Brad,
I already followed that. And that library appears in ldconfig -v output.
Here it is:
/usr/local/lib:
libmapiadmin.so.0 -> libmapiadmin.so.0.8
libmapi.so.0 -> libmapi.so.0.8
libgnutls-extra.so.26 -> libgnutls-extra.so.26.11.3
libgnutlsxx.so.26 -> libgnutlsxx.so.26.11.3
libtalloc.so.1 -> libtalloc.so.1.2.0
libgcrypt.so.11 -> libgcrypt.so.11.5.1
libicalvcal.so.0 -> libicalvcal.so.0.42.0
libvmime.so.0 -> libvmime.so.0.0.0
libgnutls.so.26 -> libgnutls.so.26.11.3
libmapiproxy.so.0 -> libmapiproxy.so.0.8
libocpf.so.0 -> libocpf.so.0.8
libical.so.0 -> libical.so.0.42.0
libgnutls-openssl.so.26 -> libgnutls-openssl.so.26.11.3
libgsasl.so.7 -> libgsasl.so.7.6.0
libicalss.so.0 -> libicalss.so.0.42.0
libgpg-error.so.0 -> libgpg-error.so.0.5.0
/usr/local/samba/lib:
libmapiadmin.so.0 -> libmapiadmin.so.0.8
libmapi.so.0 -> libmapi.so.0.8
libdcerpc_atsvc.so.0 -> libdcerpc_atsvc.so.0.0.1
libldb.so.0 -> libldb.so.0.0.1
libtorture.so.0 -> libtorture.so.0.0.1
libtalloc.so.1 -> libtalloc.so.1.2.0
libndr.so.0 -> libndr.so.0.0.1
libmapiproxy.so.0 -> libmapiproxy.so.0.8
libocpf.so.0 -> libocpf.so.0.8
libsamba-hostconfig.so.0 -> libsamba-hostconfig.so.0.0.1
libnss_winbind.so -> libnss_winbind.so
libregistry.so.0 -> libregistry.so.0.0.1
libgensec.so.0 -> libgensec.so.0.0.1
libtdb.so.1 -> libtdb.so.1.1.3
libdcerpc.so.0 -> libdcerpc.so.0.0.1
libdcerpc_samr.so.0 -> libdcerpc_samr.so.0.0.1
and once again, thanks for all your help.
Regards,
Ashvin
On Thu, Dec 4, 2008 at 2:12 PM, Brad Hards <[EMAIL PROTECTED]> wrote:
> On Thursday 04 December 2008 07:34:57 pm you wrote:
> > openchangeclient: error while loading shared libraries: libmapi.so.0:
> > cannot open shared object file: No such file or directory
>
> Well the libraries are missing :-)
>
> I have this problem a lot...
>
> To create them, you need to follow this part of the documentation (from
> doc/howto.txt):
> Since the libraries will be installed in /usr/local/samba/lib,
> ldconfig needs to know about it. On Linux, make sure this directory is
> listed in /etc/ld.so.conf and run 'ldconfig -v'. On FreeBSD, add this
> directory to the line 'ldconfig_paths' in /etc/rc.conf and then run
> 'ldconfig -rv'.
>
> Alternatively, you can create a new entry under /etc/ld.so.conf.d/ (follow
> an
> existing example) and then run ldconfig as shown above.
>
> HTH
>
> Brad
>
_______________________________________________
devel mailing list
[email protected]
http://mailman.openchange.org/listinfo/devel
