From: Frank Kühndel <frank.kuehn...@embedded-brains.de> This is the long promised Rust on RTEMS step-by-step guide.
For reviewing it, I suggest the natural order: 1) user/rust/index.rst -- The introduction 2) user/rust/bare-metal.rst -- The step-by-step guide If you prefer reviewing the PDF or HTML, you can download them here: https://share.embedded-brains.de/index.php/s/morK77CeTdXwpc4 Some notes/questions: * I did not find the right place where to put this text. Currently, it is an extra chapter at top level in the user manual. Chapter "Quick Start" seemed not to be the right place to me. * I assume that someone (DLR?) writes a step-by-step guide for using Rust with libstd once it becomes available. This might be an additional section in an extra file next to user/rust/bare-metal.rst Moreover, the current paragraph "At the time of writing no such target exists. [...]" will then be removed/replaced. * There are a few links to external sources. Should they be deleted? * There is a sub-section on creating a container. This sub-section is completely optional. I used this container to test the instructions in a clean environment. There are good reasons to keep it in the document and there are good reasons to remove it. What do you think? * I wrote instructions to "Build the RTEMS Tools" and to "Build and Install the RTEMS BSPs". Yet, I could just refer to the "Quick Start" sections instead. I believe it is more straightforward for the reader the way it is now. Do you prefer these sections to be removed? Frank Kühndel (1): user: Add docu for use of Rust with RTEMS user/index.rst | 3 +- user/overview/index.rst | 2 + user/rust/bare-metal.rst | 549 +++++++++++++++++++++++++++++++++++++++ user/rust/index.rst | 64 +++++ 4 files changed, 617 insertions(+), 1 deletion(-) create mode 100644 user/rust/bare-metal.rst create mode 100644 user/rust/index.rst -- 2.35.3 _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel