Vasily Averin wrote: > Alasdair G Kergon wrote: >> So currently we treat bounce_pfn as a property that does not need to be >> propagated through the stack. >> >> But is that the right approach? >> - Is there a blk_queue_bounce() missing either from dm or elsewhere? >> (And BTW can the bio_alloc() that lurks within lead to deadlock?) >> >> Firstly, what's going wrong? >> - What is the dm table you are using? (output of 'dmsetup table') >> - Which dm targets and with how many underlying devices? >> - Which underlying driver? >> - Is this direct I/O to the block device from userspace, or via some >> filesystem or what? > > On my testnode I have 6 Gb memory (1Gb normal zone for i386 kernels), > i2o hardware and lvm over i2o. > > [EMAIL PROTECTED] ~]# dmsetup table > vzvg-vz: 0 10289152 linear 80:5 384 > vzvg-vzt: 0 263127040 linear 80:5 10289536 > [EMAIL PROTECTED] ~]# cat /proc/partitions > major minor #blocks name > > 80 0 143374336 i2o/hda > 80 1 514048 i2o/hda1 > 80 2 4096575 i2o/hda2 > 80 3 2040255 i2o/hda3 > 80 4 1 i2o/hda4 > 80 5 136721151 i2o/hda5 > 253 0 5144576 dm-0 > 253 1 131563520 dm-1 > > Diotest from LTP test suite with ~1Mb buffer size and files on dm-over-i2o > paritions corrupts i2o_iop0_msg_inpool slab. > > I2o on this node is able to handle only requests with up to 38 segments. > Device > mapper correctly creates such requests and as you know it uses > max_pfn=BLK_BOUNCE_ANY. When this request translates to underlying device, it > clones bio and cleans BIO_SEG_VALID flag. > > In this way underlying device calls blk_recalc_rq_segments() to recount number > of segments. However blk_recalc_rq_segments uses bounce_pfn=BLK_BOUNCE_HIGH > taken from underlying device. As result number of segments become over than > max_hw_segments limit. > > Unfortunately there is not any checks and when i2o driver handles this > incorrect > request it fills the memory out of i2o_iop0_msg_inpool slab. > We actually had a similar issue with some raid drivers (gdth iirc), and Neil Brown did a similar patch for it. These were his comments on it: > > dm handles max_hw_segments by using an 'io_restrictions' structure > that keeps the most restrictive values from all component devices. > > So it should not allow more than max_hw_segments. > > However I just notices that it does not preserve bounce_pfn as a restriction. > So when the request gets down to the driver, it may be split up in to more > segments than was expected up at the dm level. > So I guess we should take this.
Cheers, Hannes -- Dr. Hannes Reinecke zSeries & Storage [EMAIL PROTECTED] +49 911 74053 688 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: Markus Rex, HRB 16746 (AG Nürnberg) _______________________________________________ Devel mailing list Devel@openvz.org https://openvz.org/mailman/listinfo/devel