Pavel Emelianov <[EMAIL PROTECTED]> writes:
> Hi Eric, Suka, guys.
>
> I have tested the following configurations:
>
> 1. 2.6.21-mm2 kernel with Suka's patches with CONFIG_PID_NS=n
> 2. the same with CONFIG_PID_NS=y
>
> 3. 2.6.22-rc1-mm1 kernel with my own realisation (patches will
> be sent later if interesting) with CONFIG_PID_NS=n;
> 4. the same with CONFIG_PID_NS=y and flat model (OpenVZ view)
> I sent earlier;
> 5. the same with multilevel model of my own. The difference is
> that I use hash to lookup pid_elem from struct pid/pid_t nr,
> not a plain "for" loop like in Suka's patches.
For small levels of nesting a for loop should actually be faster.
These tests were all taken in the initial pid namespace?
Yes. You mention that below.
> The tests run were:
> 1. Unixbench spawn test
> 2. Unixbench execl test
> 3. Unixbensh shell test
> 4. System time for ps -xaf run in a loop (1000 times)
If these test accurately measure what the purport to measure
these appear to fair, and useful for discussion. Although we may have
cache hot vs cache cold effects doing weird things to us.
These results need to be reproduced.
We need to get all of the patches against the same kernel
so we can truly have an apples to apples comparison.
The rough number of pids in the system when the tests are taken needs
to be known.
> The hardware used is 2x Intel(R) Xeon(TM) CPU 3.20GHz box with
> 2Gb of RAM. All the results are reproducible with 0.1% accuracy.
> The slowdown is shown in comparison to the according results for
> CONFIG_PID_NS=n kernel.
>
> Summary:
> Suka's model gives us about 1.5% of overhead.
> My multilevel model gives us about 0.7% of overhead.
> My flat model gives us an overhead comparative to
> the accuracy of the measurement, i.e. zero overhead.
>
> The detailed results are the following:
> Test name: spawn execl shell ps (sys time)
> 1(no ns) : 579.1 618.3 1623.2 3.052s
> 2(suka's): 570.7 610.8 1600.2 3.107s
> Slowdown : 1.5% 1.3% 1.4% 1.8%
>
> 3(no ns) : 580.6 616.0 1633.8 3.050s
> 4(flat) : 580.8 615.1 1632.2 3.054s
> Slowdown : 0% 0.1% <0.1% 0.1%
> 5(multi) : 576.9 611.0 1618.8 3.065s
> Slowdown : 0.6% 0.8% 0.9% 0.5%
Just for my own amusement.
> 1(no ns) : 579.1 618.3 1623.2 3.052s
> 3(no ns) : 580.6 616.0 1633.8 3.050s
-0.25% 0.3% -0.65% 0.065%
> For the first three tests the result is better the higher the
> number is. For the last test - the result is better the lower the
> number is (since it is a time spent in kernel).
>
> The results in the namespace may be worse.
>
> If you are interested I can send my patches for pre-review and
> cooperation. With the results shown I think the we do must have
> the flat model as an option in the kernel for those who don't
> need the infinite nesting, but cares for the kernel performance.
Your results do seem to indicate there is measurable overhead,
although in all cases it is slight. So if we care about performance
we need to look at things very carefully.
Eric
_______________________________________________
Containers mailing list
[EMAIL PROTECTED]
https://lists.linux-foundation.org/mailman/listinfo/containers
_______________________________________________
Devel mailing list
Devel@openvz.org
https://openvz.org/mailman/listinfo/devel
