technologies.
_______________________________________________ devel mailing list [email protected] http://www.open-fcoe.org/mailman/listinfo/devel
