From: till straumann <till.straum...@alumni.tu-berlin.de>

Update #4344
---
 bsps/powerpc/beatnik/net/if_mve/mv643xx_eth_bsdnet.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/bsps/powerpc/beatnik/net/if_mve/mv643xx_eth_bsdnet.c 
b/bsps/powerpc/beatnik/net/if_mve/mv643xx_eth_bsdnet.c
index f8400c9f13..0f2a97d49a 100644
--- a/bsps/powerpc/beatnik/net/if_mve/mv643xx_eth_bsdnet.c
+++ b/bsps/powerpc/beatnik/net/if_mve/mv643xx_eth_bsdnet.c
@@ -168,9 +168,6 @@
  *              chains that are longer than the ring size. Normally, this is
  *              disabled for sake of speed.
  *              I observed chains of >17 entries regularly!
- *
- *       Also, TX_NUM_TAG_SLOTS (1) must be left empty as a marker, hence
- *       the ring size must be > max. #frags + 1.
  */
 #define MV643XX_TX_RING_SIZE   200     /* these are smaller fragments and not 
occupied when
                                                                         * the 
driver is idle.
@@ -207,7 +204,6 @@
 #if    PPC_CACHE_ALIGMENT != 16 && PPC_CACHE_ALIGNMENT != 32
 #error "Cache line size must be 16 or 32"
 #else
-#define RING_ALIGNMENT                         PPC_CACHE_ALIGNMENT
 #define RX_BUF_ALIGNMENT                       PPC_CACHE_ALIGNMENT
 #endif
 
@@ -951,7 +947,7 @@ int                 avail;
                                        }
                                }
                                /* free tx chain */
-                               if ( (MV643XX_ETH_EXT_IRQ_TX_DONE & x) && 
(avail = BSP_mve_swipe_tx(sc->pvt)) > 0 ) {
+                               if ( (MV643XX_ETH_EXT_IRQ_TX_DONE & x) && 
((avail = BSP_mve_swipe_tx(sc->pvt)) > 0) ) {
                                        ifp->if_flags &= ~IFF_OACTIVE;
                                        if ( sc->bsd.tx_ring_size == avail )
                                                ifp->if_timer = 0;
-- 
2.26.2

_______________________________________________
devel mailing list
devel@rtems.org
http://lists.rtems.org/mailman/listinfo/devel

Reply via email to