I ran the commands and copied and pasted wherever there were mismatches especially with respect to the version numbers.
Should I resend the patchset with a better commit message? On Tue, 16 Mar 2021, 6:50 pm Gedare Bloom, <ged...@rtems.org> wrote: > Hi Ida, > > Since the patches now indicate rtems-docs, you don't need to include > that in the commit message. Instead, it is recommended to put the > manual directory name that is modified as the first part of the > commit, e.g., "user: bump version 5 to 6 in start/tools.rst" > > More below: > > On Tue, Mar 16, 2021 at 2:16 AM Ida Delphine <idad...@gmail.com> wrote: > > > > Edit edit sample output of tool suite installation. > > Edit command to check if C cross compiler works and sample output of > this command. > > --- > > user/start/tools.rst | 26 +++++++++++++------------- > > 1 file changed, 13 insertions(+), 13 deletions(-) > > > > diff --git a/user/start/tools.rst b/user/start/tools.rst > > index baa2387..9a915ab 100644 > > --- a/user/start/tools.rst > > +++ b/user/start/tools.rst > > @@ -12,7 +12,7 @@ Install the Tool Suite > > > > You have chosen an installation prefix, the BSP to build, the tool's > > architecure and prepared the source for the RSB in the previous > sections. We > > -have chosen :file:`$HOME/quick-start/rtems/5` as the installation > prefix, the > > +have chosen :file:`$HOME/quick-start/rtems/6` as the installation > prefix, the > > ``erc32`` BSP and the SPARC architecture name of ``sparc-rtems5``, and > unpacked > > the RSB source in :file:`$HOME/quick-start/src`. > > > > @@ -25,7 +25,7 @@ Build and install the tool suite: > > .. code-block:: none > > > > cd $HOME/quick-start/src/rsb/rtems > > - ../source-builder/sb-set-builder --prefix=$HOME/quick-start/rtems/5 > 5/rtems-sparc > > + ../source-builder/sb-set-builder --prefix=$HOME/quick-start/rtems/6 > 6/rtems-sparc > > > > This command should output something like this (omitted lines are > denoted by > > ...). The build host appears as part of the name of the package being > > @@ -33,19 +33,19 @@ built. The name you see may vary depending on the > host you are using: > > > > .. code-block:: none > > > > - RTEMS Source Builder - Set Builder, 5.1.0 > > - Build Set: 5/rtems-sparc > > + RTEMS Source Builder - Set Builder, 6 > > + Build Set: 6/rtems-sparc > > ... > > config: tools/rtems-binutils-2.34.cfg > > - package: sparc-rtems5-binutils-2.34-x86_64-freebsd12.1-1 > > - building: sparc-rtems5-binutils-2.34-x86_64-freebsd12.1-1 > > - sizes: sparc-rtems5-binutils-2.34-x86_64-freebsd12.1-1: 305.866MB > (installed: 29.966MB) > > - cleaning: sparc-rtems5-binutils-2.34-x86_64-freebsd12.1-1 > > + package: sparc-rtems6=-binutils-2.34-x86_64-freebsd12.1-1 > > + building: sparc-rtems6-binutils-2.34-x86_64-freebsd12.1-1 > > + sizes: sparc-rtems6-binutils-2.34-x86_64-freebsd12.1-1: 305.866MB > (installed: 29.966MB) > > + cleaning: sparc-rtems6-binutils-2.34-x86_64-freebsd12.1-1 > > reporting: tools/rtems-binutils-2.34.cfg -> > sparc-rtems5-binutils-2.34-x86_64-freebsd12.1-1.txt > > reporting: tools/rtems-binutils-2.34.cfg -> > sparc-rtems5-binutils-2.34-x86_64-freebsd12.1-1.xml > > config: tools/rtems-gcc-7.5.0-newlib-fbaa096.cfg > > - package: sparc-rtems5-gcc-7.5.0-newlib-fbaa096-x86_64-freebsd12.1-1 > > - building: sparc-rtems5-gcc-7.5.0-newlib-fbaa096-x86_64-freebsd12.1-1 > > + package: sparc-rtems6-gcc-7.5.0-newlib-fbaa096-x86_64-freebsd12.1-1 > > + building: sparc-rtems6-gcc-7.5.0-newlib-fbaa096-x86_64-freebsd12.1-1 > > .... > > Build Sizes: usage: 5.684GB total: 1.112GB (sources: 143.803MB, > patches: 21.348KB, installed 995.188MB) > > Build Set: Time 0:21:35.626294 > > Did you run the command and capture the sample output, or do you edit > the sample output manually? > > It would be better to copy-paste the actual sample output. Making this > version change update automatic could be a nice small scripting > exercise. > > > @@ -55,7 +55,7 @@ works with the following command: > > > > .. code-block:: none > > > > - $HOME/quick-start/rtems/5/bin/sparc-rtems5-gcc --version > > + $HOME/quick-start/rtems/6/bin/sparc-rtems6-gcc --version > > > > This command should output something like below. The version > informtion helps > Unrelated, but can you fix this typo: information > > > you to identify the exact sources used to build the cross compiler of > your > > @@ -69,8 +69,8 @@ source code used. > > > > .. code-block:: none > > > > - sparc-rtems5-gcc (GCC) 7.5.0 20191114 (RTEMS 5, RSB 5.1.0, Newlib > fbaa096) > > - Copyright (C) 2017 Free Software Foundation, Inc. > > + sparc-rtems6-gcc (GCC) 10.2.1 20210309 (RTEMS 6, RSB > 5e449fb5c2cb6812a238f9f9764fd339cbbf05c2, Newlib d10d0d9) > > + Copyright (C) 2020 Free Software Foundation, Inc. > > This is free software; see the source for copying conditions. > There is NO > > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR > PURPOSE. > > > > -- > > 2.25.1 > > > > _______________________________________________ > > devel mailing list > > devel@rtems.org > > http://lists.rtems.org/mailman/listinfo/devel >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel