Seems to me that a quick riotboot porting guide could be useful somewhere in the wiki.
On Mon, May 27, 2019 at 2:30 PM Gaëtan Harter <gaetan.har...@fu-berlin.de> wrote: > Hi Brenton, > > if you only use the default `riotboot/flash` or `flash` in > `tests/riotboot` targets, you do not need flasher changes. > But you should not use `riotboot/flash-slot0` and `riotboot/flash-slot1` > targets for the moment. > > To have the support declared and merged in RIOT, it also needs to > support flashing the `slot-` firmwares alone. These require having > flasher that can flash with an offset`. > > For `cc2538-bsl.py` it looks like there is the `-a` option for this. > > Maybe changing it to use `IMAGE_OFFSET` if set would be enough. > An example is in > > https://github.com/RIOT-OS/RIOT/blob/8fe12bc82cfbb83a90efd018e11c044d0a40696b/makefiles/tools/edbg.inc.mk#L14-L15 > > The `flash.sh` is currently using `jlink` without using the common > `jlink` scripts thing, it is in my todo list after > https://github.com/RIOT-OS/RIOT/pull/11554 to migrate to use the common > one where applicable. > > Cheers, > Gaëtan > > On 5/24/19 2:32 PM, Francisco Acosta wrote: > > Hi Brenton! > > > > So far I remember we didn't take it into account, and I don't know if > > someone is taking care of it. > > > > As far as I know, there are two ways of supporting that CPU: > > > > 1. The way we do it now, which is linking the image in another start > > address so the bootloader can recognise it and boot it. > > > > 2. Modify the start address on the CC2538 register dedicated to this. > > This might be a bit tricky but also interesting for the sake of research > > and compatibility. > > > > However, I'd advice the first option to have the full benefits of the > > bootloader and struggling less with the particular settings on that > > chip. > > > > Overall, the steps would be the following: > > > > 1. Adapt the linker scripts to succeed tests/cortexm_common_ldscript. > > This consists on making the linker scripts on cpu/cc2838/ldscripts > > comply with cpu/cortexm_common/ldscrpts/cortexm.ld. You might take a > > look how is it done for stm32 or sam0 families. > > > > 2. Provide the length and start variables to link slots correctly: > > - ROM_LEN > > - RAM_LEN > > - ROM_START_ADDR > > - RAM_START_ADDR > > > > Again, take a look on the supported CPUs as examples. > > > > 3. Make tests/riotboot pass > > > > 4. Perform a firmware update or flash different firmwares with different > > versions so the bootloader choses the newest. > > > > Optionally you might want to test if the WIP SUIT update format works. > > > > Don't hesitate to make more questions if you have some! > > > > Cheers, > > > > Paco. > > > > > > On 24/05/2019 13:43, Brenton Chetty wrote: > >> Hey guys, has anyone succeeded in providing riotboot support for the > >> cc2538dk board as yet? > >> > >> _______________________________________________ > >> devel mailing list > >> devel@riot-os.org > >> https://lists.riot-os.org/mailman/listinfo/devel > >> > > _______________________________________________ > > devel mailing list > > devel@riot-os.org > > https://lists.riot-os.org/mailman/listinfo/devel > _______________________________________________ > devel mailing list > devel@riot-os.org > https://lists.riot-os.org/mailman/listinfo/devel >
_______________________________________________ devel mailing list devel@riot-os.org https://lists.riot-os.org/mailman/listinfo/devel