Regarding the patch to add instructions on how to set up a patch message in which file should I create this patch or make changes?
On Mon, Mar 15, 2021 at 8:57 PM Gedare Bloom <ged...@rtems.org> wrote: > Hi Ida, > > On Mon, Mar 15, 2021 at 1:50 PM Gedare Bloom <ged...@rtems.org> wrote: > > > > Hi Ida, > > > > did you send the same set of patches twice, or are there changes > > between the two sets? > > > > Since I'm not quite sure what to look at here, please do me a favor > and send a new patchset with a -v2 indicator [1], and also set the > patch message to specify rtems-docs. git format patch supports to set > the prefix with: > git format-patch HEAD^ --subject-prefix="PATCH rtems-docs" > You can also create an alias to make this simpler [2]. In fact, if you > can send a patch to add instructions how to set up patch message with > the repo name to the text at [1] that would be another nice > contribution :) > > [1] > https://docs.rtems.org/branches/master/eng/vc-users.html#creating-a-patch > [2] https://lists.rtems.org/pipermail/devel/2020-April/059308.html > > Thank you, > Gedare > > > On Sun, Mar 14, 2021 at 8:26 PM Ida Delphine <idad...@gmail.com> wrote: > > > > > > --- > > > user/start/app.rst | 104 ++++++++++++++++++++++----------------------- > > > 1 file changed, 52 insertions(+), 52 deletions(-) > > > > > > diff --git a/user/start/app.rst b/user/start/app.rst > > > index 8900f78..c343551 100644 > > > --- a/user/start/app.rst > > > +++ b/user/start/app.rst > > > @@ -8,7 +8,7 @@ Build Your Application > > > ====================== > > > > > > You tested a BSP in the previous section. We built the ``erc32`` BSP > > > -and it is installed under :file:`$HOME/quick-start/rtems/5`. > > > +and it is installed under :file:`$HOME/quick-start/rtems/6`. > > > > > > We will now create a simple Hello World application with a Git > > > repository and using the `Waf <https://waf.io>`_ build system. > > > @@ -107,7 +107,7 @@ and copy the Waf script: > > > # > > > from __future__ import print_function > > > > > > - rtems_version = "5" > > > + rtems_version = "6" > > > > > > try: > > > import rtems_waf.rtems as rtems > > > @@ -142,52 +142,52 @@ Configure the application using Waf's > ``configure`` command: > > > > > > .. code-block:: none > > > > > > - ./waf configure --rtems=$HOME/quick-start/rtems/5 > --rtems-bsp=sparc/erc32 > > > + ./waf configure --rtems=$HOME/quick-start/rtems/6 > --rtems-bsp=sparc/erc32 --rtems-version=6 > > > > > > The output will be something close to: > > > > > > .. code-block:: none > > > > > > - Setting top to : $BASE/app/hello > > > - Setting out to : $BASE/app/hello/build > > > - RTEMS Version : 5 > > > - Architectures : sparc-rtems5 > > > - Board Support Package (BSP) : sparc-rtems5-erc32 > > > - Show commands : no > > > - Long commands : no > > > - Checking for program 'sparc-rtems5-gcc' : > $BASE/rtems/5/bin/sparc-rtems5-gcc > > > - Checking for program 'sparc-rtems5-g++' : > $BASE/rtems/5/bin/sparc-rtems5-g++ > > > - Checking for program 'sparc-rtems5-gcc' : > $BASE/rtems/5/bin/sparc-rtems5-gcc > > > - Checking for program 'sparc-rtems5-ld' : > $BASE/rtems/5/bin/sparc-rtems5-ld > > > - Checking for program 'sparc-rtems5-ar' : > $BASE/rtems/5/bin/sparc-rtems5-ar > > > - Checking for program 'sparc-rtems5-nm' : > $BASE/rtems/5/bin/sparc-rtems5-nm > > > - Checking for program 'sparc-rtems5-objdump' : > $BASE/rtems/5/bin/sparc-rtems5-objdump > > > - Checking for program 'sparc-rtems5-objcopy' : > $BASE/rtems/5/bin/sparc-rtems5-objcopy > > > - Checking for program 'sparc-rtems5-readelf' : > $BASE/rtems/5/bin/sparc-rtems5-readelf > > > - Checking for program 'sparc-rtems5-strip' : > $BASE/rtems/5/bin/sparc-rtems5-strip > > > - Checking for program 'sparc-rtems5-ranlib' : > $BASE/rtems/5/bin/sparc-rtems5-ranlib > > > - Checking for program 'rtems-ld' : > $BASE/rtems/5/bin/rtems-ld > > > - Checking for program 'rtems-tld' : > $BASE/rtems/5/bin/rtems-tld > > > - Checking for program 'rtems-syms' : > $BASE/rtems/5/bin/rtems-syms > > > - Checking for program 'rtems-bin2c' : > $BASE/rtems/5/bin/rtems-bin2c > > > - Checking for program 'tar' : /usr/bin/tar > > > - Checking for program 'gcc, cc' : > $BASE/rtems/5/bin/sparc-rtems5-gcc > > > - Checking for program 'ar' : > $BASE/rtems/5/bin/sparc-rtems5-ar > > > - Checking for program 'g++, c++' : > $BASE/rtems/5/bin/sparc-rtems5-g++ > > > - Checking for program 'ar' : > $BASE/rtems/5/bin/sparc-rtems5-ar > > > - Checking for program 'gas, gcc' : > $BASE/rtems/5/bin/sparc-rtems5-gcc > > > - Checking for program 'ar' : > $BASE/rtems/5/bin/sparc-rtems5-ar > > > - Checking for c flags '-MMD' : yes > > > - Checking for cxx flags '-MMD' : yes > > > - Compiler version (sparc-rtems5-gcc) : 7.5.0 20191114 > (RTEMS 5, RSB 5.1.0, Newlib fbaa096) > > > - Checking for a valid RTEMS BSP installation : yes > > > - Checking for RTEMS_DEBUG : no > > > - Checking for RTEMS_MULTIPROCESSING : no > > > - Checking for RTEMS_NEWLIB : yes > > > - Checking for RTEMS_POSIX_API : yes > > > - Checking for RTEMS_SMP : no > > > - Checking for RTEMS_NETWORKING : no > > > - 'configure' finished successfully (0.686s) > > > + Setting top to : $BASE/app/hello > > > + Setting out to : $BASE/app/hello/build > > > + RTEMS Version : 6 > > > + Architectures : sparc-rtems6 > > > + Board Support Package (BSP) : sparc-rtems6-erc32 > > > + Show commands : no > > > + Long commands : no > > > + Checking for program 'sparc-rtems6-gcc' : > $BASE/rtems/6/bin/sparc-rtems6-gcc > > > + Checking for program 'sparc-rtems6-g++' : > $BASE/rtems/6/bin/sparc-rtems6-g++ > > > + Checking for program 'sparc-rtems6-gcc' : > $BASE/rtems/6/bin/sparc-rtems6-gcc > > > + Checking for program 'sparc-rtems6-ld' : > $BASE/rtems/6/bin/sparc-rtems6-ld > > > + Checking for program 'sparc-rtems6-ar' : > $BASE/rtems/6/bin/sparc-rtems6-ar > > > + Checking for program 'sparc-rtems6-nm' : > $BASE/rtems/6/bin/sparc-rtems6-nm > > > + Checking for program 'sparc-rtems6-objdump' : > $BASE/rtems/6/bin/sparc-rtems6-objdump > > > + Checking for program 'sparc-rtems6-objcopy' : > $BASE/rtems/6/bin/sparc-rtems6-objcopy > > > + Checking for program 'sparc-rtems6-readelf' : > $BASE/rtems/6/bin/sparc-rtems6-readelf > > > + Checking for program 'sparc-rtems6-strip' : > $BASE/rtems/6/bin/sparc-rtems6-strip > > > + Checking for program 'sparc-rtems6-ranlib' : > $BASE/rtems/6/bin/sparc-rtems6-ranlib > > > + Checking for program 'rtems-ld' : > $BASE/rtems/6/bin/rtems-ld > > > + Checking for program 'rtems-tld' : > $BASE/rtems/6/bin/rtems-tld > > > + Checking for program 'rtems-syms' : > $BASE/rtems/6/bin/rtems-syms > > > + Checking for program 'rtems-bin2c' : > $BASE/rtems/6/bin/rtems-bin2c > > > + Checking for program 'tar' : /usr/bin/tar > > > + Checking for program 'gcc, cc' : > $BASE/rtems/6/bin/sparc-rtems6-gcc > > > + Checking for program 'ar' : > $BASE/rtems/6/bin/sparc-rtems6-ar > > > + Checking for program 'g++, c++' : > $BASE/rtems/6/bin/sparc-rtems6-g++ > > > + Checking for program 'ar' : > $BASE/rtems/6/bin/sparc-rtems6-ar > > > + Checking for program 'gas, gcc' : > $BASE/rtems/6/bin/sparc-rtems6-gcc > > > + Checking for program 'ar' : > $BASE/rtems/6/bin/sparc-rtems6-ar > > > + Checking for c flags '-MMD' : yes > > > + Checking for cxx flags '-MMD' : yes > > > + Compiler version (sparc-rtems6-gcc) : 10.2.1 20210309 > (RTEMS 6, RSB 5e449fb5c2cb6812a238f9f9764fd339cbbf05c2, Newlib d10d0d9) > > > + Checking for a valid RTEMS BSP installation : yes > > > + Checking for RTEMS_DEBUG : no > > > + Checking for RTEMS_MULTIPROCESSING : no > > > + Checking for RTEMS_NEWLIB : yes > > > + Checking for RTEMS_POSIX_API : no > > > + Checking for RTEMS_SMP : no > > > + Checking for RTEMS_NETWORKING : no > > > + 'configure' finished successfully (1.142s) > > > > > > Build the application: > > > > > > @@ -199,24 +199,24 @@ The output will be something close to: > > > > > > .. code-block:: none > > > > > > - Waf: Entering directory `$BASE/app/hello/build/sparc-rtems5-erc32' > > > + Waf: Entering directory `$BASE/app/hello/build/sparc-rtems6-erc32' > > > [1/3] Compiling init.c > > > [2/3] Compiling hello.c > > > - [3/3] Linking build/sparc-rtems5-erc32/hello.exe > > > - Waf: Leaving directory `$BASE/app/hello/build/sparc-rtems5-erc32' > > > - 'build-sparc-rtems5-erc32' finished successfully (0.183s) > > > + [3/3] Linking build/sparc-rtems6-erc32/hello.exe > > > + Waf: Leaving directory `$BASE/app/hello/build/sparc-rtems6-erc32' > > > + 'build-sparc-rtems6-erc32' finished successfully (0.183s) > > > > > > Run the executable: > > > > > > .. code-block:: none > > > > > > - $HOME/quick-start/rtems/5/bin/rtems-run --rtems-bsps=erc32-sis > build/sparc-rtems5-erc32/hello.exe > > > + $HOME/quick-start/rtems/6/bin/rtems-run --rtems-bsps=erc32-sis > build/sparc-rtems6-erc32/hello.exe > > > > > > The output will be something close to: > > > > > > .. code-block:: none > > > > > > - RTEMS Testing - Run, 5.1.0 > > > + RTEMS Testing - Run, 6 > > > Command Line: $BASE/rtems/5/bin/rtems-run --rtems-bsps=erc32-sis > build/sparc-rtems5-erc32/hello.exe > > > Host: FreeBSD hihi 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 > GENERIC amd64 > > > Python: 3.7.6 (default, Jan 30 2020, 01:18:54) [Clang 6.0.1 > (tags/RELEASE_601/final 335540)] > > > @@ -232,10 +232,10 @@ The output will be something close to: > > > Hello World > > > > > > *** FATAL *** > > > - fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT) > > > + fatal source: 6 (RTEMS_FATAL_SOURCE_EXIT) > > > fatal code: 0 (0x00000000) > > > - RTEMS version: 5.1.0 > > > - RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB 5.1.0, Newlib fbaa096) > > > + RTEMS version: 6 > > > + RTEMS tools: 7.5.0 20191114 (RTEMS 6, RSB 6, Newlib fbaa096) > > > executing thread ID: 0x08a010001 > > > executing thread name: UI1 > > > cpu 0 in error mode (tt = 0x101) > > > -- > > > 2.25.1 > > > > > > _______________________________________________ > > > devel mailing list > > > devel@rtems.org > > > http://lists.rtems.org/mailman/listinfo/devel >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
