these doc patches ok. please use --subject-prefix to add repo tags in future. https://docs.rtems.org/branches/master/eng/vc-users.html#creating-a-patch
On Tue, Apr 4, 2023 at 9:01 AM Alex White <alex.wh...@oarcorp.com> wrote: > > --- > user/bsps/bsps-microblaze.rst | 29 ++++++++++++++++++++++++----- > 1 file changed, 24 insertions(+), 5 deletions(-) > > diff --git a/user/bsps/bsps-microblaze.rst b/user/bsps/bsps-microblaze.rst > index 2a8a6dd..864b3c8 100644 > --- a/user/bsps/bsps-microblaze.rst > +++ b/user/bsps/bsps-microblaze.rst > @@ -21,13 +21,21 @@ Clock Driver > ------------ > > The clock driver supports the QEMU emulated Xilinx AXI Timer v2.0. It is > -implemented as a simple downcounter. > +implemented as a simple downcounter. If device tree support is enabled in the > +build configuration, the clock driver will use the node that is compatible > with > +`xlnx,xps-timer-1.00.a` from the device tree to configure the clock. The > +following device tree node properties are used to configure the clock driver: > +``reg``, ``clock-frequency``, and ``interrupts``. > > Console Driver > -------------- > > The console driver supports the QEMU emulated Xilinx AXI UART Lite v2.0. It > is > -initialized to a baud rate of 115200. > +initialized to a baud rate of 115200. If device tree support is enabled in > the > +build configuration, the console driver will use the node that is compatible > +with `xlnx,xps-uartlite-1.00.a` from the device tree to configure the > console. > +The following device tree node properties are used to configure the console > +driver: ``reg``, ``status``, ``port-number``, and ``interrupts``. > > Network Driver > -------------- > @@ -68,7 +76,9 @@ The QSPI NOR JFFS2 driver supports the QEMU emulated > n25q512a11 QSPI NOR flash > device. It is initialized to a page size of 256 bytes and a sector size of 64 > KiB. If device tree support is enabled in the build configuration, the QSPI > NOR > JFFS2 driver will use the node that is compatible with `xlnx,xps-spi-2.00.a` > -from the device tree to configure the QSPI NOR JFFS2 driver. > +from the device tree to configure the QSPI NOR JFFS2 driver. The following > +device tree node properties are used to configure the QSPI NOR JFFS2 driver: > +``reg`` and ``interrupts``. > > > Running Executables > @@ -124,12 +134,21 @@ Clock Driver > ------------ > > The clock driver supports the Xilinx AXI Timer v2.0. It is implemented as a > -simple downcounter. > +simple downcounter. If device tree support is enabled in the > +build configuration, the clock driver will use the node that is compatible > with > +`xlnx,xps-timer-1.00.a` from the device tree to configure the clock. The > +following device tree node properties are used to configure the clock driver: > +``reg``, ``clock-frequency``, and ``interrupts``. > > Console Driver > -------------- > > -The console driver supports the Xilinx AXI UART Lite v2.0. > +The console driver supports the Xilinx AXI UART Lite v2.0. It is initialized > to > +a baud rate of 115200. If device tree support is enabled in the build > +configuration, the console driver will use the node that is compatible with > +`xlnx,xps-uartlite-1.00.a` from the device tree to configure the console. The > +following device tree node properties are used to configure the console > driver: > +``reg``, ``status``, ``port-number``, and ``interrupts``. > > Debugging > --------- > -- > 2.34.1 > > _______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel