On 21/10/15 21:53, Isaac Gutekunst wrote:
Hi Devel,
I looked for a while, but couldn't find a way to specify what
resources (semaphores, tasks, etc) a BSP requires for an empty project
(empty Init function).
There is no useful support for this and this is a constant source of
problems.
One way out of this situation would be to use self-contained objects for
the drivers.
I took a look at this page:
https://docs.rtems.org/doc-current/share/rtems/html/bsp_howto/Initialization-Code-The-RTEMS-Configuration-Table.html
but couldn't glean the correct method.
What is the preferred way to do so?
Our BSP uses a number of resources for hardware drivers, including
UART, CAN, SPI, I2C and Ethernet.
In case an empty project includes all these drivers, then something is
wrong with this BSP.
--
Sebastian Huber, embedded brains GmbH
Address : Dornierstr. 4, D-82178 Puchheim, Germany
Phone : +49 89 189 47 41-16
Fax : +49 89 189 47 41-09
E-Mail : sebastian.hu...@embedded-brains.de
PGP : Public key available on request.
Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG.
_______________________________________________
devel mailing list
devel@rtems.org
http://lists.rtems.org/mailman/listinfo/devel
