Hello, I want to learn about seL4 so I am trying to get is started on the hardware I already have (a zynq 7000).
I have generated the image: sel4test-driver-image-arm-zynq7000 Now I try to load that onto the zynq by executing these commands in XMD: connect arm hw rst fpga -f design_1_wrapper.bit source ps7_init.tcl ps7_init ps7_post_config dow sel4test-driver-image-arm-zynq7000 run All of the above seem to be successful. Then, I have a serial link hooked up to the board (uart) and there I get the following output (screen /dev/ttyUSB1 115200) : ELF-loader started on CPU: ARM Ltd. Cortex-A9 r3p0 paddr=[10000000..103c881f] ELF-loading image 'kernel' paddr=[0..2afff] vaddr=[e0000000..e002afff] virt_entry=e0000000 But then nothing more. I am lost what to do from this position in order to continue exploring seL4. I don't even know if what I see is an indication of a problem or not. If anyone has experience in running seL4 on zynq and if you sit on knowledge you want to share, please fill me in. Thank you
_______________________________________________ Devel mailing list Devel@sel4.systems https://sel4.systems/lists/listinfo/devel