The following is the output of the configure statement (I ran configure again because I did not save the output of the previous one)
thd@thd-Inspiron-5537:~/development/rtems/src/builds/erc32_test1$ ../../rtems/configure --target=sparc-rtems4.12 --enable-rtemsbsp=erc32 --enable-tests --prefix=${HOME}/development/rtems/install_path_test1 checking for gmake... no checking for make... make checking for RTEMS Version... 4.11.99.0 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... sparc-unknown-rtems4.12 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking that generated files are newer than configure... done configure: creating ./config.status configure: configuring in ./tools/build configure: running /bin/sh '../../../../rtems/tools/build/configure' '--prefix=/home/thd/development/rtems/install_path_test1' '--host=x86_64-pc-linux-gnu' '--build=x86_64-pc-linux-gnu' '--enable-rtemsbsp=erc32' '--enable-tests' '--target=sparc-rtems4.12' '--cache-file=/dev/null' '--srcdir=../../../../rtems/tools/build' checking for gmake... no checking for make... make checking for RTEMS Version... 4.11.99.0 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for x86_64-pc-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking libgen.h usability... yes checking libgen.h presence... yes checking for libgen.h... yes checking for strerror... yes checking for strtol... yes checking for basename... yes checking for strnlen... yes checking for bash... /bin/bash checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating install-if-change config.status: creating config.h config.status: executing depfiles commands configure: configuring in ./tools/cpu configure: running /bin/sh '../../../../rtems/tools/cpu/configure' '--prefix=/home/thd/development/rtems/install_path_test1' '--host=x86_64-pc-linux-gnu' '--build=x86_64-pc-linux-gnu' '--enable-rtemsbsp=erc32' '--enable-tests' '--target=sparc-rtems4.12' '--cache-file=/dev/null' '--srcdir=../../../../rtems/tools/cpu' checking for gmake... no checking for make... make checking for RTEMS Version... 4.11.99.0 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... sparc-unknown-rtems4.12 checking rtems target cpu... sparc checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for bash... /bin/bash checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile === configuring in generic (/home/thd/development/rtems/src/builds/erc32_test1/tools/cpu/generic) configure: running /bin/sh ../../../../../rtems/tools/cpu/generic/configure --disable-option-checking '--prefix=/home/thd/development/rtems/install_path_test1' '--host=x86_64-pc-linux-gnu' '--build=x86_64-pc-linux-gnu' '--enable-rtemsbsp=erc32' '--enable-tests' '--target=sparc-rtems4.12' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=x86_64-pc-linux-gnu' 'target_alias=sparc-rtems4.12' --cache-file=/dev/null --srcdir=../../../../../rtems/tools/cpu/generic checking for gmake... no checking for make... make checking for RTEMS Version... 4.11.99.0 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... sparc-unknown-rtems4.12 checking rtems target cpu... sparc checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for bash... /bin/bash checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating size_rtems configure: configuring in ./testsuites/tools configure: running /bin/sh '../../../../rtems/testsuites/tools/configure' '--prefix=/home/thd/development/rtems/install_path_test1' '--host=x86_64-pc-linux-gnu' '--build=x86_64-pc-linux-gnu' '--enable-rtemsbsp=erc32' '--enable-tests' '--target=sparc-rtems4.12' '--cache-file=/dev/null' '--srcdir=../../../../rtems/testsuites/tools' checking for gmake... no checking for make... make checking for RTEMS Version... 4.11.99.0 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... sparc-unknown-rtems4.12 checking rtems target cpu... sparc checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile === configuring in generic (/home/thd/development/rtems/src/builds/erc32_test1/testsuites/tools/generic) configure: running /bin/sh ../../../../../rtems/testsuites/tools/generic/configure --disable-option-checking '--prefix=/home/thd/development/rtems/install_path_test1' '--host=x86_64-pc-linux-gnu' '--build=x86_64-pc-linux-gnu' '--enable-rtemsbsp=erc32' '--enable-tests' '--target=sparc-rtems4.12' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=x86_64-pc-linux-gnu' 'target_alias=sparc-rtems4.12' --cache-file=/dev/null --srcdir=../../../../../rtems/testsuites/tools/generic checking for gmake... no checking for make... make checking for RTEMS Version... 4.11.99.0 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... sparc-unknown-rtems4.12 checking rtems target cpu... sparc checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for bash... /bin/bash checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating difftest config.status: creating sorttimes configure: configuring in sparc-rtems4.12/c configure: running /bin/sh '../../../../rtems/c/configure' '--prefix=/home/thd/development/rtems/install_path_test1' '--host=sparc-rtems4.12' '--build=x86_64-pc-linux-gnu' '--target=sparc-rtems4.12' '--enable-rtemsbsp=erc32' '--enable-tests' '--with-target-subdir=sparc-rtems4.12' '--exec-prefix=/home/thd/development/rtems/install_path_test1/sparc-rtems4.12' '--includedir=/home/thd/development/rtems/install_path_test1/sparc-rtems4.12/include' '--cache-file=/dev/null' '--srcdir=../../../../rtems/c' checking for gmake... no checking for make... make checking for RTEMS Version... 4.11.99.0 checking build system type... x86_64-pc-linux-gnu checking host system type... sparc-unknown-rtems4.12 checking target system type... sparc-unknown-rtems4.12 checking rtems target cpu... sparc checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for sparc-rtems4.12-strip... sparc-rtems4.12-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile target architecture: sparc. available BSPs: erc32. 'make all' will build the following BSPs: erc32. other BSPs can be built with 'make RTEMS_BSP="bsp1 bsp2 ..."' config.status: creating Makefile Thank you, Tanu Hari Dixit. On Sat, Feb 4, 2017 at 9:26 PM, Kirspel, Kevin <kevin-kirs...@idexx.com> wrote: > I don’t have the spac toolset so I cannot test your situation. However, > can you post the output of your configure? I want to make sure it found > the erc32 BSP. > > > > Kevin Kirspel > > Electrical Engineer - Sr. Staff > > Idexx Roswell > > 235 Hembree Park Drive > > Roswell GA 30076 > > Tel: (770)-510-4444 ext. 81642 > > Direct: (770)-688-1642 > > Fax: (770)-510-4445 > > > > *From:* Tanu Hari Dixit [mailto:tokencol...@gmail.com] > *Sent:* Saturday, February 04, 2017 10:27 AM > *To:* Kuan Hsun Chen <kuan-hsun.c...@tu-dortmund.de> > *Cc:* rtems-de...@rtems.org <devel@rtems.org>; Kirspel, Kevin < > kevin-kirs...@idexx.com> > *Subject:* Re: Regarding running one test > > > > Hi Kevin, Kuan-Hsun, > > Thank you for the answer. > > I have run into a problem before trying the above solutions for myself, > while updating my local copy of the rtems repository with upstream with > "git pull". > > After I updated the local copy, I built the sparc toolset with > > ../source-builder/sb-set-builder --log=l-sparc-test.txt > --prefix=$HOME/development/rtems/4.12 4.12/rtems-sparc > > Then I ran ./bootstrap -c && ./bootstrap -p && ./bootstrap so as to > bootstrap. > > Then from builds/erc32_test(subdirectory) I ran > thd@thd-Inspiron-5537:~/development/rtems/src/rtems$ > ../../rtems/configure --target=sparc-rtems4.12 --enable-rtemsbsp=erc32 > --enable-tests --prefix=${HOME}/development/rtems/install_path_test > > And when I ran make, It showed the following error; > > make[2]: Leaving directory `/home/thd/development/rtems/ > src/builds/erc32_test/tools/build' > make[1]: Leaving directory `/home/thd/development/rtems/ > src/builds/erc32_test/tools/build' > Making all in tools/cpu > make[1]: Entering directory `/home/thd/development/rtems/ > src/builds/erc32_test/tools/cpu' > Making all in generic > make[2]: Entering directory `/home/thd/development/rtems/ > src/builds/erc32_test/tools/cpu/generic' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/home/thd/development/rtems/ > src/builds/erc32_test/tools/cpu/generic' > make[2]: Entering directory `/home/thd/development/rtems/ > src/builds/erc32_test/tools/cpu' > make[2]: Nothing to be done for `all-am'. > make[2]: Leaving directory `/home/thd/development/rtems/ > src/builds/erc32_test/tools/cpu' > make[1]: Leaving directory `/home/thd/development/rtems/ > src/builds/erc32_test/tools/cpu' > Making all in testsuites/tools > make[1]: Entering directory `/home/thd/development/rtems/ > src/builds/erc32_test/testsuites/tools' > Making all in generic > make[2]: Entering directory `/home/thd/development/rtems/ > src/builds/erc32_test/testsuites/tools/generic' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/home/thd/development/rtems/ > src/builds/erc32_test/testsuites/tools/generic' > make[2]: Entering directory `/home/thd/development/rtems/ > src/builds/erc32_test/testsuites/tools' > make[2]: Nothing to be done for `all-am'. > make[2]: Leaving directory `/home/thd/development/rtems/ > src/builds/erc32_test/testsuites/tools' > make[1]: Leaving directory `/home/thd/development/rtems/ > src/builds/erc32_test/testsuites/tools' > Making all in sparc-rtems4.12/c > make[1]: Entering directory `/home/thd/development/rtems/ > src/builds/erc32_test/sparc-rtems4.12/c' > Making all in . > make[2]: Entering directory `/home/thd/development/rtems/ > src/builds/erc32_test/sparc-rtems4.12/c' > make[2]: Nothing to be done for `all-am'. > make[2]: Leaving directory `/home/thd/development/rtems/ > src/builds/erc32_test/sparc-rtems4.12/c' > Making all in erc32 > make[2]: Entering directory `/home/thd/development/rtems/ > src/builds/erc32_test/sparc-rtems4.12/c/erc32' > make[2]: *** No rule to make target `all'. Stop. > make[2]: Leaving directory `/home/thd/development/rtems/ > src/builds/erc32_test/sparc-rtems4.12/c/erc32' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/home/thd/development/rtems/ > src/builds/erc32_test/sparc-rtems4.12/c' > make: *** [all-recursive] Error 1 > > I have ran into this problem more than once. When last time this happened, > I thought I must have messed up somewhere in the git (or rtems) workflow > and hence decided to make a clean clone of the rtems repo and continue with > it. I also tried git reset --hard <hash-number> last time and had no luck. > > Right now, I did not do a hard reset and currently git reflog shows the > following output: > 239dd35 HEAD@{0}: pull: Fast-forward > ffa885a HEAD@{1}: clone: from git://git.rtems.org/rtems.git > <https://urldefense.proofpoint.com/v2/url?u=http-3A__git.rtems.org_rtems.git&d=DwMFaQ&c=2do6VJGs3LvEOe4OFFM1bA&r=HDiJ93ANMEQ32G5JGdpyUxbdebuwKHBbeiHMr3RbR74&m=elBFGM7Up_H75tt-b3VbfyK1iPdyr-jmME-Ab4rL2hk&s=ryMs7_iFDreSyA8ad3iXqtVo0QByXEG61ZeaU1r6J4A&e=> > > git status shows > > thd@thd-Inspiron-5537:~/development/rtems/src/rtems$ git status > On branch master > Your branch is up-to-date with 'origin/master'. > > Changes not staged for commit: > (use "git add <file>..." to update what will be committed) > (use "git checkout -- <file>..." to discard changes in working directory) > > modified: c/src/lib/libbsp/powerpc/acinclude.m4 > > no changes added to commit (use "git add" and/or "git commit -a") > > > > I don't know what I am missing. Do I need to do something before pulling > from upstream? How do I rectify this? Please help me with this. > > Thank you, > > Tanu Hari Dixit. > > > > > > On Sat, Feb 4, 2017 at 6:47 PM, Kuan Hsun Chen < > kuan-hsun.c...@tu-dortmund.de> wrote: > > Or alternatively you can prepare simulator like qemu to executed each of > it after compiling the source tree. > Like this in testsuites/hello/: > > 1. qemu-system-arm -no-reboot -nographic -M realview-pbx-a9 -m 256M -kernel > \ > > 2. hello.exe -smp 4 > > > > Best, > > Kuan-Hsun > > > > 2017-02-04 14:12 GMT+01:00 Kirspel, Kevin <kevin-kirs...@idexx.com>: > > I use the rtems tester. ftp://ftp.rtems.org/pub/rtems/ > people/chrisj/rtems-tester/rtems-tester.html > <https://urldefense.proofpoint.com/v2/url?u=ftp-3A__ftp.rtems.org_pub_rtems_people_chrisj_rtems-2Dtester_rtems-2Dtester.html&d=DwMFaQ&c=2do6VJGs3LvEOe4OFFM1bA&r=HDiJ93ANMEQ32G5JGdpyUxbdebuwKHBbeiHMr3RbR74&m=elBFGM7Up_H75tt-b3VbfyK1iPdyr-jmME-Ab4rL2hk&s=Gv6QEbMGt88773MgovVmHykfnOxbLOP5J32IzwNVNEc&e=> > > Kevin Kirspel > Electrical Engineer - Sr. Staff > Idexx Roswell > 235 Hembree Park Drive > Roswell GA 30076 > Tel: (770)-510-4444 ext. 81642 > Direct: (770)-688-1642 > Fax: (770)-510-4445 > > -----Original Message----- > From: devel [mailto:devel-boun...@rtems.org] On Behalf Of Tanu Hari Dixit > Sent: Saturday, February 04, 2017 12:23 AM > To: rtems-de...@rtems.org <devel@rtems.org> > Subject: Regarding running one test > > Hello all, > > How do I run a single test from the testsuites? I want to run one test > from the rtems/testsuites/fstests. How do I go about doing that? > > Regards, > Tanu Hari Dixit. > _______________________________________________ > devel mailing list > devel@rtems.org > https://urldefense.proofpoint.com/v2/url?u=http-3A__lists. > rtems.org_mailman_listinfo_devel&d=DwICAg&c=2do6VJGs3LvEOe4OFFM1bA&r= > HDiJ93ANMEQ32G5JGdpyUxbdebuwKHBbeiHMr3RbR74&m=zH4W9XS8- > wD5iyDXdo5SEtjZwr3gbIp9TJjx8-z2cS8&s=mU8IyO6GG8v94eNhQoI76FuuhiadOC > FEoiJ3HdxyrrQ&e= > > _______________________________________________ > devel mailing list > devel@rtems.org > > http://lists.rtems.org/mailman/listinfo/devel > <https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.rtems.org_mailman_listinfo_devel&d=DwMFaQ&c=2do6VJGs3LvEOe4OFFM1bA&r=HDiJ93ANMEQ32G5JGdpyUxbdebuwKHBbeiHMr3RbR74&m=elBFGM7Up_H75tt-b3VbfyK1iPdyr-jmME-Ab4rL2hk&s=2TitOf1dwrWdEOQH2NpO_av9kjH_jPk9KJdkJUNk2Js&e=> > > > > > > -- > > M.Sc. Kuan-Hsun Chen > > TU Dortmund > Department of Computer Science 12 > Design Automation of Embedded Systems > Otto-Hahn-Strasse 16, Room 102 > > 44227 Dortmund > Germany > > Phone: *+49 231 755 6124* > Mail: kuan-hsun.c...@tu-dortmund.de > > >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel