I have tested it on the renode.io simulator and working fine.
Regards Padmarao > On Wed, 2023-03-15 at 22:04 -0400, Alan Cudmore wrote: > > Version 2 patch updates: Separated the device tree source and encoded > device tree blob into a separate patch, added the license text to > k210.h, eliminated whitespace warnings, and eliminated dead code in > the conditional compilation structure for the core_get_frequency > function in start/bspstart.c. > > This patch set adds the riscv/kendrytek210 BSP variant to support the > Kendryte K210 Dual Core RISC-V SoC. The BSP runs on the renode.io > simulator, the Sipeed MAiX BiT and MAiXDuino boards, and would likely > run on other boards. RTEMS binaries can be flashed to the boards > using > the kflash python utility available through the pip command. > Currently > the BSP supports the console UART which is shared with the > frdme310arty, > an interrupt controller, and timer. The included device tree source > just covers a minimal set of peripherals. The device tree can be > expanded as additional device support is addded. > Manufacturer, board links, and other information can be found in > ticket #4876. > > Documentation that describes how to build and run the BSP on the > boards and simulator has been prepared and will be submitted after > the bsp > is merged. > > The full testsuite has not been run on this BSP, but I run a > subset of the of testsuite on the renode.io robot test framework. > > Alan Cudmore (3): > bsps/riscv: add device tree source and device tree blob header for > k210 bsp variant > bsps/riscv: add riscv/kendrytek210 BSP variant source changes > spec: add riscv kendrytek210 variant build options > > bsps/riscv/riscv/config/kendrytek210.cfg | 9 + > bsps/riscv/riscv/console/console-config.c | 10 +- > bsps/riscv/riscv/console/fe310-uart.c | 2 +- > bsps/riscv/riscv/dts/kendryte-k210.dts | 216 ++++++++++++ > bsps/riscv/riscv/include/bsp.h | 4 + > bsps/riscv/riscv/include/bsp/k210.h | 105 ++++++ > .../riscv/include/bsp/kendryte-k210-dtb.h | 315 > ++++++++++++++++++ > bsps/riscv/riscv/include/bsp/riscv.h | 4 + > bsps/riscv/riscv/start/bspstart.c | 43 +++ > spec/build/bsps/optdtb.yml | 4 +- > spec/build/bsps/optdtbheaderpath.yml | 2 + > spec/build/bsps/optfdtuboot.yml | 3 + > spec/build/bsps/riscv/optramsize.yml | 2 + > spec/build/bsps/riscv/riscv/abi.yml | 1 + > .../bsps/riscv/riscv/bspkendrtyek210.yml | 19 ++ > spec/build/bsps/riscv/riscv/grp.yml | 4 + > spec/build/bsps/riscv/riscv/obj.yml | 1 + > .../bsps/riscv/riscv/optkendrytek210.yml | 18 + > spec/build/bsps/riscv/riscv/optns16550max.yml | 4 +- > spec/build/bsps/riscv/riscv/optsifiveuart.yml | 20 ++ > spec/build/cpukit/optsmp.yml | 1 + > 21 files changed, 779 insertions(+), 8 deletions(-) > create mode 100644 bsps/riscv/riscv/config/kendrytek210.cfg > create mode 100644 bsps/riscv/riscv/dts/kendryte-k210.dts > create mode 100644 bsps/riscv/riscv/include/bsp/k210.h > create mode 100644 bsps/riscv/riscv/include/bsp/kendryte-k210-dtb.h > create mode 100644 spec/build/bsps/riscv/riscv/bspkendrtyek210.yml > create mode 100644 spec/build/bsps/riscv/riscv/optkendrytek210.yml > create mode 100644 spec/build/bsps/riscv/riscv/optsifiveuart.yml > > -- > 2.25.1 > > _______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel