On 18 March 2018 at 06:51, Vijay Kumar Banerjee <vijaykumar9...@gmail.com> wrote:
> I guess I couldn't understand properly what you're suggesting , > on the basis of what I understood , > I have set the PATH like this > /usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/home/luna > tic/.local/bin:/home/lunatic/bin > I think this is about Joel's comment, it should go in the other thread for that issue. That is what he meant so it must be something else then. > > I'm still getting the same error > > > -- vijay > > On 17 March 2018 at 20:24, Joel Sherrill <j...@rtems.org> wrote: > >> My guess on the build error is that the automake version used by RTEMS is >> very old and may not produce output for --help that help2man can parse. >> >> Try building qemu from the RSB without the RTEMS tools in your PATH. >> >> If Couverture has been updated to a recent enough version of the upstream >> qemu, then it is likely to fail the same way. >> >> --joel >> >> On Mar 17, 2018 9:46 AM, "Vijay Kumar Banerjee" <vijaykumar9...@gmail.com> >> wrote: >> >>> I built it manually >>> >>> the environment variable PATH looks like this >>> /home/lunatic/qemu/install/bin:/home/lunatic/development/rte >>> ms/5/bin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/ >>> home/lunatic/.local/bin:/home/lunatic/bin >>> >>> I tried to run rtems-test again without --coverage , it gives the same >>> result >>> I have attached the log. >>> >>> -- vijay >>> >>> On 17 March 2018 at 00:55, Cillian O'Donnell <cpodonne...@gmail.com> >>> wrote: >>> >>>> Yes this is something more than my build, I'll need someone a bit more >>>> expert in the RSB to step in there. In the meantime, lets just build >>>> couverture-qemu manually so we can see is everything else working. >>>> >>>> git clone https://github.com/AdaCore/qemu >>>> >>>> cd qemu >>>> >>>> ./configure --target-list=sparc-softmmu --prefix=$HOME/qemu/install >>>> --disable-docs --disable-virtfs --disable-werror >>>> >>>> make >>>> >>>> make install >>>> >>>> then add the prefix to $PATH in .bashrc as well like before. >>>> >>>> export PATH=$HOME/qemu/install/bin:$PATH >>>> >>>> Then run rtem-test and see what happens >>>> >>>> >>>> On 16 March 2018 at 19:13, Vijay Kumar Banerjee < >>>> vijaykumar9...@gmail.com> wrote: >>>> >>>>> the same error comes when I try to build qemu from the >>>>> RTEMS/rtems-source-builder as well >>>>> >>>>> is the issue coming from my system ? I'm using fedora 27 64bit >>>>> >>>>> On 17 Mar 2018 12:39 a.m., "Vijay Kumar Banerjee" < >>>>> vijaykumar9...@gmail.com> wrote: >>>>> >>>>>> yes , the same thing happens >>>>>> >>>>>> On 17 Mar 2018 12:13 a.m., "Cillian O'Donnell" <cpodonne...@gmail.com> >>>>>> wrote: >>>>>> >>>>>>> If you build regular qemu with the RSB, does the same thing happen? >>>>>>> >>>>>>> Try >>>>>>> >>>>>>> ../source-builder/sb-set-builder --log=qemu_log.txt >>>>>>> --prefix=$HOME/development/5 devel/qemu >>>>>>> >>>>>>> >>>>>>> On 16 March 2018 at 16:48, Vijay Kumar Banerjee < >>>>>>> vijaykumar9...@gmail.com> wrote: >>>>>>> >>>>>>>> still the same error >>>>>>>> >>>>>>>> -- vijay >>>>>>>> >>>>>>>> On 16 March 2018 at 21:39, Cillian O'Donnell <cpodonne...@gmail.com >>>>>>>> > wrote: >>>>>>>> >>>>>>>>> Just checked and the build was failing because one of the patches >>>>>>>>> needed its hash to be updated to sha256. Just pushed that change. The >>>>>>>>> build >>>>>>>>> finishes successfully on my end. Pull that change into >>>>>>>>> couverture-build >>>>>>>>> branch and try it again. I'm not seeing any automake stuff here, so >>>>>>>>> just >>>>>>>>> check that and let me know. >>>>>>>>> >>>>>>>>> On 16 March 2018 at 14:59, Vijay Kumar Banerjee < >>>>>>>>> vijaykumar9...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> building couverture-qemu from rtems-source-builder ( >>>>>>>>>> https://github.com/cillianodonnell/rtems-source-builder/tr >>>>>>>>>> ee/couverture-build ) >>>>>>>>>> gives error building auromake-1.12.6-x86_64-linux-gnu-1 . >>>>>>>>>> >>>>>>>>>> I have attached the error report . >>>>>>>>>> >>>>>>>>>> -- vijay >>>>>>>>>> >>>>>>>>>> On 15 March 2018 at 19:17, Cillian O'Donnell < >>>>>>>>>> cpodonne...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On 15 March 2018 at 12:26, Vijay Kumar Banerjee < >>>>>>>>>>> vijaykumar9...@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> It runs with a bunch of errors . I have attached the log file >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Ok, I'm guessing you didn't set up Couverture-Qemu (special >>>>>>>>>>> version of qemu designed for generating extra trace data for >>>>>>>>>>> coverage >>>>>>>>>>> analysis). That's what those errors are about. I have an RSB build >>>>>>>>>>> for that. >>>>>>>>>>> >>>>>>>>>>> https://github.com/cillianodonnell/rtems-source-builder/tree >>>>>>>>>>> /couverture-build >>>>>>>>>>> >>>>>>>>>>> and the instructions for building it are >>>>>>>>>>> >>>>>>>>>>> https://devel.rtems.org/wiki/GSoC/2017/coveragetools#Buildin >>>>>>>>>>> gCouverture-QemuwiththeRSB >>>>>>>>>>> >>>>>>>>>>> I know what the other problem is too. I have a specific >>>>>>>>>>> environment variable defined for the path, sorry I can't even >>>>>>>>>>> remember >>>>>>>>>>> putting it there, I thought that was automatically generated >>>>>>>>>>> (probably >>>>>>>>>>> should be, another thing to add to the list :)... ). So wherever >>>>>>>>>>> you stuck >>>>>>>>>>> the export path for where the rsb built the tools, in .bashrc or >>>>>>>>>>> whatever >>>>>>>>>>> you're using. Also put something like: >>>>>>>>>>> >>>>>>>>>>> export PATH=$HOME/development/rtems/5 >>>>>>>>>>> /bin:$PATH >>>>>>>>>>> export PATH=$HOME/development/rtems/t >>>>>>>>>>> est/rtems-tools/build/tester/covoar:$PATH >>>>>>>>>>> >>>>>>>>>>> or you could just copy covoar into the /bin directory with all >>>>>>>>>>> the other rsb tools gcc and all that, it'll find it either way. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- vijay >>>>>>>>>>>> >>>>>>>>>>>> On 15 March 2018 at 16:58, Cillian O'Donnell < >>>>>>>>>>>> cpodonne...@gmail.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Looks good. If you run the samples without coverage is >>>>>>>>>>>>> everything ok? >>>>>>>>>>>>> >>>>>>>>>>>>> So removing --coverage and tacking on /samples >>>>>>>>>>>>> >>>>>>>>>>>>> $HOME/development/rtems-tools/tester/rtems-test >>>>>>>>>>>>> --rtems-bsp=leon3-qemu --log=log-leon3.log >>>>>>>>>>>>> --rtems-tools=$HOME/development/rtems/5 >>>>>>>>>>>>> --rtems-builddir=$HOME/development/rtems/kernel/leon3 >>>>>>>>>>>>> sparc-rtems5/c/leon3/testsuites/samples >>>>>>>>>>>>> >>>>>>>>>>>>> Do the tests run? >>>>>>>>>>>>> >>>>>>>>>>>>> On 15 March 2018 at 10:53, Vijay Kumar Banerjee < >>>>>>>>>>>>> vijaykumar9...@gmail.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> I have attached the output of the ls of that directory >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- vijay >>>>>>>>>>>>>> >>>>>>>>>>>>>> On 15 March 2018 at 15:52, Cillian O'Donnell < >>>>>>>>>>>>>> cpodonne...@gmail.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On 15 March 2018 at 03:58, Vijay Kumar Banerjee < >>>>>>>>>>>>>>> vijaykumar9...@gmail.com> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> hello , >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> as told by Joel , I started this thread to further discuss >>>>>>>>>>>>>>>> the coverage analysis toolset . >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Current status is , I'm trying to builld and run rtems-test >>>>>>>>>>>>>>>> from the coverage-merge branch of the previous GSoC student >>>>>>>>>>>>>>>> Cillian . >>>>>>>>>>>>>>>> https://github.com/cillianodon >>>>>>>>>>>>>>>> nell/rtems-tools/tree/coverage-merge >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I'm getting an error that says . >>>>>>>>>>>>>>>> "Covoar not found !" >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> It's supposed to find it in rtems-tools/build/tester/covoar/ >>>>>>>>>>>>>>> If it's in there it should be fine. Can you show me the >>>>>>>>>>>>>>> contents of that >>>>>>>>>>>>>>> directory? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> cpod@cpod >>>>>>>>>>>>>>> ~/development/rtems/test/rtems-tools/build/tester/covoar >>>>>>>>>>>>>>> $ ls >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> the Covoar appeared in rtems-tools/tester/covoar . >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Vijay >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>> devel mailing list >>>>>>>>>>>>>>>> devel@rtems.org >>>>>>>>>>>>>>>> http://lists.rtems.org/mailman/listinfo/devel >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>> >>> >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel