Thanks, Benny! When I try to do that, I get
2020-04-01 12:14:49,346+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-6) [eaddc8ee-a015-4093-a488-64384362141b] Unexpected return value: Status [code=-32603, message=Internal JSON-RPC error: {'reason': "type object 'LinuxBridge' has no attribute 'STP'"}] 2020-04-01 12:14:49,346+02 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-6) [eaddc8ee-a015-4093-a488-64384362141b] Failed in 'HostSetupNetworksVDS' method in the logs. I wonder if something is wrong with my FC30 host setup then... Fedor ----- Original Message ----- From: "Benny Zlotnik" <bzlot...@redhat.com> To: "Fedor Gavrilov" <fgavr...@redhat.com> Cc: "Liran Rotenberg" <lrote...@redhat.com>, "Dana Elfassy" <delfa...@redhat.com>, "devel" <devel@ovirt.org> Sent: Tuesday, March 31, 2020 5:40:06 PM Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package? usually means you don't have the ovirtmgmt bridge on the host, going to host -> network interfaces -> setup host networks should set it up for you On Tue, Mar 31, 2020 at 6:12 PM Fedor Gavrilov <fgavr...@redhat.com> wrote: > > Ok, after doing setup again I was able to get past ansible runner problem as > it seems. Not sure what the difference is other than the fact that I install > ovirt-master repo first and thus some dependencies are likely to come from > there instead of standard fedora 30 repo. > There seems to be one last thing, though: > > 2020-03-31 16:00:01,430+02 ERROR > [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] > (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-34) > [3b59703c] Host 'banana' is set to Non-Operational, it is missing the > following networks: 'ovirtmgmt' > 2020-03-31 16:00:01,474+02 WARN > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-34) > [3b59703c] EVENT_ID: VDS_SET_NONOPERATIONAL_NETWORK(519), Host banana does > not comply with the cluster Default networks, the following networks are > missing on host: 'ovirtmgmt' > > I'm sure I've seen such error some time ago, but can't remember what it might > mean... > > Thanks, > Fedor > > ----- Original Message ----- > From: "Liran Rotenberg" <lrote...@redhat.com> > To: "Eyal Shenitzky" <eshen...@redhat.com> > Cc: "Fedor Gavrilov" <fgavr...@redhat.com>, "Nir Soffer" > <nsof...@redhat.com>, "Dana Elfassy" <delfa...@redhat.com>, "devel" > <devel@ovirt.org> > Sent: Monday, March 23, 2020 10:35:49 AM > Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev > package? > > On Mon, Mar 23, 2020 at 11:29 AM Eyal Shenitzky <eshen...@redhat.com> wrote: > > > I encounter that problem when I didn't configure my ansible runner as > > needed > > > > > > Please check that your conf file (/etc/ansible-runner-service/config.yaml) > > is as follow: > > > > --- > > > > > > > > > > > > *version: 1 playbooks_root_dir: > > '/full/path/to/your/dev/engine/ovirt-engine/share/ovirt-engine/ansible-runner-service-project' > > ssh_private_key: > > '/full/path/to/your/dev/engine/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa' > > port: 50001 target_user: root* > > > If it still doesn't work try doing what I suggested with the breakpoint as > a workaround. > > > > > > > > > On Fri, 20 Mar 2020 at 16:48, Fedor Gavrilov <fgavr...@redhat.com> wrote: > > > >> I just tried installing fedora 30 host with no pre-installed cockpit, > >> just ovirt-release-master repo. Same as always: > >> > >> 2020-03-20 14:01:30,134+01 ERROR > >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > >> (EE-ManagedThreadFactory-engine-Thread-1) [4029908e] EVENT_ID: > >> VDS_INSTALL_FAILED(505), Host banana installation failed. Failed to execute > >> Ansible host-deploy role: Internal server error, please check Ansible > >> runner error log.. Please check logs for more details: > >> /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200320140129-banana-4029908e.log. > >> > >> No logs as usual. The error must be on the engine side somewhere... > >> > >> ----- Original Message ----- > >> From: "Fedor Gavrilov" <fgavr...@redhat.com> > >> To: "Nir Soffer" <nsof...@redhat.com> > >> Cc: "Liran Rotenberg" <lrote...@redhat.com>, "Dana Elfassy" < > >> delfa...@redhat.com>, "devel" <devel@ovirt.org> > >> Sent: Thursday, March 19, 2020 4:20:23 PM > >> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev > >> package? > >> > >> Thanks for the response, Nir. > >> > >> >You host installed without SSH server enabled? > >> I've been virtualizing both engine and host vm since I joined the team, > >> so enabling ssh access is the first thing I do after OS is installed. > >> > >> >Not sure why you need cockpit. > >> >But you need: > >> >sudo dnf install > >> >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > >> > >> I did install ovirt-release-master rpm on the host and somehow managed to > >> not copy that (facepalm). But believe me it's there. > >> Regarding cockpit, I was following what's written in > >> https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts.html > >> > >> >Why not: > >> >sudo yum install > >> >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > >> > >> Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it > >> would silently fail when you try installing from the URL :D > >> > >> >Did you to add centos 7.7 host? 8.1? > >> Yesterday I tried Fedoa 30 host and just now I tried CentOS 8 host > >> (that's the lengths I went to get this thing working!). Both fail. > >> > >> >Look at the full half of the glass, you have engine. > >> Nice one. Though I'm afraid that part might be poisoned since host > >> configuration that worked for me for a year now instantly fails no matter > >> what OS is used... > >> > >> Fedor > >> > >> ----- Original Message ----- > >> From: "Nir Soffer" <nsof...@redhat.com> > >> To: "Fedor Gavrilov" <fgavr...@redhat.com> > >> Cc: "Martin Perina" <mper...@redhat.com>, "Liran Rotenberg" < > >> lrote...@redhat.com>, "Dana Elfassy" <delfa...@redhat.com>, "devel" < > >> devel@ovirt.org> > >> Sent: Thursday, March 19, 2020 2:31:39 AM > >> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev > >> package? > >> > >> On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavr...@redhat.com> > >> wrote: > >> > > >> > Wow. I did not expect that, but after clean setup the error is still > >> there. > >> > I can't add fedora 30 host to fedora 30 engine. > >> > > >> > Here is a full bash history for the host machine since OS was installed: > >> > > >> > sudo yum update > >> > >> Good > >> > >> > sudo systemctl enable sshd > >> > >> You host installed without SSH server enabled? > >> > >> > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24 > >> > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1 > >> > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1 > >> > sudo nmcli connection mod ens3 ipv4.method manual > >> > >> You can configure the network from the installer, less painful. > >> > >> > sudo vi /etc/hosts > >> > sudo poweroff > >> > sudo yum install cockpit-ovirt-dashboard > >> > sudo systemctl enable cockpit.socket --now > >> > >> Not sure why you need cockpit. > >> > >> But you need: > >> > >> sudo dnf install > >> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > >> > >> > > >> > Same for the engine machine (I was installing dependencies separetely > >> because 1. yum bugs & 2. I was checking if versions are correct one by > >> one): > >> > > >> > sudo yum update > >> > sudo systemctl enable sshd > >> > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.2/24 > >> > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1 > >> > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1 > >> > sudo nmcli connection mod ens3 ipv4.method manual > >> > sudo vi /etc/hosts > >> > sudo poweroff > >> > sudo yum install java-11-openjdk-devel > >> > sudo yum install java-1.8.0-openjdk-headless > >> > sudo yum install mailcap > >> > sudo yum install unzip > >> > sudo yum install openssl > >> > sudo yum install bind-utils > >> > sudo yum install postgresql-server > >> > sudo yum install postgresql > >> > sudo yum install postgresql-contrib > >> > sudo yum install python2-dateutil > >> > sudo yum install python3-dateutil > >> > sudo yum install python2-m2crypto > >> > sudo yum install python3-m2crypto > >> > sudo yum install python2-psycopg2 > >> > sudo yum install python3-psycopg2 > >> > sudo yum install python2-jinja2 > >> > sudo yum install python3-jinja2 > >> > sudo yum install python2-libxml2 > >> > sudo yum install python3-libxml2 > >> > sudo yum install python2-daemon > >> > sudo yum install python3-daemon > >> > >> > wget https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > >> > sudo yum install ./ovirt-release-master.rpm -y > >> > >> Why not: > >> > >> sudo yum install > >> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > >> > >> Also, you want to instal this first - before you install other > >> packages, so you get packages > >> from ovirt dependencies. > >> > >> > sudo yum install otopi > >> > sudo yum install python3-ovirt-setup-lib > >> > sudo yum install maven > >> > sudo yum install ansible > >> > sudo yum install ansible-runner-service-dev > >> > sudo yum install ovirt-ansible-roles > >> > sudo yum install ovirt-engine-metrics > >> > sudo yum install python3-ovirt-engine-sdk4 > >> > sudo yum install pyflakes > >> > sudo yum install python-pep8 > >> > sudo yum install python3-docker > >> > sudo yum install python3-isort > >> > sudo yum install gcc > >> > sudo yum install python2-devel > >> > sudo yum install systemd-python > >> > sudo yum install python-webob > >> > sudo yum install redhat-rpm-config > >> > sudo yum install scl-utils > >> > sudo yum install ovirt-imageio-common > >> > >> Not needed, the ovirt-imageio-proxy will bring it. > >> > >> > sudo yum install make > >> > sudo yum install python-requests > >> > sudo yum install python-subprocess32 > >> > sudo alternatives --config java > >> > sudo yum install ovirt-engine-wildfly > >> > sudo yum install ovirt-engine-wildfly-overlay > >> > sudo vi /etc/security/limits.d/10-nofile.conf > >> > sudo firewall-cmd --add-port=8080/tcp --permanent > >> > sudo firewall-cmd --add-port=8443/tcp --permanent > >> > sudo firewall-cmd --add-port=8787/tcp --permanent > >> > sudo firewall-cmd --add-port=5432/tcp --permanent > >> > sudo firewall-cmd --add-port=54323/tcp --permanent > >> > sudo firewall-cmd --reload > >> > sudo postgresql-setup --initdb --unit postgresql > >> > sudo vi /var/lib/pgsql/data/pg_hba.conf > >> > sudo vi /var/lib/pgsql/data/postgresql.conf > >> > sudo systemctl enable postgresql --now > >> > sudo systemctl status postgresql > >> > sudo su - postgres -c "psql -d template1" > >> > sudo su - postgres -c "psql -d engine" > >> > >> sudo -u postgres -i ? > >> > >> > sudo vi /etc/ansible-runner-service/config.yaml > >> > sudo systemctl enable ansible-runner-service --now > >> > sudo systemctl status ansible-runner-service > >> > sudo yum install git > >> > mkdir ~/git && cd ~/git > >> > git clone git://gerrit.ovirt.org/ovirt-imageio > >> > git clone git://gerrit.ovirt.org/ovirt-engine > >> > vi ~/.bashrc > >> > sudo reboot > >> > cd ovirt-engine/ > >> > make clean install-dev PREFIX="/home/apple/ovirt-engine" SKIP_CHECKS=1 > >> > cd ~/git/ovirt-imageio/ > >> > make > >> > cd proxy/ > >> > make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine > >> > ~/ovirt-engine/bin/engine-setup > >> > ~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323 > >> > vi ~/.bashrc > >> > vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf > >> > sudo poweroff > >> > > >> > I don't know what's wrong. It does not work. > >> > >> Look at the full half of the glass, you have engine. > >> > >> Did you to add centos 7.7 host? 8.1? > >> > >> > ----- Original Message ----- > >> > From: "Martin Perina" <mper...@redhat.com> > >> > To: "Fedor Gavrilov" <fgavr...@redhat.com> > >> > Cc: "Liran Rotenberg" <lrote...@redhat.com>, "Dana Elfassy" < > >> delfa...@redhat.com>, "devel" <devel@ovirt.org> > >> > Sent: Wednesday, March 18, 2020 3:15:15 PM > >> > Subject: Re: [ovirt-devel] Re: what's up with > >> ansible-runner-service-dev package? > >> > > >> > On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavr...@redhat.com> > >> wrote: > >> > > >> > > Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder > >> why I > >> > > haven't got this error sooner. > >> > > Also, given the workaround, does that mean that ansible-lint is > >> optional? > >> > > > >> > > >> > Yes, same as pep8, pyflake and other build check tools > >> > > >> > > > >> > > ----- Original Message ----- > >> > > From: "Liran Rotenberg" <lrote...@redhat.com> > >> > > To: "Fedor Gavrilov" <fgavr...@redhat.com> > >> > > Cc: "Dana Elfassy" <delfa...@redhat.com>, "devel" <devel@ovirt.org> > >> > > Sent: Wednesday, March 18, 2020 2:21:14 PM > >> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev > >> > > package? > >> > > > >> > > > >> > > > >> > > On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavr...@redhat.com > >> > > >> > > wrote: > >> > > > >> > > > >> > > Ok, thanks for the reaction :) > >> > > > >> > > Getting back to the main topic, can anyone (please) try to compile the > >> > > engine master now? > >> > > That's what I get when I try to: > >> > > > >> > > [602] Don't compare to empty string > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61 > >> > > > >> > > when: hosted_engine_vm_cluster_name_result.stdout | trim != "" > >> > > > >> > > [602] Don't compare to empty string > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67 > >> > > > >> > > when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or > >> > > hosted_engine_vm_cluster_name_result.stdout is undefined > >> > > > >> > > [403] Package installs should not use latest > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2 > >> > > > >> > > Task/Handler: Install collectd package > >> > > > >> > > [403] Package installs should not use latest > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9 > >> > > > >> > > Task/Handler: Install collectd plugins on engine > >> > > > >> > > [403] Package installs should not use latest > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19 > >> > > > >> > > Task/Handler: Install collectd plugins on hosts > >> > > > >> > > [403] Package installs should not use latest > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28 > >> > > > >> > > Task/Handler: Install collectd write_syslog plugin > >> > > > >> > > [303] systemctl used in place of systemd module > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14 > >> > > > >> > > Task/Handler: Check if fluentd is running > >> > > > >> > > [601] Don't compare to literal True/False > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34 > >> > > > >> > > - fluentd_is_running|default(false)|bool == true > >> > > > >> > > [601] Don't compare to literal True/False > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35 > >> > > > >> > > changed_when: fluentd_is_running|default(false)|bool == true > >> > > > >> > > [601] Don't compare to literal True/False > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45 > >> > > > >> > > - fluentd_is_running|default(false)|bool == true > >> > > > >> > > [601] Don't compare to literal True/False > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51 > >> > > > >> > > when: fluentd_is_running|default(false)|bool == false > >> > > > >> > > [303] systemctl used in place of systemd module > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60 > >> > > > >> > > Task/Handler: Check if rsyslog is running > >> > > > >> > > [601] Don't compare to literal True/False > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80 > >> > > > >> > > - rsyslog_is_running|default(false)|bool == true > >> > > > >> > > [601] Don't compare to literal True/False > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81 > >> > > > >> > > changed_when: rsyslog_is_running|default(false)|bool == true > >> > > > >> > > [601] Don't compare to literal True/False > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91 > >> > > > >> > > - rsyslog_is_running|default(false)|bool == true > >> > > > >> > > [601] Don't compare to literal True/False > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97 > >> > > > >> > > when: rsyslog_is_running|default(false)|bool == false > >> > > > >> > > [303] systemctl used in place of systemd module > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100 > >> > > > >> > > Task/Handler: Check if collectd is running > >> > > > >> > > [403] Package installs should not use latest > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2 > >> > > > >> > > Task/Handler: Install fluentd package > >> > > > >> > > [403] Package installs should not use latest > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9 > >> > > > >> > > Task/Handler: Install fluentd engine plugins > >> > > > >> > > [403] Package installs should not use latest > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19 > >> > > > >> > > Task/Handler: Install fluentd host plugins > >> > > > >> > > [601] Don't compare to literal True/False > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12 > >> > > > >> > > when: stat_result.stat.exists == True > >> > > > >> > > [301] Commands should not change things if nothing needs doing > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2 > >> > > > >> > > Task/Handler: Get ovirt_engine_fqdn > >> > > > >> > > [301] Commands should not change things if nothing needs doing > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13 > >> > > > >> > > Task/Handler: Get ovirt_engine_db_name > >> > > > >> > > [301] Commands should not change things if nothing needs doing > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22 > >> > > > >> > > Task/Handler: Get ovirt_engine_db_user > >> > > > >> > > [301] Commands should not change things if nothing needs doing > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31 > >> > > > >> > > Task/Handler: Get ovirt_engine_history_db_name > >> > > > >> > > [301] Commands should not change things if nothing needs doing > >> > > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40 > >> > > > >> > > Task/Handler: Get ovirt_engine_history_db_user > >> > > > >> > > make[1]: *** [Makefile:401: validations] Error 2 > >> > > make[1]: Leaving directory '/home/apple/git/ovirt-engine' > >> > > make: *** [Makefile:584: all-dev] Error 2 > >> > > > >> > > An extensive lecture from ansible, but what is this even about? > >> > > https://bugzilla.redhat.com/show_bug.cgi?id=1804268 > >> > > > >> > > > >> > > > >> > > ... > >> > > > >> > > > >> > > ----- Original Message ----- > >> > > From: "Nir Soffer" < nsof...@redhat.com > > >> > > To: "Fedor Gavrilov" < fgavr...@redhat.com > > >> > > Cc: "Liran Rotenberg" < lrote...@redhat.com >, "Dana Elfassy" < > >> > > delfa...@redhat.com >, "devel" < devel@ovirt.org > > >> > > Sent: Wednesday, March 18, 2020 11:45:28 AM > >> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev > >> > > package? > >> > > > >> > > On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavr...@redhat.com > >> > > >> > > wrote: > >> > > > > >> > > > For the time being I'm doing super careful clean installation of > >> both > >> > > engine and host in hopes of getting dev env working again... results > >> are > >> > > yet to be seen. > >> > > > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt > >> master > >> > > rpm for Fedora 30. Correct name for the package is > >> > > python3-ovirt-engine-sdk4. And more examples like that with random > >> package > >> > > renamings. > >> > > > > >> > > > README definitely needs an update. If you ask me, I would rather > >> provide > >> > > users with a single version (Fedora 30 only) of dev installation docs > >> that > >> > > works rather than with two versions that don't. > >> > > > >> > > Please do the update. > >> > > > >> > > Hopefully you will have more luck, my last README patch was abandoned > >> > > after > >> > > it was neglected by engine maintainers. > >> > > https://gerrit.ovirt.org/c/106467/ > >> > > > >> > > > Are there any reasons to keep CentOS 7 info there that's irrelevant > >> now? > >> > > > >> > > It should be dropped now. > >> > > > >> > > > I can rework the docs for FC30 eventually if no one minds. > >> > > > >> > > There is already a working fedora 30 instructions in the bottom of the > >> > > readme. It used to > >> > > work when Amit added it. > >> > > > >> > > > Or, if plans are to move to CentOS 8, maybe another brave soul can > >> do > >> > > that. > >> > > > Fedor > >> > > > > >> > > > ----- Original Message ----- > >> > > > From: "Liran Rotenberg" < lrote...@redhat.com > > >> > > > To: "Fedor Gavrilov" < fgavr...@redhat.com > > >> > > > Cc: "Dana Elfassy" < delfa...@redhat.com >, "devel" < > >> devel@ovirt.org > > >> > > > Sent: Tuesday, March 17, 2020 1:13:48 PM > >> > > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev > >> > > package? > >> > > > > >> > > > > >> > > > > >> > > > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < > >> fgavr...@redhat.com > > >> > > wrote: > >> > > > > >> > > > > >> > > > I just tried installing on Fedora 30 host and error stays the same, > >> so > >> > > it's probably not as OS. Might try clean setup next, what else... > >> > > > > >> > > > Liran, do you see anything of interest when you journalctl -u > >> > > ansible-runner-service | grep fatal ? > >> > > > No, we do see a trackback on the command pointing out to > >> > > python3.7/site-packages/runner_service/services/jobs.py > >> > > > But, because breakpoint that only makes things slower, I think it's > >> > > timing/locking issue somehow. > >> > > > > >> > > > > >> > > > > >> > > > Fedor > >> > > > > >> > > > ----- Original Message ----- > >> > > > From: "Liran Rotenberg" < lrote...@redhat.com > > >> > > > To: "Fedor Gavrilov" < fgavr...@redhat.com > > >> > > > Cc: "Martin Perina" < mper...@redhat.com >, "Dana Elfassy" < > >> > > delfa...@redhat.com >, "devel" < devel@ovirt.org > > >> > > > Sent: Tuesday, March 17, 2020 12:49:32 PM > >> > > > Subject: Re: [ovirt-devel] Re: what's up with > >> ansible-runner-service-dev > >> > > package? > >> > > > > >> > > > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < > >> fgavr...@redhat.com > > >> > > wrote: > >> > > > > >> > > > > I tried installing python 2 versions of some dependencies in > >> addition > >> > > to > >> > > > > python 3 (as > >> > > https://github.com/oVirt/ovirt-engine/blob/master/README.adoc > >> > > > > is not clear about it at all. on Fedora 30 default versions of > >> these > >> > > > > libraries you get when not specifying python vesion in the name > >> are > >> > > python > >> > > > > 2.) > >> > > > > Now error looks slightly different :'D > >> > > > > > >> > > > > 2020-03-17 11:08:27,294+01 ERROR > >> > > > > > >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > >> > > > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID: > >> > > > > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal > >> > > server > >> > > > > error, please check Ansible runner error log.. > >> > > > > > >> > > > > Everything else stays the same, host install fails almost > >> immediately. > >> > > > > Does someone have any notes for Fedora 30 install they can share? > >> > > > > > >> > > > I start seeing it too: > >> > > > ansible-runner-service-dev-1.0.1-1.fc30.noarch > >> > > > python3-ansible-runner-1.3.4-2.fc30.noarch > >> > > > engine: > >> > > > http://pastebin.test.redhat.com/845373 > >> > > > of course no ansible log.. > >> > > > This is what journalctl show: > >> > > > http://pastebin.test.redhat.com/845375 > >> > > > > >> > > > After doing some debugging in the engine, after setting a > >> breakpoint in > >> > > > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with > >> > > Step-Over > >> > > > until the execution (lines 139-147) it does work. Without breaking > >> point > >> > > > and making things slower it throws the error. > >> > > Here^ > > > > > > > >> > > > > > >> > > > > Thanks, > >> > > > > Fedor > >> > > > > > >> > > > > ----- Original Message ----- > >> > > > > From: "Fedor Gavrilov" < fgavr...@redhat.com > > >> > > > > To: "Martin Perina" < mper...@redhat.com > > >> > > > > Cc: "Dana Elfassy" < delfa...@redhat.com >, "devel" < > >> devel@ovirt.org > >> > > > > >> > > > > Sent: Monday, March 16, 2020 3:52:47 PM > >> > > > > Subject: [ovirt-devel] Re: what's up with > >> ansible-runner-service-dev > >> > > > > package? > >> > > > > > >> > > > > Sorry, my bad, it was just under my nose. Systemctl is not aware > >> of > >> > > > > gunicorn-3, but when I check journalctl for > >> ansible-runner-service I > >> > > see > >> > > > > the following: > >> > > > > > >> > > > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service. > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 > >> +0100] > >> > > [2992] > >> > > > > [INFO] Starting gunicorn 19.9.0 > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 > >> +0100] > >> > > [2992] > >> > > > > [INFO] Listening at: http://127.0.0.1:50001 (2992) > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 > >> +0100] > >> > > [2992] > >> > > > > [INFO] Using worker: sync > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 > >> +0100] > >> > > [2995] > >> > > > > [INFO] Booting worker with pid: 2995 > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 > >> +0100] > >> > > [2997] > >> > > > > [INFO] Booting worker with pid: 2997 > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local > >> configuration > >> > > > > options from /etc/ansible-runner-service/config.yaml > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting > >> playbooks_root_dir > >> > > to > >> > > > > > >> > > > >> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001 > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to > >> root > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key > >> to > >> > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime > >> overrides > >> > > from > >> > > > > environment variables > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings > >> > > > > overridden > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local > >> configuration > >> > > > > options from /etc/ansible-runner-service/config.yaml > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting > >> playbooks_root_dir > >> > > to > >> > > > > > >> > > > >> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001 > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to > >> root > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key > >> to > >> > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime > >> overrides > >> > > from > >> > > > > environment variables > >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings > >> > > > > overridden > >> > > > > > >> > > > > Is that any suspicious? :) > >> > > > > > >> > > > > ----- Original Message ----- > >> > > > > From: "Martin Perina" < mper...@redhat.com > > >> > > > > To: "Fedor Gavrilov" < fgavr...@redhat.com > > >> > > > > Cc: "Dana Elfassy" < delfa...@redhat.com >, "devel" < > >> devel@ovirt.org > >> > > > > >> > > > > Sent: Monday, March 16, 2020 3:36:40 PM > >> > > > > Subject: [ovirt-devel] Re: what's up with > >> ansible-runner-service-dev > >> > > > > package? > >> > > > > > >> > > > > > >> > > > > > >> > > > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < > >> fgavr...@redhat.com > >> > > > > >> > > > > wrote: > >> > > > > > >> > > > > > >> > > > > Nothing since there is no such service (or similarly named). > >> > > > > Package python3-gunicorn is installed though. > >> > > > > > >> > > > > After you start ansible-runner-service service, you should see > >> similar > >> > > > > logs in journalctl: > >> > > > > > >> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 > >> +0100] > >> > > > > [1386] [INFO] Starting gunicorn 19.9.0 > >> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 > >> +0100] > >> > > > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386) > >> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 > >> +0100] > >> > > > > [1386] [INFO] Using worker: sync > >> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 > >> +0100] > >> > > > > [1496] [INFO] Booting worker with pid: 1496 > >> > > > > And more if you execute some action from engine (like install new > >> host > >> > > or > >> > > > > upgrade a host) > >> > > > > > >> > > > > > >> > > > > > >> > > > > So does that mean that something was supposed to register it as a > >> > > service > >> > > > > but did not? > >> > > > > > >> > > > > Fedor > >> > > > > > >> > > > > ----- Original Message ----- > >> > > > > From: "Martin Perina" < mper...@redhat.com > > >> > > > > To: "Fedor Gavrilov" < fgavr...@redhat.com > > >> > > > > Cc: "Dana Elfassy" < delfa...@redhat.com >, "devel" < > >> devel@ovirt.org > >> > > > > >> > > > > Sent: Monday, March 16, 2020 3:13:03 PM > >> > > > > Subject: Re: [ovirt-devel] Re: what's up with > >> > > ansible-runner-service-dev > >> > > > > package? > >> > > > > > >> > > > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < > >> fgavr...@redhat.com > >> > > > > >> > > > > wrote: > >> > > > > > >> > > > > > FC30 dev env engine indeed :) I've done this before on other > >> OS, so > >> > > > > unless > >> > > > > > there is a blindspot somewhere in my eye it should be configured > >> > > fine. > >> > > > > > > >> > > > > > [apple@apple ~]$ sudo systemctl status ansible-runner-service > >> > > > > > ● ansible-runner-service.service - Ansible Runner Service > >> > > > > > Loaded: loaded > >> > > (/usr/lib/systemd/system/ansible-runner-service.service; > >> > > > > > enabled; vendor preset: disabled) > >> > > > > > Active: active (running) since Mon 2020-03-16 14:27:15 CET; > >> 16min > >> > > ago > >> > > > > > Main PID: 909 (gunicorn-3) > >> > > > > > Tasks: 9 (limit: 4915) > >> > > > > > Memory: 193.4M > >> > > > > > CGroup: /system.slice/ansible-runner-service.service > >> > > > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 > >> > > > > > -w 2 runner_service.wsgi:application > >> > > > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 > >> > > > > > -w 2 runner_service.wsgi:application > >> > > > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 > >> > > > > > -w 2 runner_service.wsgi:application > >> > > > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook > >> > > > > > --private-key > >> > > > > > > >> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i > >> > > > > > > >> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi> > >> > > > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux] > >> > > > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook > >> > > > > > --private-key > >> > > > > > > >> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i > >> > > > > > > >> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi> > >> > > > > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o > >> > > > > > StrictHostKeyChecking=no -o Port=22 -o > >> > > > > > > >> > > > > > >> > > > >> IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa" > >> > > > >> > > > > > >> > > > > > -o KbdInteractiveAu> > >> > > > > > > >> > > > > > And the config: > >> > > > > > > >> > > > > > --- > >> > > > > > version: 1 > >> > > > > > > >> > > > > > # playbooks_root_dir > >> > > > > > # location of the playbooks that the service will start > >> > > > > > playbooks_root_dir: > >> > > > > > > >> > > > > > >> > > > >> '/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project' > >> > > > >> > > > > > >> > > > > > # port > >> > > > > > # tcp port for the service to listen to > >> > > > > > port: 50001 > >> > > > > > # > >> > > > > > # ip_address > >> > > > > > # Specific IP address to bind to > >> > > > > > # ip_address: '0.0.0.0' > >> > > > > > target_user: root > >> > > > > > #event_cache_size: 3 > >> > > > > > ssh_private_key: > >> > > > > > > >> '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa' > >> > > > > > > >> > > > > > /home/apple/ovirt-engine is where engine is dev-installed. Not > >> sure > >> > > what > >> > > > > > else to check now... > >> > > > > > > >> > > > > > >> > > > > Anything strange in journalctl for gunicorn-3 service? > >> > > > > > >> > > > > > > >> > > > > > > >> > > > > > ----- Original Message ----- > >> > > > > > From: "Martin Perina" < mper...@redhat.com > > >> > > > > > To: "Fedor Gavrilov" < fgavr...@redhat.com > > >> > > > > > Cc: "Dana Elfassy" < delfa...@redhat.com >, "devel" < > >> > > devel@ovirt.org > > >> > > > > > Sent: Monday, March 16, 2020 2:56:59 PM > >> > > > > > Subject: Re: [ovirt-devel] Re: what's up with > >> > > ansible-runner-service-dev > >> > > > > > package? > >> > > > > > > >> > > > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < > >> fgavr...@redhat.com > >> > > > > >> > > > > > wrote: > >> > > > > > > >> > > > > > > Actually, it was too early for me to celebrate. > >> > > > > > > > >> > > > > > > On Fedora 30, the engine compiles and runs fine, but when I > >> try > >> > > adding > >> > > > > > the > >> > > > > > > host installation fails almost immediately and I get the > >> following > >> > > > > errors > >> > > > > > > in the engine logs: > >> > > > > > > > >> > > > > > > ERROR > >> > > [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] > >> > > > > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host > >> > > installation > >> > > > > > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228', > >> 'banana': > >> > > > > Failed > >> > > > > > to > >> > > > > > > execute Ansible host-deploy role: Internal server error, > >> please > >> > > check > >> > > > > > > Ansible runner error log.. Please check logs for more details: > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > >> /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log > >> > > > >> > > > > > >> > > > > > > > >> > > > > > > There is nothing else. There is no file > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > >> /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log > >> > > > >> > > > > > >> > > > > > > Snapshot I'm using for the host is the same that worked just > >> fine > >> > > when > >> > > > > > > engine was running on CentOS 7 and is CentOS 7 itself. Is > >> that an > >> > > > > issue? > >> > > > > > > > >> > > > > > > >> > > > > > As you mentioned building engine I assume you are using engine > >> in > >> > > dev > >> > > > > env > >> > > > > > on FC30, right? If so, have you manually configured > >> > > > > ansible-runner-service > >> > > > > > for dev env as mentioned in > >> > > > > > > >> > > > > > > >> > > > > > >> > > > >> https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-runner-service-configration > >> > > > > > ? > >> > > > > > > >> > > > > > > >> > > > > > > Thanks, > >> > > > > > > Fedor > >> > > > > > > > >> > > > > > > ----- Original Message ----- > >> > > > > > > From: "Fedor Gavrilov" < fgavr...@redhat.com > > >> > > > > > > To: "Martin Perina" < mper...@redhat.com > > >> > > > > > > Cc: "Dana Elfassy" < delfa...@redhat.com >, "devel" < > >> > > devel@ovirt.org > >> > > > > > > >> > > > > > > Sent: Monday, March 16, 2020 12:37:44 PM > >> > > > > > > Subject: [ovirt-devel] Re: what's up with > >> > > ansible-runner-service-dev > >> > > > > > > package? > >> > > > > > > > >> > > > > > > Hi, > >> > > > > > > > >> > > > > > > Resolved through installing engine on Fedora 30. From what I > >> > > > > understand, > >> > > > > > > CentOS 7 is not supported anymore. > >> > > > > > > > >> > > > > > > Fedor > >> > > > > > > > >> > > > > > > ----- Original Message ----- > >> > > > > > > From: "Martin Perina" < mper...@redhat.com > > >> > > > > > > To: "Fedor Gavrilov" < fgavr...@redhat.com > > >> > > > > > > Cc: "Benny Zlotnik" < bzlot...@redhat.com >, "Dana Elfassy" < > >> > > > > > > delfa...@redhat.com >, "devel" < devel@ovirt.org >, "Eyal > >> > > Shenitzky" > >> > > > > < > >> > > > > > > eshen...@redhat.com > > >> > > > > > > Sent: Monday, March 16, 2020 8:11:35 AM > >> > > > > > > Subject: Re: [ovirt-devel] Re: what's up with > >> > > > > ansible-runner-service-dev > >> > > > > > > package? > >> > > > > > > > >> > > > > > > Hi Fedor, > >> > > > > > > > >> > > > > > > ansible-runner-service-dev package is available from > >> > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > >> https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-runner-service/ > >> > > > > > > repos which is included in ovirt-master-release package, which > >> > > > > > > includes all repositories necessary for oVirt development: > >> > > > > > > > >> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > >> > > > > > > > >> > > > > > > Was your issue resolved or not? > >> > > > > > > > >> > > > > > > Regards, > >> > > > > > > Martin > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < > >> > > eshen...@redhat.com > >> > > > > > > >> > > > > > > wrote: > >> > > > > > > > >> > > > > > > > Adding also +Dana Elfassy < delfa...@redhat.com > > >> > > > > > > > > >> > > > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < > >> > > bzlot...@redhat.com > > >> > > > > > wrote: > >> > > > > > > > > >> > > > > > > >> ansible-runner was added in 4.4, you shouldn't need in 4.3 > >> > > > > > > >> > >> > > > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov < > >> > > > > fgavr...@redhat.com > > >> > > > > > > >> wrote: > >> > > > > > > >> > > >> > > > > > > >> > Hi Sandro, > >> > > > > > > >> > > >> > > > > > > >> > Thanks for the suggestion, but it seems to not help much. > >> > > > > > > >> > > >> > > > > > > >> > ansible-runner-service-dev still can't be found, I > >> checked > >> > > repos > >> > > > > > that > >> > > > > > > >> are installed from > >> > > > > > > >> > >> > > > > > >> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm > >> > > > > > > >> and haven't found similarly names packages either... > >> > > > > > > >> > > >> > > > > > > >> > $ sudo yum install ansible-runner-service-dev > >> > > > > > > >> > Loaded plugins: fastestmirror > >> > > > > > > >> > Repository centos-sclo-rh-release is listed more than > >> once in > >> > > the > >> > > > > > > >> configuration > >> > > > > > > >> > Repository sac-gluster-ansible is listed more than once > >> in > >> > > the > >> > > > > > > >> configuration > >> > > > > > > >> > Determining fastest mirrors > >> > > > > > > >> > ovirt-4.3-epel/x86_64/metalink > >> > > > > > > >> > >> > > > > > > >> | 30 kB 00:00:00 > >> > > > > > > >> > ovirt-master-epel/x86_64/metalink > >> > > > > > > >> > >> > > > > > > >> | 30 kB 00:00:00 > >> > > > > > > >> > * base: ftp.sh.cvut.cz > >> > > > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz > >> > > > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz > >> > > > > > > >> > * extras: ftp.sh.cvut.cz > >> > > > > > > >> > * ovirt-4.3-epel: mirror.karneval.cz > >> > > > > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net > >> > > > > > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net > >> > > > > > > >> > * ovirt-master-epel: mirror.karneval.cz > >> > > > > > > >> > * ovirt-master-snapshot: ftp.plusline.net > >> > > > > > > >> > * ovirt-master-snapshot-static: ftp.plusline.net > >> > > > > > > >> > * updates: ftp.sh.cvut.cz > >> > > > > > > >> > base > >> > > > > > > >> > >> > > > > > > >> | 3.6 kB 00:00:00 > >> > > > > > > >> > centos-opstools-release > >> > > > > > > >> > >> > > > > > > >> | 2.9 kB 00:00:00 > >> > > > > > > >> > centos-ovirt-common-testing > >> > > > > > > >> > >> > > > > > > >> | 3.4 kB 00:00:00 > >> > > > > > > >> > centos-ovirt44-testing > >> > > > > > > >> > >> > > > > > > >> | 3.4 kB 00:00:00 > >> > > > > > > >> > centos-qemu-ev-release > >> > > > > > > >> > >> > > > > > > >> | 3.4 kB 00:00:00 > >> > > > > > > >> > centos-sclo-rh > >> > > > > > > >> > >> > > > > > > >> | 3.0 kB 00:00:00 > >> > > > > > > >> > centos-sclo-rh-release > >> > > > > > > >> > >> > > > > > > >> | 3.0 kB 00:00:00 > >> > > > > > > >> > centos-sclo-sclo > >> > > > > > > >> > >> > > > > > > >> | 2.9 kB 00:00:00 > >> > > > > > > >> > epel-apache-maven > >> > > > > > > >> > >> > > > > > > >> | 3.3 kB 00:00:00 > >> > > > > > > >> > extras > >> > > > > > > >> > >> > > > > > > >> | 2.9 kB 00:00:00 > >> > > > > > > >> > ovirt-4.3-centos-gluster6 > >> > > > > > > >> > >> > > > > > > >> | 2.9 kB 00:00:00 > >> > > > > > > >> > ovirt-4.3-centos-opstools > >> > > > > > > >> > >> > > > > > > >> | 2.9 kB 00:00:00 > >> > > > > > > >> > ovirt-4.3-centos-ovirt43 > >> > > > > > > >> > >> > > > > > > >> | 2.9 kB 00:00:00 > >> > > > > > > >> > ovirt-4.3-centos-qemu-ev > >> > > > > > > >> > >> > > > > > > >> | 2.9 kB 00:00:00 > >> > > > > > > >> > ovirt-4.3-epel > >> > > > > > > >> > >> > > > > > > >> | 5.3 kB 00:00:00 > >> > > > > > > >> > ovirt-4.3-snapshot > >> > > > > > > >> > >> > > > > > > >> | 3.0 kB 00:00:00 > >> > > > > > > >> > ovirt-4.3-snapshot-static > >> > > > > > > >> > >> > > > > > > >> | 3.0 kB 00:00:00 > >> > > > > > > >> > ovirt-4.3-virtio-win-latest > >> > > > > > > >> > >> > > > > > > >> | 3.0 kB 00:00:00 > >> > > > > > > >> > ovirt-master-centos-gluster6 > >> > > > > > > >> > >> > > > > > > >> | 2.9 kB 00:00:00 > >> > > > > > > >> > ovirt-master-centos-opstools-testing > >> > > > > > > >> > >> > > > > > > >> | 2.9 kB 00:00:00 > >> > > > > > > >> > ovirt-master-epel > >> > > > > > > >> > >> > > > > > > >> | 5.3 kB 00:00:00 > >> > > > > > > >> > ovirt-master-snapshot > >> > > > > > > >> > >> > > > > > > >> | 3.0 kB 00:00:00 > >> > > > > > > >> > ovirt-master-snapshot-static > >> > > > > > > >> > >> > > > > > > >> | 3.0 kB 00:00:00 > >> > > > > > > >> > ovirt-master-virtio-win-latest > >> > > > > > > >> > >> > > > > > > >> | 3.0 kB 00:00:00 > >> > > > > > > >> > ovirtwebui-ovirt-web-ui-master > >> > > > > > > >> > >> > > > > > > >> | 3.0 kB 00:00:00 > >> > > > > > > >> > sac-gluster-ansible > >> > > > > > > >> > >> > > > > > > >> | 3.3 kB 00:00:00 > >> > > > > > > >> > updates > >> > > > > > > >> > >> > > > > > > >> | 2.9 kB 00:00:00 > >> > > > > > > >> > (1/32): base/7/x86_64/group_gz > >> > > > > > > >> > >> > > > > > > >> | 165 kB 00:00:00 > >> > > > > > > >> > (2/32): base/7/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 6.0 MB 00:00:00 > >> > > > > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 4.2 MB 00:00:00 > >> > > > > > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 9.3 kB 00:00:00 > >> > > > > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 344 kB 00:00:00 > >> > > > > > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 1.1 kB 00:00:01 > >> > > > > > > >> > (7/32): extras/7/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 164 kB 00:00:00 > >> > > > > > > >> > (8/32): centos-opstools-release/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 429 kB 00:00:01 > >> > > > > > > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 101 kB 00:00:01 > >> > > > > > > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 116 kB 00:00:00 > >> > > > > > > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 73 kB 00:00:00 > >> > > > > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz > >> > > > > > > >> > >> > > > > > > >> | 90 kB 00:00:00 > >> > > > > > > >> > (13/32): epel-apache-maven/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 5.0 kB 00:00:01 > >> > > > > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo > >> > > > > > > >> > >> > > > > > > >> | 1.0 MB 00:00:00 > >> > > > > > > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 429 kB 00:00:00 > >> > > > > > > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 211 kB 00:00:00 > >> > > > > > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db > >> > > > > > > >> > >> > > > > > > >> | 3.4 kB 00:00:00 > >> > > > > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db > >> > > > > > > >> > >> > > > > > > >> | 109 kB 00:00:00 > >> > > > > > > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 116 kB 00:00:00 > >> > > > > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 6.7 MB 00:00:00 > >> > > > > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz > >> > > > > > > >> > >> > > > > > > >> | 90 kB 00:00:00 > >> > > > > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo > >> > > > > > > >> > >> > > > > > > >> | 1.0 MB 00:00:00 > >> > > > > > > >> > (23/32): ovirt-master-snapshot/7/primary_db > >> > > > > > > >> > >> > > > > > > >> | 54 kB 00:00:00 > >> > > > > > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db > >> > > > > > > >> > >> > > > > > > >> | 7.6 kB 00:00:01 > >> > > > > > > >> > (25/32): ovirt-master-snapshot-static/7/primary_db > >> > > > > > > >> > >> > > > > > > >> | 4.6 kB 00:00:00 > >> > > > > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 6.7 MB 00:00:00 > >> > > > > > > >> > (27/32): ovirt-master-virtio-win-latest/primary_db > >> > > > > > > >> > >> > > > > > > >> | 7.6 kB 00:00:00 > >> > > > > > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 4.2 MB 00:00:03 > >> > > > > > > >> > (29/32): updates/7/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 6.7 MB 00:00:00 > >> > > > > > > >> > (30/32): > >> > > ovirt-master-centos-opstools-testing/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 611 kB 00:00:01 > >> > > > > > > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 2.3 kB 00:00:00 > >> > > > > > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db > >> > > > > > > >> > >> > > > > > > >> | 13 kB 00:00:00 > >> > > > > > > >> > No package ansible-runner-service-dev available. > >> > > > > > > >> > Error: Nothing to do > >> > > > > > > >> > > >> > > > > > > >> > > >> > > > > > > >> > Fedor > >> > > > > > > >> > > >> > > > > > > >> > ----- Original Message ----- > >> > > > > > > >> > From: "Sandro Bonazzola" < sbona...@redhat.com > > >> > > > > > > >> > To: "Fedor Gavrilov" < fgavr...@redhat.com > > >> > > > > > > >> > Cc: "Eyal Shenitzky" < eshen...@redhat.com >, "devel" < > >> > > > > > devel@ovirt.org > > >> > > > > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM > >> > > > > > > >> > Subject: Re: [ovirt-devel] Re: what's up with > >> > > > > > > >> ansible-runner-service-dev package? > >> > > > > > > >> > > >> > > > > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov < > >> > > > > > > >> fgavr...@redhat.com > > >> > > > > > > >> > ha scritto: > >> > > > > > > >> > > >> > > > > > > >> > > Thanks for the response, Eyal! > >> > > > > > > >> > > > >> > > > > > > >> > > I already had ovirt-master repo installed, but updated > >> > > > > everything > >> > > > > > > >> just in > >> > > > > > > >> > > case. > >> > > > > > > >> > > I even tried both yum and dnf (since yum on centos was > >> > > giving > >> > > > > me > >> > > > > > > lots > >> > > > > > > >> of > >> > > > > > > >> > > grief before and I learned their behaviour differs, > >> > > especially > >> > > > > > when > >> > > > > > > it > >> > > > > > > >> > > comes to bugs) but none works... > >> > > > > > > >> > > > >> > > > > > > >> > > >No package ansible-runner-service-dev available. > >> > > > > > > >> > > >No match for argument: ansible-runner-service-dev > >> > > > > > > >> > > > >> > > > > > > >> > > Fedor > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > Looks like you're trying to install > >> ovirt-master-snapshot on > >> > > el7. > >> > > > > > > >> > It won't work. > >> > > > > > > >> > Master is not supporting el7 anymore. > >> > > > > > > >> > You can use 4.3 snapshot rpm at : > >> > > > > > > >> > > >> > > > > > > >> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm > >> > > > > > > >> if > >> > > > > > > >> > you need to stay on el7. > >> > > > > > > >> > > >> > > > > > > >> > > >> > > > > > > >> > > ----- Original Message ----- > >> > > > > > > >> > > From: "Eyal Shenitzky" < eshen...@redhat.com > > >> > > > > > > >> > > To: "Fedor Gavrilov" < fgavr...@redhat.com > > >> > > > > > > >> > > Cc: "devel" < devel@ovirt.org > > >> > > > > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM > >> > > > > > > >> > > Subject: Re: [ovirt-devel] what's up with > >> > > > > > ansible-runner-service-dev > >> > > > > > > >> > > package? > >> > > > > > > >> > > > >> > > > > > > >> > > Hi Fedor, > >> > > > > > > >> > > > >> > > > > > > >> > > Please try: > >> > > > > > > >> > > 1. dnf install > >> > > > > > > >> > > > >> > > > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > >> > > > > > > >> > > 2. dnf update > >> > > > > > > >> > > 3. dnf install ansible-runner-service-dev > >> > > > > > > >> > > 4. flow the instruction from thread 'New dependency for > >> > > > > > development > >> > > > > > > >> > > environment' > >> > > > > > > >> > > The > >> > > > > > > >> > > > >> > > > > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov < > >> > > > > fgavr...@redhat.com > >> > > > > > > > >> > > > > > > >> wrote: > >> > > > > > > >> > > > >> > > > > > > >> > > > Hi everyone, > >> > > > > > > >> > > > > >> > > > > > > >> > > > After I screwed up my dev environment beyond repair I > >> > > have to > >> > > > > > set > >> > > > > > > >> it up > >> > > > > > > >> > > > again and I see something I haven't last time > >> (CentOS 7): > >> > > > > > > >> > > > > >> > > > > > > >> > > > $ sudo yum install ansible-runner-service-dev > >> > > > > > > >> > > > Loaded plugins: fastestmirror > >> > > > > > > >> > > > Loading mirror speeds from cached hostfile > >> > > > > > > >> > > > * base: mirror.hosting90.cz > >> > > > > > > >> > > > * centos-sclo-rh: mirror.hosting90.cz > >> > > > > > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz > >> > > > > > > >> > > > * extras: mirror.hosting90.cz > >> > > > > > > >> > > > * ovirt-master-epel: mirror.hosting90.cz > >> > > > > > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl > >> > > > > > > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl > >> > > > > > > >> > > > * updates: mirror.hosting90.cz > >> > > > > > > >> > > > No package ansible-runner-service-dev available. > >> > > > > > > >> > > > > >> > > > > > > >> > > > Maybe something's missing from my notes, but where > >> did it > >> > > go? > >> > > > > > > >> Should I > >> > > > > > > >> > > add > >> > > > > > > >> > > > some repo? > >> > > > > > > >> > > > > >> > > > > > > >> > > > Fedor > >> > > > > > > >> > > > _______________________________________________ > >> > > > > > > >> > > > Devel mailing list -- devel@ovirt.org > >> > > > > > > >> > > > To unsubscribe send an email to > >> devel-le...@ovirt.org > >> > > > > > > >> > > > Privacy Statement: > >> > > https://www.ovirt.org/privacy-policy.html > >> > > > > > > >> > > > oVirt Code of Conduct: > >> > > > > > > >> > > > > >> > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > > > > > >> > > > List Archives: > >> > > > > > > >> > > > > >> > > > > > > >> > > > >> > > > > > > >> > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3IROMSBEKGFWEOSA7NJ4K2/ > >> > > > > > > >> > > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > -- > >> > > > > > > >> > > Regards, > >> > > > > > > >> > > Eyal Shenitzky > >> > > > > > > >> > > _______________________________________________ > >> > > > > > > >> > > Devel mailing list -- devel@ovirt.org > >> > > > > > > >> > > To unsubscribe send an email to devel-le...@ovirt.org > >> > > > > > > >> > > Privacy Statement: > >> > > https://www.ovirt.org/privacy-policy.html > >> > > > > > > >> > > oVirt Code of Conduct: > >> > > > > > > >> > > > >> https://www.ovirt.org/community/about/community-guidelines/ > >> > > > > > > >> > > List Archives: > >> > > > > > > >> > > > >> > > > > > > >> > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSVFXEALXWGSDGDFJACHNTDI/ > >> > > > > > > >> > > > >> > > > > > > >> > > >> > > > > > > >> > > >> > > > > > > >> > -- > >> > > > > > > >> > > >> > > > > > > >> > Sandro Bonazzola > >> > > > > > > >> > > >> > > > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > >> > > > > > > >> > > >> > > > > > > >> > Red Hat EMEA < https://www.redhat.com/ > > >> > > > > > > >> > > >> > > > > > > >> > sbona...@redhat.com > >> > > > > > > >> > < https://www.redhat.com/ >*Red Hat respects your work > >> life > >> > > > > balance. > >> > > > > > > >> > Therefore there is no need to answer this email out of > >> your > >> > > > > office > >> > > > > > > >> hours. > >> > > > > > > >> > < https://mojo.redhat.com/docs/DOC-1199578 >* > >> > > > > > > >> > _______________________________________________ > >> > > > > > > >> > Devel mailing list -- devel@ovirt.org > >> > > > > > > >> > To unsubscribe send an email to devel-le...@ovirt.org > >> > > > > > > >> > Privacy Statement: > >> https://www.ovirt.org/privacy-policy.html > >> > > > > > > >> > oVirt Code of Conduct: > >> > > > > > > >> > >> https://www.ovirt.org/community/about/community-guidelines/ > >> > > > > > > >> > List Archives: > >> > > > > > > >> > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47ANIF2X6RGU4OAMKH23M23SP/ > >> > > > > > > >> _______________________________________________ > >> > > > > > > >> Devel mailing list -- devel@ovirt.org > >> > > > > > > >> To unsubscribe send an email to devel-le...@ovirt.org > >> > > > > > > >> Privacy Statement: > >> https://www.ovirt.org/privacy-policy.html > >> > > > > > > >> oVirt Code of Conduct: > >> > > > > > > >> > >> https://www.ovirt.org/community/about/community-guidelines/ > >> > > > > > > >> List Archives: > >> > > > > > > >> > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3IQRMADBKOHTTL43FMNX47/ > >> > > > > > > >> > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > -- > >> > > > > > > > Regards, > >> > > > > > > > Eyal Shenitzky > >> > > > > > > > _______________________________________________ > >> > > > > > > > Devel mailing list -- devel@ovirt.org > >> > > > > > > > To unsubscribe send an email to devel-le...@ovirt.org > >> > > > > > > > Privacy Statement: > >> https://www.ovirt.org/privacy-policy.html > >> > > > > > > > oVirt Code of Conduct: > >> > > > > > > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > > > > > > List Archives: > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7ALS27OSWVLJQAVDWLV6H5RJ/ > >> > > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > -- > >> > > > > > > Martin Perina > >> > > > > > > Manager, Software Engineering > >> > > > > > > Red Hat Czech s.r.o. > >> > > > > > > _______________________________________________ > >> > > > > > > Devel mailing list -- devel@ovirt.org > >> > > > > > > To unsubscribe send an email to devel-le...@ovirt.org > >> > > > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > > > > > > oVirt Code of Conduct: > >> > > > > > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > > > > > List Archives: > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ7TREJSGWNMQS7YCL2OMCX/ > >> > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > -- > >> > > > > > Martin Perina > >> > > > > > Manager, Software Engineering > >> > > > > > Red Hat Czech s.r.o. > >> > > > > > > >> > > > > > > >> > > > > > >> > > > > -- > >> > > > > Martin Perina > >> > > > > Manager, Software Engineering > >> > > > > Red Hat Czech s.r.o. > >> > > > > > >> > > > > > >> > > > > > >> > > > > -- > >> > > > > Martin Perina > >> > > > > Manager, Software Engineering > >> > > > > Red Hat Czech s.r.o. > >> > > > > > >> > > > > _______________________________________________ > >> > > > > Devel mailing list -- devel@ovirt.org > >> > > > > To unsubscribe send an email to devel-le...@ovirt.org > >> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > > > > oVirt Code of Conduct: > >> > > > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > > > List Archives: > >> > > > > > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN74IG2XGHKWNJQR2X2KLCG7/ > >> > > > > _______________________________________________ > >> > > > > Devel mailing list -- devel@ovirt.org > >> > > > > To unsubscribe send an email to devel-le...@ovirt.org > >> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > > > > oVirt Code of Conduct: > >> > > > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > > > List Archives: > >> > > > > > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC46WRX3BNCYVJE6QD22XTG/ > >> > > > > _______________________________________________ > >> > > > > Devel mailing list -- devel@ovirt.org > >> > > > > To unsubscribe send an email to devel-le...@ovirt.org > >> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > > > > oVirt Code of Conduct: > >> > > > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > > > List Archives: > >> > > > > > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZHORBKKS4TRX7MSYQ6XWHZ/ > >> > > > > > >> > > > > >> > > > > >> > > > _______________________________________________ > >> > > > Devel mailing list -- devel@ovirt.org > >> > > > To unsubscribe send an email to devel-le...@ovirt.org > >> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > > > oVirt Code of Conduct: > >> > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > > List Archives: > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6FT4VNNZ4FO3L7ZRQQIAOO7/ > >> > > > _______________________________________________ > >> > > > Devel mailing list -- devel@ovirt.org > >> > > > To unsubscribe send an email to devel-le...@ovirt.org > >> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > > > oVirt Code of Conduct: > >> > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > > List Archives: > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJEN7L2ISDKS4MWF6Y2KJNF/ > >> > > _______________________________________________ > >> > > Devel mailing list -- devel@ovirt.org > >> > > To unsubscribe send an email to devel-le...@ovirt.org > >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > > oVirt Code of Conduct: > >> > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > List Archives: > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF2HXOFFFL7STLMYJMNAVYR/ > >> > > > >> > > > >> > > _______________________________________________ > >> > > Devel mailing list -- devel@ovirt.org > >> > > To unsubscribe send an email to devel-le...@ovirt.org > >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > > oVirt Code of Conduct: > >> > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > List Archives: > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7EUJM4XI7VOOGJN52RGJIB/ > >> > > _______________________________________________ > >> > > Devel mailing list -- devel@ovirt.org > >> > > To unsubscribe send an email to devel-le...@ovirt.org > >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > > oVirt Code of Conduct: > >> > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > List Archives: > >> > > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVCQISSVKSTTHIQB7KRMWAZW/ > >> > > > >> > > >> > > >> > -- > >> > Martin Perina > >> > Manager, Software Engineering > >> > Red Hat Czech s.r.o. > >> > _______________________________________________ > >> > Devel mailing list -- devel@ovirt.org > >> > To unsubscribe send an email to devel-le...@ovirt.org > >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > oVirt Code of Conduct: > >> https://www.ovirt.org/community/about/community-guidelines/ > >> > List Archives: > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ3IIYSPKI2JLX4VATB3P56/ > >> _______________________________________________ > >> Devel mailing list -- devel@ovirt.org > >> To unsubscribe send an email to devel-le...@ovirt.org > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> oVirt Code of Conduct: > >> https://www.ovirt.org/community/about/community-guidelines/ > >> List Archives: > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J6WYKCHUBP5F4FKHXIUPLSMQDEHU6HRD/ > >> _______________________________________________ > >> Devel mailing list -- devel@ovirt.org > >> To unsubscribe send an email to devel-le...@ovirt.org > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> oVirt Code of Conduct: > >> https://www.ovirt.org/community/about/community-guidelines/ > >> List Archives: > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/46N4CS3HJTJCJHHBPKMHRJYNUS6OYGO3/ > >> > > > > > > -- > > Regards, > > Eyal Shenitzky > > > _______________________________________________ > Devel mailing list -- devel@ovirt.org > To unsubscribe send an email to devel-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/2IIVS6MVVRZJAVFL5ZP4RNCY6ULJWLPM/ _______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/ZJRMDYVR4TBCD4MXNPV3LWK5CSOWBE67/