This looks good to commit if anyone can get to it.
On Sat, Feb 20, 2016 at 2:26 PM, punitvara <punitv...@gmail.com> wrote: > This patch basically fixes some typo in document file. > --- > testsuites/samples/fileio/fileio.doc | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/testsuites/samples/fileio/fileio.doc > b/testsuites/samples/fileio/fileio.doc > index 0a43601..95d50b1 100644 > --- a/testsuites/samples/fileio/fileio.doc > +++ b/testsuites/samples/fileio/fileio.doc > @@ -22,17 +22,17 @@ A sample session might look like this: > - start this system > > - select "p" (part_table_initialize) to read in the partition table of > -first harddisk, enter the device name "/dev/hda", when prompted > +first hard disk, enter the device name "/dev/hda", when prompted > > - select "f" (fsmount) to try to mount the partitions > - /dev/hda1../dev/hdc4 to corresponding mount points. Non-existant > + /dev/hda1../dev/hdc4 to corresponding mount points. Non-existent > partitions will report an error, but will not abort the tests > > - select "w" (write file) to create a new file on the mounted disk (or > in the IMFS). Enter the file name (e.g. "/mnt/hda1/test_1M.txt"), > the file size (e.g. 64K or 2M) and the buffer size to use for the > write calls (e.g. 32 or 4K). Then the sample will try to write the > - corresponding file and print the time consumed and data rate achived. > + corresponding file and print the time consumed and data rate achieved. > > - select "r" (read file) to read a file (without displaying the > contents). It has similar parameters as "write file", but does not > -- > 2.7.1 > > _______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel