Hi Chris, Yes they are the same. I thought there was an email error, so I re-send it twice.
On Tue, 27 Jun 2023, 07:46 Chris Johns, <chr...@rtems.org> wrote: > Hi Muhammad, > > The patch looks good, thanks. > > Are the 3 posted patches the same version? > > Chris > > On 26/6/2023 2:17 pm, Muhammad Sulthan Mazaya wrote: > > Patch for the implementation of renode on rtems-test. Currently, renode > > installation has not been implemented in rsb. Thus, for testing, you can > > install renode by referring to the documentation link below. > > > > Downloads for debian, fedora, arch, macOS, and windows: > > https://renode.io/#downloads > > > > Alternatively, you can access Renode's GitHub releases: > > https://github.com/renode/renode/releases/tag/v1.13.3 > > > > You can also build it from source: > > > https://renode.readthedocs.io/en/latest/advanced/building_from_sources.html#building-from-source > > > > This patch consists of changes to test kendrytek210 using renode. To > > test it, you can build the kendrytek210 test suite as instructed in the > > rtems-docs (Alan's patch here: > https://lists.rtems.org/pipermail/devel/2023-April/074838.html). > > Then, use the following command to run the test suite. > > > > rtems-test --rtems-bsp=kendrytek210-renode [test-suite-path] > > > > --- > > .../testing/bsps/kendrytek210-renode.ini | 38 +++++++++++ > > tester/rtems/testing/renode.cfg | 64 +++++++++++++++++++ > > .../testing/renode_scripts/kendrytek210.resc | 53 +++++++++++++++ > > 3 files changed, 155 insertions(+) > > create mode 100644 tester/rtems/testing/bsps/kendrytek210-renode.ini > > create mode 100644 tester/rtems/testing/renode.cfg > > create mode 100644 tester/rtems/testing/renode_scripts/kendrytek210.resc > > > > diff --git a/tester/rtems/testing/bsps/kendrytek210-renode.ini > b/tester/rtems/testing/bsps/kendrytek210-renode.ini > > new file mode 100644 > > index 0000000..95850c5 > > --- /dev/null > > +++ b/tester/rtems/testing/bsps/kendrytek210-renode.ini > > @@ -0,0 +1,38 @@ > > +# > > +# RTEMS Tools Project (http://www.rtems.org/) > > +# Copyright 2010-2014 Chris Johns (chr...@rtems.org) > > +# All rights reserved. > > +# > > +# This file is part of the RTEMS Tools package in 'rtems-tools'. > > +# > > +# Redistribution and use in source and binary forms, with or without > > +# modification, are permitted provided that the following conditions > are met: > > +# > > +# 1. Redistributions of source code must retain the above copyright > notice, > > +# this list of conditions and the following disclaimer. > > +# > > +# 2. Redistributions in binary form must reproduce the above copyright > notice, > > +# this list of conditions and the following disclaimer in the > documentation > > +# and/or other materials provided with the distribution. > > +# > > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS > "AS IS" > > +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, > THE > > +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR > PURPOSE > > +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR > CONTRIBUTORS BE > > +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR > > +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF > > +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR > BUSINESS > > +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER > IN > > +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR > OTHERWISE) > > +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED > OF THE > > +# POSSIBILITY OF SUCH DAMAGE. > > +# > > + > > +# > > +# The Kendrytek210 Renode BSP > > +# > > +[kendrytek210-renode] > > +bsp = kendrytek210-renode > > +arch = riscv > > +tester = %{_rtscripts}/renode.cfg > > +bsp_resc_script = %{_rtscripts}/renode_scripts/kendrytek210.resc > > diff --git a/tester/rtems/testing/renode.cfg > b/tester/rtems/testing/renode.cfg > > new file mode 100644 > > index 0000000..49e84a5 > > --- /dev/null > > +++ b/tester/rtems/testing/renode.cfg > > @@ -0,0 +1,64 @@ > > +# > > +# RTEMS Tools Project (http://www.rtems.org/) > > +# Copyright 2010-2014 Chris Johns (chr...@rtems.org) > > +# All rights reserved. > > +# > > +# This file is part of the RTEMS Tools package in 'rtems-tools'. > > +# > > +# Redistribution and use in source and binary forms, with or without > > +# modification, are permitted provided that the following conditions > are met: > > +# > > +# 1. Redistributions of source code must retain the above copyright > notice, > > +# this list of conditions and the following disclaimer. > > +# > > +# 2. Redistributions in binary form must reproduce the above copyright > notice, > > +# this list of conditions and the following disclaimer in the > documentation > > +# and/or other materials provided with the distribution. > > +# > > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS > "AS IS" > > +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, > THE > > +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR > PURPOSE > > +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR > CONTRIBUTORS BE > > +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR > > +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF > > +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR > BUSINESS > > +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER > IN > > +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR > OTHERWISE) > > +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED > OF THE > > +# POSSIBILITY OF SUCH DAMAGE. > > +# > > + > > +# > > +# Renode > > +# > > +# Use a renode command to run the executable in the renode simulator. > > +# > > + > > +%include %{_configdir}/base.cfg > > +%include %{_configdir}/checks.cfg > > + > > +# > > +# Console. > > +# > > +%define console_telnet > > +%include %{_configdir}/console.cfg > > + > > +# > > +# RTEMS version > > +# > > +%include %{_rtdir}/rtems/version.cfg > > + > > + > > +# > > +# Renode executable > > +# > > +%define renode_cmd renode --hide-monitor > > +%define binary_opts -e $bin?=@%{test_executable} > > +%define start_opts -e "s @%{bsp_resc_script}" > > +%define trim_command sed 's/.*\[output\] //' > > + > > + > > +# > > +# Executable > > +# > > +%execute %{renode_cmd} %{binary_opts} %{start_opts} | %{trim_command} > > diff --git a/tester/rtems/testing/renode_scripts/kendrytek210.resc > b/tester/rtems/testing/renode_scripts/kendrytek210.resc > > new file mode 100644 > > index 0000000..fe13aa8 > > --- /dev/null > > +++ b/tester/rtems/testing/renode_scripts/kendrytek210.resc > > @@ -0,0 +1,53 @@ > > +using sysbus > > +using monitor > > + > > +mach create "K210" > > + > > +machine LoadPlatformDescription @platforms/cpus/kendryte_k210.repl > > + > > +path add @/ > > + > > +showAnalyzer "uartAnalyzer" uart > Antmicro.Renode.Analyzers.LoggingUartAnalyzer > > +uartAnalyzer TimestampFormat None > > + > > +set report_repeating_line """ > > +from Antmicro.Renode.Logging import ConsoleBackend > > +ConsoleBackend.Instance.ReportRepeatingLines = True > > +""" > > + > > +set add_hook """ > > +def match(line): > > + ok_to_kill_lines = [ > > + '*** TEST STATE: USER_INPUT', > > + '*** TEST STATE: BENCHMARK', > > + '*** END OF TEST ', > > + '*** FATAL ***' > > + ] > > + return any(l in line for l in ok_to_kill_lines) > > + > > +def hook(line): > > + monitor.Parse("q") > > + > > > +Antmicro.Renode.Hooks.UartHooksExtensions.AddLineHook(monitor.Machine["sysbus.uart"], > match, hook) > > +""" > > + > > +python $add_hook > > + > > +python $report_repeating_line > > + > > +sysbus Tag <0x50440000 0x10000> "SYSCTL" > > +sysbus Tag <0x50440018 0x4> "pll_lock" 0xFFFFFFFF > > +sysbus Tag <0x5044000C 0x4> "pll1" > > +sysbus Tag <0x50440008 0x4> "pll0" > > +sysbus Tag <0x50440020 0x4> "clk_sel0" > > +sysbus Tag <0x50440028 0x4> "clk_en_cent" > > +sysbus Tag <0x5044002c 0x4> "clk_en_peri" > > + > > +# enable uart tx > > +uart WriteDoubleWord 0x8 0x1 > > + > > +macro reset > > +""" > > + sysbus LoadELF $bin > > +""" > > +runMacro $reset > _______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel