>
>Execution info provided to Martin separately.
I'm currently investigating the snapshot breakage, thanks Elad!
>On Wed, May 30, 2018 at 5:44 PM, Elad Ben Aharon <ebena...@redhat.com>
>wrote:
>
>> Triggered a sanity automation execution using [1], which covers all the
>> requested areas, on iSCSI, NFS and Gluster.
>> I'll update with the results.
>>
>> [1]
>> *https://gerrit.ovirt.org/#/c/90906/ <https://gerrit.ovirt.org/#/c/
90906/>*
>> vdsm-4.20.28-6.gitc23aef6.el7.x86_64
>>
>>
>> On Tue, May 29, 2018 at 4:26 PM, Martin Polednik <mpoled...@redhat.com
>
>> wrote:
>>
>>> On 29/05/18 15:30 +0300, Elad Ben Aharon wrote:
>>>
>>>> Hi Martin,
>>>>
>>>> Can you please create a cerry pick patch that is based on 4.2?
>>>>
>>>
>>> See https://gerrit.ovirt.org/#/c/90906/. The CI failure isn unrelated
>>> (storage needs real env).
>>>
>>> mpolednik
>>>
>>>
>>>
>>>> Thanks
>>>>
>>>> On Tue, May 29, 2018 at 1:34 PM, Dan Kenigsberg <dan...@redhat.com>
>>>> wrote:
>>>>
>>>> On Tue, May 29, 2018 at 1:21 PM, Elad Ben Aharon <
ebena...@redhat.com>
>>>>> wrote:
>>>>> > Hi Dan,
>>>>> >
>>>>> > In the last execution, the success rate was very low due to a
large
>>>>> number
>>>>> > of failures on start VM caused, according to Michal, by the
>>>>> > vdsm-hook-allocate_net that was installed on the host.
>>>>> >
>>>>> > This is the latest status here, would you like me to re-execute?
>>>>>
>>>>> yes, of course. but you should rebase Polednik's code on top of
>>>>> *current* ovirt-4.2.3 branch.
>>>>>
>>>>> > If so, with
>>>>> > or W/O vdsm-hook-allocate_net installed?
>>>>>
>>>>> There was NO reason to have that installed. Please keep it (and any
>>>>> other needless code) out of the test environment.
>>>>>
>>>>> >
>>>>> > On Tue, May 29, 2018 at 1:14 PM, Dan Kenigsberg <
dan...@redhat.com>
>>>>> wrote:
>>>>> >>
>>>>> >> On Mon, May 7, 2018 at 3:53 PM, Michal Skrivanek
>>>>> >> <michal.skriva...@redhat.com> wrote:
>>>>> >> > Hi Elad,
>>>>> >> > why did you install vdsm-hook-allocate_net?
>>>>> >> >
>>>>> >> > adding Dan as I think the hook is not supposed to fail this
badly
>>>>> in
>>>>> any
>>>>> >> > case
>>>>> >>
>>>>> >> yep, this looks bad and deserves a little bug report. Installing
this
>>>>> >> little hook should not block vm startup.
>>>>> >>
>>>>> >> But more importantly - what is the conclusion of this thread? Do
we
>>>>> >> have a green light from QE to take this in?
>>>>> >>
>>>>> >>
>>>>> >> >
>>>>> >> > Thanks,
>>>>> >> > michal
>>>>> >> >
>>>>> >> > On 5 May 2018, at 19:22, Elad Ben Aharon <ebena...@redhat.com>
>>>>> wrote:
>>>>> >> >
>>>>> >> > Start VM fails on:
>>>>> >> >
>>>>> >> > 2018-05-05 17:53:27,399+0300 INFO (vm/e6ce66ce) [virt.vm]
>>>>> >> > (vmId='e6ce66ce-852f-48c5-9997-5d2959432a27') drive 'vda'
path:
>>>>> >> >
>>>>> >> > 'dev=/rhev/data-center/mnt/blockSD/db5a6696-d907-4938-
>>>>> 9a78-bdd13a843c62/images/6cdabfe5-
>>>>> >> > d1ca-40af-ae63-9834f235d1c8/7ef97445-30e6-4435-8425-f35a0192
8211'
>>>>> ->
>>>>> >> >
>>>>> >> > u'*dev=/rhev/data-center/mnt/blockSD/db5a6696-d907-4938-
>>>>> 9a78-bdd13a843c62/images/6cdabfe5-d1ca-40af-ae63-
>>>>> 9834f235d1c8/7ef97445-30e6-4435-8425-
>>>>> >> > f35a01928211' (storagexml:334)
>>>>> >> > 2018-05-05 17:53:27,888+0300 INFO (jsonrpc/1) [vdsm.api] START
>>>>> >> > getSpmStatus(spUUID='940fe6f3-b0c6-4d0c-a921-198e7819c1cc',
>>>>> >> > options=None)
>>>>> >> > from=::ffff:10.35.161.127,53512,
>>>>> >> > task_id=c70ace39-dbfe-4f5c-ae49-a1e3a82c
>>>>> >> > 2758 (api:46)
>>>>> >> > 2018-05-05 17:53:27,909+0300 INFO (vm/e6ce66ce) [root]
>>>>> >> > /usr/libexec/vdsm/hooks/before_device_create/10_allocate_net:
rc=2
>>>>> >> > err=vm
>>>>> >> > net allocation hook: [unexpected error]: Traceback (most recent
>>>>> call
>>>>> >> > last):
>>>>> >> > File "/usr/libexec/vdsm/hooks/befor
e_device_create/10_allocate_ne
>>>>> t",
>>>>> >> > line
>>>>> >> > 105, in <module>
>>>>> >> > main()
>>>>> >> > File "/usr/libexec/vdsm/hooks/befor
e_device_create/10_allocate_ne
>>>>> t",
>>>>> >> > line
>>>>> >> > 93, in main
>>>>> >> > allocate_random_network(device_xml)
>>>>> >> > File "/usr/libexec/vdsm/hooks/befor
e_device_create/10_allocate_ne
>>>>> t",
>>>>> >> > line
>>>>> >> > 62, in allocate_random_network
>>>>> >> > net = _get_random_network()
>>>>> >> > File "/usr/libexec/vdsm/hooks/befor
e_device_create/10_allocate_ne
>>>>> t",
>>>>> >> > line
>>>>> >> > 50, in _get_random_network
>>>>> >> > available_nets = _parse_nets()
>>>>> >> > File "/usr/libexec/vdsm/hooks/befor
e_device_create/10_allocate_ne
>>>>> t",
>>>>> >> > line
>>>>> >> > 46, in _parse_nets
>>>>> >> > return [net for net in os.environ[AVAIL_NETS_KEY].split()]
>>>>> >> > File "/usr/lib64/python2.7/UserDict.py", line 23, in
__getitem__
>>>>> >> > raise KeyError(key)
>>>>> >> > KeyError: 'equivnets'
>>>>> >> >
>>>>> >> >
>>>>> >> > (hooks:110)
>>>>> >> > 2018-05-05 17:53:27,915+0300 ERROR (vm/e6ce66ce) [virt.vm]
>>>>> >> > (vmId='e6ce66ce-852f-48c5-9997-5d2959432a27') The vm start
process
>>>>> >> > failed
>>>>> >> > (vm:943)
>>>>> >> > Traceback (most recent call last):
>>>>> >> > File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line
>>>>> 872,
>>>>> in
>>>>> >> > _startUnderlyingVm
>>>>> >> > self._run()
>>>>> >> > File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line
>>>>> 2861,
>>>>> in
>>>>> >> > _run
>>>>> >> > domxml = hooks.before_vm_start(self._buildDomainXML(),
>>>>> >> > File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line
>>>>> 2254,
>>>>> in
>>>>> >> > _buildDomainXML
>>>>> >> > dom, self.id, self._custom['custom'])
>>>>> >> > File "/usr/lib/python2.7/site-packages/vdsm/virt/domxml_
>>>>> preprocess.py",
>>>>> >> > line 240, in replace_device_xml_with_hooks_xml
>>>>> >> > dev_custom)
>>>>> >> > File "/usr/lib/python2.7/site-packages/vdsm/common/hooks.py",
>>>>> line
>>>>> 134,
>>>>> >> > in
>>>>> >> > before_device_create
>>>>> >> > params=customProperties)
>>>>> >> > File "/usr/lib/python2.7/site-packages/vdsm/common/hooks.py",
>>>>> line
>>>>> 120,
>>>>> >> > in
>>>>> >> > _runHooksDir
>>>>> >> > raise exception.HookError(err)
>>>>> >> > HookError: Hook Error: ('vm net allocation hook: [unexpected
>>>>> error]:
>>>>> >> > Traceback (most recent call last):\n File
>>>>> >> > "/usr/libexec/vdsm/hooks/before_device_create/10_allocate_
net",
>>>>> line
>>>>> >> > 105, in
>>>>> >> > <module>\n main()\n
>>>>> >> > File "/usr/libexec/vdsm/hooks/befor
e_device_create/10_allocate_ne
>>>>> t",
>>>>> >> > line
>>>>> >> > 93, in main\n allocate_random_network(device_xml)\n File
>>>>> >> > "/usr/libexec/vdsm/hooks/before_device_create/10_allocate_
net",
>>>>> line
>>>>> 62,
>>>>> >> > i
>>>>> >> > n allocate_random_network\n net = _get_random_network()\n
File
>>>>> >> > "/usr/libexec/vdsm/hooks/before_device_create/10_allocate_
net",
>>>>> line
>>>>> 50,
>>>>> >> > in
>>>>> >> > _get_random_network\n available_nets = _parse_nets()\n File
>>>>> "/us
>>>>> >> > r/libexec/vdsm/hooks/before_device_create/10_allocate_net",
line
>>>>> 46,
>>>>> in
>>>>> >> > _parse_nets\n return [net for net in
>>>>> >> > os.environ[AVAIL_NETS_KEY].split()]\n File
>>>>> >> > "/usr/lib64/python2.7/UserDict.py", line 23, in __getit
>>>>> >> > em__\n raise KeyError(key)\nKeyError: \'equivnets\'\n\n\n',)
>>>>> >> >
>>>>> >> >
>>>>> >> >
>>>>> >> > Hence, the success rate was 28% against 100% running with d/s
>>>>> (d/s).
>>>>> If
>>>>> >> > needed, I'll compare against the latest master, but I think
you get
>>>>> the
>>>>> >> > picture with d/s.
>>>>> >> >
>>>>> >> > vdsm-4.20.27-3.gitfee7810.el7.centos.x86_64
>>>>> >> > libvirt-3.9.0-14.el7_5.3.x86_64
>>>>> >> > qemu-kvm-rhev-2.10.0-21.el7_5.2.x86_64
>>>>> >> > kernel 3.10.0-862.el7.x86_64
>>>>> >> > rhel7.5
>>>>> >> >
>>>>> >> >
>>>>> >> > Logs attached
>>>>> >> >
>>>>> >> > On Sat, May 5, 2018 at 1:26 PM, Elad Ben Aharon <
>>>>> ebena...@redhat.com>
>>>>> >> > wrote:
>>>>> >> >>
>>>>> >> >> nvm, found gluster 3.12 repo, managed to install vdsm
>>>>> >> >>
>>>>> >> >> On Sat, May 5, 2018 at 1:12 PM, Elad Ben Aharon <
>>>>> ebena...@redhat.com
>>>>> >
>>>>> >> >> wrote:
>>>>> >> >>>
>>>>> >> >>> No, vdsm requires it:
>>>>> >> >>>
>>>>> >> >>> Error: Package: vdsm-4.20.27-3.gitfee7810.el7.centos.x86_64
>>>>> >> >>> (/vdsm-4.20.27-3.gitfee7810.el7.centos.x86_64)
>>>>> >> >>> Requires: glusterfs-fuse >= 3.12
>>>>> >> >>> Installed: glusterfs-fuse-3.8.4-54.8.el7.x86_64
>>>>> (@rhv-4.2.3)
>>>>> >> >>>
>>>>> >> >>> Therefore, vdsm package installation is skipped upon force
>>>>> install.
>>>>> >> >>>
>>>>> >> >>> On Sat, May 5, 2018 at 11:42 AM, Michal Skrivanek
>>>>> >> >>> <michal.skriva...@redhat.com> wrote:
>>>>> >> >>>>
>>>>> >> >>>>
>>>>> >> >>>>
>>>>> >> >>>> On 5 May 2018, at 00:38, Elad Ben Aharon <
ebena...@redhat.com>
>>>>> wrote:
>>>>> >> >>>>
>>>>> >> >>>> Hi guys,
>>>>> >> >>>>
>>>>> >> >>>> The vdsm build from the patch requires glusterfs-fuse >
3.12.
>>>>> This
>>>>> is
>>>>> >> >>>> while the latest 4.2.3-5 d/s build requires 3.8.4
>>>>> (3.4.0.59rhs-1.el7)
>>>>> >> >>>>
>>>>> >> >>>>
>>>>> >> >>>> because it is still oVirt, not a downstream build. We can’t
>>>>> really
>>>>> do
>>>>> >> >>>> downstream builds with unmerged changes:/
>>>>> >> >>>>
>>>>> >> >>>> Trying to get this gluster-fuse build, so far no luck.
>>>>> >> >>>> Is this requirement intentional?
>>>>> >> >>>>
>>>>> >> >>>>
>>>>> >> >>>> it should work regardless, I guess you can force install it
>>>>> without
>>>>> >> >>>> the
>>>>> >> >>>> dependency
>>>>> >> >>>>
>>>>> >> >>>>
>>>>> >> >>>> On Fri, May 4, 2018 at 2:38 PM, Michal Skrivanek
>>>>> >> >>>> <michal.skriva...@redhat.com> wrote:
>>>>> >> >>>>>
>>>>> >> >>>>> Hi Elad,
>>>>> >> >>>>> to make it easier to compare, Martin backported the change
to
>>>>> 4.2
>>>>> so
>>>>> >> >>>>> it
>>>>> >> >>>>> is actually comparable with a run without that patch.
Would you
>>>>> >> >>>>> please try
>>>>> >> >>>>> that out?
>>>>> >> >>>>> It would be best to have 4.2 upstream and this[1] run to
really
>>>>> >> >>>>> minimize the noise.
>>>>> >> >>>>>
>>>>> >> >>>>> Thanks,
>>>>> >> >>>>> michal
>>>>> >> >>>>>
>>>>> >> >>>>> [1]
>>>>> >> >>>>>
>>>>> >> >>>>> http://jenkins.ovirt.org/job/vdsm_4.2_build-artifacts-on-
>>>>> demand-el7-x86_64/28/
>>>>> >> >>>>>
>>>>> >> >>>>> On 27 Apr 2018, at 09:23, Martin Polednik <
>>>>> mpoled...@redhat.com>
>>>>> >> >>>>> wrote:
>>>>> >> >>>>>
>>>>> >> >>>>> On 24/04/18 00:37 +0300, Elad Ben Aharon wrote:
>>>>> >> >>>>>
>>>>> >> >>>>> I will update with the results of the next tier1 execution
on
>>>>> latest
>>>>> >> >>>>> 4.2.3
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> That isn't master but old branch though. Could you run it
>>>>> against
>>>>> >> >>>>> *current* VDSM master?
>>>>> >> >>>>>
>>>>> >> >>>>> On Mon, Apr 23, 2018 at 3:56 PM, Martin Polednik
>>>>> >> >>>>> <mpoled...@redhat.com>
>>>>> >> >>>>> wrote:
>>>>> >> >>>>>
>>>>> >> >>>>> On 23/04/18 01:23 +0300, Elad Ben Aharon wrote:
>>>>> >> >>>>>
>>>>> >> >>>>> Hi, I've triggered another execution [1] due to some
issues I
>>>>> saw
>>>>> in
>>>>> >> >>>>> the
>>>>> >> >>>>> first which are not related to the patch.
>>>>> >> >>>>>
>>>>> >> >>>>> The success rate is 78% which is low comparing to tier1
>>>>> executions
>>>>> >> >>>>> with
>>>>> >> >>>>> code from downstream builds (95-100% success rates) [2].
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> Could you run the current master (without the
dynamic_ownership
>>>>> >> >>>>> patch)
>>>>> >> >>>>> so that we have viable comparision?
>>>>> >> >>>>>
>>>>> >> >>>>> From what I could see so far, there is an issue with move
and
>>>>> copy
>>>>> >> >>>>>
>>>>> >> >>>>> operations to and from Gluster domains. For example [3].
>>>>> >> >>>>>
>>>>> >> >>>>> The logs are attached.
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> [1]
>>>>> >> >>>>> *https://rhv-jenkins.rhev-ci-v
ms.eng.rdu2.redhat.com/job/rhv
>>>>> >> >>>>> -4.2-ge-runner-tier1-after-upgrade/7/testReport/
>>>>> >> >>>>> <https://rhv-jenkins.rhev-ci-v
ms.eng.rdu2.redhat.com/job/rhv
>>>>> >> >>>>> -4.2-ge-runner-tier1-after-upgrade/7/testReport/>*
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> [2]
>>>>> >> >>>>> https://rhv-jenkins.rhev-ci-vms.eng.rdu2.redhat.com/job/
>>>>> >> >>>>>
>>>>> >> >>>>> rhv-4.2-ge-runner-tier1-after-upgrade/7/
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> [3]
>>>>> >> >>>>> 2018-04-22 13:06:28,316+0300 INFO (jsonrpc/7) [vdsm.api]
>>>>> FINISH
>>>>> >> >>>>> deleteImage error=Image does not exist in domain:
>>>>> >> >>>>> 'image=cabb8846-7a4b-4244-9835-5f603e682f33,
>>>>> >> >>>>> domain=e5fd29c8-52ba-467e-be09-ca40ff054dd4'
>>>>> >> >>>>> from=:
>>>>> >> >>>>> :ffff:10.35.161.182,40936,
>>>>> >> >>>>> flow_id=disks_syncAction_ba6b2630-5976-4935,
>>>>> >> >>>>> task_id=3d5f2a8a-881c-409e-93e9-aaa643c10e42 (api:51)
>>>>> >> >>>>> 2018-04-22 13:06:28,317+0300 ERROR (jsonrpc/7)
>>>>> >> >>>>> [storage.TaskManager.Task]
>>>>> >> >>>>> (Task='3d5f2a8a-881c-409e-93e9-aaa643c10e42') Unexpected
error
>>>>> >> >>>>> (task:875)
>>>>> >> >>>>> Traceback (most recent call last):
>>>>> >> >>>>> File "/usr/lib/python2.7/site-packa
ges/vdsm/storage/task.py",
>>>>> line
>>>>> >> >>>>> 882,
>>>>> >> >>>>> in
>>>>> >> >>>>> _run
>>>>> >> >>>>> return fn(*args, **kargs)
>>>>> >> >>>>> File "<string>", line 2, in deleteImage
>>>>> >> >>>>> File "/usr/lib/python2.7/site-packa
ges/vdsm/common/api.py",
>>>>> line
>>>>> 49,
>>>>> >> >>>>> in
>>>>> >> >>>>> method
>>>>> >> >>>>> ret = func(*args, **kwargs)
>>>>> >> >>>>> File "/usr/lib/python2.7/site-packa
ges/vdsm/storage/hsm.py",
>>>>> line
>>>>> >> >>>>> 1503,
>>>>> >> >>>>> in
>>>>> >> >>>>> deleteImage
>>>>> >> >>>>> raise se.ImageDoesNotExistInSD(imgUUID, sdUUID)
>>>>> >> >>>>> ImageDoesNotExistInSD: Image does not exist in domain:
>>>>> >> >>>>> 'image=cabb8846-7a4b-4244-9835-5f603e682f33,
>>>>> >> >>>>> domain=e5fd29c8-52ba-467e-be09-ca40ff054dd4'
>>>>> >> >>>>>
>>>>> >> >>>>> 2018-04-22 13:06:28,317+0300 INFO (jsonrpc/7)
>>>>> >> >>>>> [storage.TaskManager.Task]
>>>>> >> >>>>> (Task='3d5f2a8a-881c-409e-93e9-aaa643c10e42') aborting:
Task
>>>>> is
>>>>> >> >>>>> aborted:
>>>>> >> >>>>> "Image does not exist in domain:
'image=cabb8846-7a4b-4244-9835
>>>>> -
>>>>> >> >>>>> 5f603e682f33, domain=e5fd29c8-52ba-467e-be09-ca40ff054dd4'"
-
>>>>> code
>>>>> >> >>>>> 268
>>>>> >> >>>>> (task:1181)
>>>>> >> >>>>> 2018-04-22 13:06:28,318+0300 ERROR (jsonrpc/7)
>>>>> [storage.Dispatcher]
>>>>> >> >>>>> FINISH
>>>>> >> >>>>> deleteImage error=Image does not exist in domain:
>>>>> >> >>>>> 'image=cabb8846-7a4b-4244-9835-5f603e682f33,
>>>>> >> >>>>> domain=e5fd29c8-52ba-467e-be09
>>>>> >> >>>>> -ca40ff054d
>>>>> >> >>>>> d4' (dispatcher:82)
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> On Thu, Apr 19, 2018 at 5:34 PM, Elad Ben Aharon
>>>>> >> >>>>> <ebena...@redhat.com>
>>>>> >> >>>>> wrote:
>>>>> >> >>>>>
>>>>> >> >>>>> Triggered a sanity tier1 execution [1] using [2], which
covers
>>>>> all
>>>>> >> >>>>> the
>>>>> >> >>>>>
>>>>> >> >>>>> requested areas, on iSCSI, NFS and Gluster.
>>>>> >> >>>>> I'll update with the results.
>>>>> >> >>>>>
>>>>> >> >>>>> [1]
>>>>> >> >>>>> https://rhv-jenkins.rhev-ci-vm
s.eng.rdu2.redhat.com/view/4.2
>>>>> >> >>>>> _dev/job/rhv-4.2-ge-flow-storage/1161/
>>>>> >> >>>>>
>>>>> >> >>>>> [2]
>>>>> >> >>>>> https://gerrit.ovirt.org/#/c/89830/
>>>>> >> >>>>> vdsm-4.30.0-291.git77aef9a.el7.x86_64
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> On Thu, Apr 19, 2018 at 3:07 PM, Martin Polednik
>>>>> >> >>>>> <mpoled...@redhat.com>
>>>>> >> >>>>> wrote:
>>>>> >> >>>>>
>>>>> >> >>>>> On 19/04/18 14:54 +0300, Elad Ben Aharon wrote:
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> Hi Martin,
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> I see [1] requires a rebase, can you please take care?
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> Should be rebased.
>>>>> >> >>>>>
>>>>> >> >>>>> At the moment, our automation is stable only on iSCSI, NFS,
>>>>> Gluster
>>>>> >> >>>>> and
>>>>> >> >>>>>
>>>>> >> >>>>> FC.
>>>>> >> >>>>> Ceph is not supported and Cinder will be stabilized soon,
>>>>> AFAIR,
>>>>> >> >>>>> it's
>>>>> >> >>>>> not
>>>>> >> >>>>> stable enough at the moment.
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> That is still pretty good.
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> [1] https://gerrit.ovirt.org/#/c/89830/
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> Thanks
>>>>> >> >>>>>
>>>>> >> >>>>> On Wed, Apr 18, 2018 at 2:17 PM, Martin Polednik
>>>>> >> >>>>> <mpoled...@redhat.com
>>>>> >> >>>>> >
>>>>> >> >>>>> wrote:
>>>>> >> >>>>>
>>>>> >> >>>>> On 18/04/18 11:37 +0300, Elad Ben Aharon wrote:
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> Hi, sorry if I misunderstood, I waited for more input
regarding
>>>>> what
>>>>> >> >>>>>
>>>>> >> >>>>> areas
>>>>> >> >>>>> have to be tested here.
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> I'd say that you have quite a bit of freedom in this
regard.
>>>>> >> >>>>>
>>>>> >> >>>>> GlusterFS
>>>>> >> >>>>> should be covered by Dennis, so iSCSI/NFS/ceph/cinder with
some
>>>>> >> >>>>> suite
>>>>> >> >>>>> that covers basic operations (start & stop VM, migrate it),
>>>>> >> >>>>> snapshots
>>>>> >> >>>>> and merging them, and whatever else would be important for
>>>>> storage
>>>>> >> >>>>> sanity.
>>>>> >> >>>>>
>>>>> >> >>>>> mpolednik
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> On Wed, Apr 18, 2018 at 11:16 AM, Martin Polednik <
>>>>> >> >>>>> mpoled...@redhat.com
>>>>> >> >>>>> >
>>>>> >> >>>>>
>>>>> >> >>>>> wrote:
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> On 11/04/18 16:52 +0300, Elad Ben Aharon wrote:
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> We can test this on iSCSI, NFS and GlusterFS. As for ceph
and
>>>>> >> >>>>> cinder,
>>>>> >> >>>>>
>>>>> >> >>>>> will
>>>>> >> >>>>>
>>>>> >> >>>>> have to check, since usually, we don't execute our
automation
>>>>> on
>>>>> >> >>>>> them.
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> Any update on this? I believe the gluster tests were
>>>>> successful,
>>>>> >> >>>>> OST
>>>>> >> >>>>>
>>>>> >> >>>>> passes fine and unit tests pass fine, that makes the
storage
>>>>> >> >>>>> backends
>>>>> >> >>>>> test the last required piece.
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> On Wed, Apr 11, 2018 at 4:38 PM, Raz Tamir <
rata...@redhat.com
>>>>> >
>>>>> >> >>>>> wrote:
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> +Elad
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> On Wed, Apr 11, 2018 at 4:28 PM, Dan Kenigsberg <
>>>>> dan...@redhat.com
>>>>> >> >>>>>
>>>>> >> >>>>> >
>>>>> >> >>>>> wrote:
>>>>> >> >>>>>
>>>>> >> >>>>> On Wed, Apr 11, 2018 at 12:34 PM, Nir Soffer <
>>>>> nsof...@redhat.com>
>>>>> >> >>>>> wrote:
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> On Wed, Apr 11, 2018 at 12:31 PM Eyal Edri <
ee...@redhat.com>
>>>>> >> >>>>>
>>>>> >> >>>>> wrote:
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> Please make sure to run as much OST suites on this patch as
>>>>> >> >>>>>
>>>>> >> >>>>> possible
>>>>> >> >>>>>
>>>>> >> >>>>> before merging ( using 'ci please build' )
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> But note that OST is not a way to verify the patch.
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> Such changes require testing with all storage types we
support.
>>>>> >> >>>>>
>>>>> >> >>>>> Nir
>>>>> >> >>>>>
>>>>> >> >>>>> On Tue, Apr 10, 2018 at 4:09 PM, Martin Polednik <
>>>>> >> >>>>> mpoled...@redhat.com
>>>>> >> >>>>> >
>>>>> >> >>>>>
>>>>> >> >>>>> wrote:
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> Hey,
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> I've created a patch[0] that is finally able to activate
>>>>> >> >>>>>
>>>>> >> >>>>> libvirt's
>>>>> >> >>>>> dynamic_ownership for VDSM while not negatively affecting
>>>>> >> >>>>> functionality of our storage code.
>>>>> >> >>>>>
>>>>> >> >>>>> That of course comes with quite a bit of code removal,
mostly
>>>>> >> >>>>> in
>>>>> >> >>>>> the
>>>>> >> >>>>> area of host devices, hwrng and anything that touches
devices;
>>>>> >> >>>>> bunch
>>>>> >> >>>>> of test changes and one XML generation caveat (storage is
>>>>> >> >>>>> handled
>>>>> >> >>>>> by
>>>>> >> >>>>> VDSM, therefore disk relabelling needs to be disabled on
the
>>>>> >> >>>>> VDSM
>>>>> >> >>>>> level).
>>>>> >> >>>>>
>>>>> >> >>>>> Because of the scope of the patch, I welcome
>>>>> >> >>>>> storage/virt/network
>>>>> >> >>>>> people to review the code and consider the implication this
>>>>> >> >>>>> change
>>>>> >> >>>>> has
>>>>> >> >>>>> on current/future features.
>>>>> >> >>>>>
>>>>> >> >>>>> [0] https://gerrit.ovirt.org/#/c/89830/
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> In particular: dynamic_ownership was set to 0
prehistorically
>>>>> >> >>>>> (as
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> part
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> of https://bugzilla.redhat.com/show_bug.cgi?id=554961 )
>>>>> because
>>>>> >> >>>>>
>>>>> >> >>>>> libvirt,
>>>>> >> >>>>> running as root, was not able to play properly with
root-squash
>>>>> >> >>>>> nfs
>>>>> >> >>>>> mounts.
>>>>> >> >>>>>
>>>>> >> >>>>> Have you attempted this use case?
>>>>> >> >>>>>
>>>>> >> >>>>> I join to Nir's request to run this with storage QE.
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> --
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> Raz Tamir
>>>>> >> >>>>> Manager, RHV QE
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>> _______________________________________________
>>>>> >> >>>>> Devel mailing list
>>>>> >> >>>>> Devel@ovirt.org
>>>>> >> >>>>> http://lists.ovirt.org/mailman/listinfo/devel
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>>
>>>>> >> >>>>
>>>>> >> >>>>
>>>>> >> >>>
>>>>> >> >>
>>>>> >> >
>>>>> >> > <logs.tar.gz>
>>>>> >> >
>>>>> >> >
>>>>> >
>>>>> >
>>>>>
>>>>>
>>
_______________________________________________
Devel mailing list -- devel@ovirt.org
To unsubscribe send an email to devel-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/communit
y/about/community-guidelines/
List Archives: https://lists.ovirt.org/archiv
es/list/devel@ovirt.org/message/WGMUK5T7PDYSIBIUZE3AJIYQAWJOILTC/