Hi Xiaomin, Welcome to RTEMS.
On 16/12/20 6:08 am, Xiaomin (Jasmine) wrote: > Hi, there, > > I followed this article: > > https://devel.rtems.org/wiki/Boards/Zynq%20-%20Zedboard > <https://devel.rtems.org/wiki/Boards/Zynq%20-%20Zedboard> > > for development. It basically gets the boot img file from a tftp server. It > worked very well for me. > > Now I am done with the development. I'd like to boot with my image file on the > SD card itself, not getting the img file through tftp anymore. > > How should I modify the uenv.txt file to do that? I am sorry I do not have the exact command you need, it depends on the formatting used on the SD card. My approach to solving these types of problems is to boot the board and stop the boot early via the keyboard and then play with the uboot commands until I find something that works. This typically means being able to list the directory of the executable you want to run and then actually running it. Once you have those command you can place them in the uenv.txt config file. I hope this helps. Chris _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel